What are the precautions for inspecting a newly purchased car?

1 Answers
FinnRose
07/29/25 11:26pm
When inspecting a newly purchased car, it is important to properly keep all the relevant certificates. Typically, the 4S store will proactively hand over these certificates to the customer, including the purchase invoice, certificate of conformity, vehicle consistency certificate, motor vehicle registration certificate, warranty certificate, vehicle user manual, and new car delivery confirmation form. The inspection items for a new car include: 1. Check the body surface for scratches or dents; 2. Inspect the engine compartment and the edges under the car for signs of repainting; 3. Check if the gaps on both sides of the doors and the front hood are symmetrical and not too large or too small; 4. Test the key and lock coordination when opening the doors; 5. Inspect the windshield for any damage; 6. Check the working condition of the vehicle accessories.
Was this review help?
20
4
Share
More Forum Discussions

Is the Lamando equipped with a dry dual-clutch transmission?

The Lamando models, except for the 330TSI and Lamando GTS which use wet dual-clutch transmissions, are all equipped with dry dual-clutch transmissions. Taking the Lamando 2021 230TSI DSG Fashion Edition as an example: it is powered by a 1.4T 131-horsepower L4 turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 96 kilowatts and a maximum torque of 225 Newton-meters. The body dimensions of the Lamando 2021 230TSI DSG Fashion Edition are 4615 mm in length, 1826 mm in width, and 1425 mm in height, with a wheelbase of 2656 mm, a fuel tank capacity of 51 liters, a luggage compartment capacity ranging from 480 liters to 1150 liters, and a curb weight of 1325 kilograms.
1
1
Share

What Causes the Malfunction Light to Illuminate, Lack of Power When Accelerating, and Inability to Gain Speed?

Poor quality gasoline that does not meet standards, faulty oxygen sensor, malfunctioning air flow sensor, carbon buildup on spark plugs, engine knocking, or engine misfiring. Related explanations: 1. Carbon buildup on spark plugs: Leads to poor engine performance, resulting in unstable idling, poor acceleration, increased fuel consumption, and other abnormal phenomena. 2. Air flow sensor: Detects the intake air and converts it into an electrical signal sent to the electronic control unit (ECU), allowing the ECU to determine how much fuel to inject. 3. Oxygen sensor: Since the purification capability of the three-way catalyst for CO, HC, and NOX sharply decreases once the air-fuel ratio deviates from the theoretical value, an oxygen sensor is installed in the exhaust pipe to detect the oxygen concentration in the exhaust and send feedback signals to the ECU. The ECU then adjusts the fuel injector's fuel injection volume accordingly, keeping the air-fuel ratio close to the theoretical value.
9
2
Share

How to Repair a 12V Battery After It Runs Out of Power?

12V battery repair method after power loss: 1. Open the battery cover and remove the 6 safety caps; 2. Use a syringe to fill each hole with distilled water. If it's a 1.28 standard electrolyte, the plates may burn due to excessive acid concentration, and the acid in the battery will not evaporate. What's missing is water, so just add about 20 to 30ml of distilled water to each small hole; 3. After filling, let the battery sit for half an hour to allow the sponge around the plates to fully absorb the water, then use a resistor to discharge all the electricity from the battery; 4. After discharging, charge the battery. A pulse charging method can be used because it effectively removes plate sulfation and increases battery capacity; 5. After charging is complete, use a syringe to extract excess water from each hole; 6. Put the caps and cover back on, and the battery is ready for use in the vehicle.
2
4
Share

How many days does it take to replace a bumper at a 4S shop?

Replacing a car bumper at a 4S shop takes 3 to 4 days. The main function of the front and rear bumpers is to absorb external impact: The main function of the front and rear bumpers is to absorb external impact, effectively protecting the vehicle body and serving as a safety device for passengers. When vehicles were first introduced, bumpers were primarily made of metal. With the continuous development of the automotive industry, bumpers have been replaced with plastic materials, which serve to protect both the vehicle and pedestrians. Specific time for bumper replacement: Replacing a car bumper at a 4S shop takes 3 to 4 days. The process involves painting the bumper, which can be completed on the same day. However, it then requires 2 to 3 days for the paint to fully dry before the vehicle can be used normally. In winter, this period may be extended by 1 to 2 days.
1
1
Share

Is Automatic Transmission Subject 2 or Subject 3 Harder?

Subject 2 tests precision and basic skills, while Subject 3 tests procedures and flexibility. Many people think Subject 3 is harder because it involves driving on the road. However, in actual exams, Subject 2 tends to be more challenging. The reasons are as follows: 1. Challenges of Subject 2: Subject 2 has too many test items, and since it is the first time most people take the in-car test during the entire exam process, many feel nervous. Additionally, due to various reasons related to the test vehicle, visibility and handling are difficult to control, and the overall structure is unfamiliar. Especially when reversing into the parking space, it's easy to cross the solid line by accident. This tests the examinee's ability to adjust the seat height and rearview mirror angle properly before moving. 2. Subject 3 is about details determining success: Don’t resent the coach for being strict, because during the exam, you’ll find that listening to the coach is absolutely the right thing to do.
15
0
Share

Can the ETC be directly transferred to a new car when selling the old one?

If the new car owner did not change the license plate when purchasing the car, and the original car owner had already registered for ETC elsewhere, and the new car owner wants to re-register for ETC, then the previously linked ETC must be canceled for the ETC device to function properly. ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on." If inserting and removing twice without the electronic tag attached shows "Tag invalid," this is normal and does not affect activation. Alternatively, you can press the button on top of the electronic tag to enable Bluetooth. Turn on the phone's Bluetooth, open the corresponding mobile app (usually there is a download QR code on the electronic tag), and enter the device activation interface. Click on device connection and wait patiently for the "Connection successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.