What are the precautions for high-speed driving?

1 Answers
OPhoebe
07/25/25 2:15pm
High-speed driving precautions are: 1. Adjust the seat position and rearview mirror before driving, and fasten the seat belt; 2. Turn on the ignition key and wait for the computer self-check to complete before starting; 3. Ensure the handbrake is released before driving; 4. Keep the heel on the ground when stepping on the pedal, and slowly release the clutch and gently press the accelerator when starting; 5. Always use the turn signal and slow down when turning or changing lanes; 6. Keep your eyes level and look 100 meters ahead when driving on a clear road, not focusing on the immediate front of the car; 7. Turn on the hazard lights when parking on the roadside; 8. Apply the handbrake when parking; 9. Stay focused while driving; 10. Do not occupy two lanes for a long time.
Was this review help?
5
5
Share
More Forum Discussions

What are the precautions for beginners entering the highway?

Precautions for beginners entering the highway: 1. Check the tires; 2. Maintain a safe distance and control the speed; 3. Do not reverse if you miss the exit; 4. Do not occupy the emergency lane unless in an emergency, and change only one lane at a time; 5. The driving speed on the highway should not be lower than 80 km/h or higher than 120 km/h. With increased speed on the highway, road signs may sometimes be missed, so pay attention to observation or use navigation in advance. Even if you miss an exit, do not panic, avoid braking suddenly or making a U-turn, and continue driving to the next exit. Beginner drivers may lack sufficient driving experience, leading to misjudgments, so while controlling speed, it is also important to maintain a safe driving distance from the vehicle ahead, as following too closely can be dangerous.
10
5
Share

Can the Subject 2 Driving Test Appointment Be Cancelled After Booking?

Subject 2 driving test appointment can be cancelled after booking. If the appointment application has been successfully submitted, there is a cancellation menu on the homepage of this website, and you can cancel the appointment by following the prompts. If you have already received an SMS notification from the vehicle management office regarding the test date, you can cancel it at the vehicle management office at least one day in advance. Subject 2 is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. For small cars C1 and C2, the test items include five mandatory sections: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. For large vehicles A1, A2, A3, B1, and B2, the test items include stake test, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, driving along a curve, turning at a right angle, passing through a limited-width gate, passing through continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling.
17
4
Share

Where is the keyhole of the Baojun 510 located?

Baojun 510 keyhole locations: 1. Door keyhole: Features a hidden design. Remove the decorative cover on the door handle to reveal the keyhole; 2. The keyhole for starting the vehicle is located on the right side of the steering wheel. This is a common position, but note that some models come with a push-button start system and do not have a keyhole. The Baojun 510 is a compact SUV launched by SAIC-GM-Wuling, with dimensions of 4220mm in length, 1740mm in width, 1625mm in height, and a wheelbase of 2550mm. The Baojun 510 features a redesigned front and rear appearance, including a new high-gloss matrix grille paired with LED split-type headlights.
10
4
Share

How to Solve Unstable Idle Speed of BYD F3 When Cold?

Solutions for unstable idle speed of BYD F3 when cold: 1. Clean the throttle body; 2. Use a dedicated automotive computer to detect fault codes; 3. Replace spark plugs. Reasons for unstable idle speed when cold: 1. Dirty throttle body; 2. Faulty oxygen sensor; 3. Faulty water temperature sensor; 4. Excessive carbon deposits on spark plugs. The BYD F3 is an A+ class passenger car produced by BYD Auto, with dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, and a wheelbase of 2600mm. The interior design of the BYD F3 is simple and elegant, featuring a fresh light-colored interior and comprehensive, rich configurations.
10
3
Share

What are the reasons for the car key not responding when starting the ignition?

The reasons why the car key does not respond when starting the ignition: 1. The car battery is low on power: First, check the car battery. If the car battery is completely drained, you need to find an external power source to jump-start the car; 2. The car's ignition system has a problem: Check the car's ignition system to see if there is power in the wire entering the ignition switch; 3. The car's steering wheel is locked: Place one hand on the steering wheel and use the other hand to turn the car key back and forth. This will quickly start the car; 4. Circuit issues: Faults that cause the car not to start or respond include blown fuses, open high-voltage coils, open low-voltage circuits, detached central ignition wires, leaking distributor heads, and damaged spark plugs.
1
2
Share

What to Do If a Small Patch of Paint Comes Off the Car?

Solutions for a small patch of paint coming off the car: You can repair scratched car paint by waxing. If the surface paint of the car body has been damaged and partially peeled off, you can try to touch up the paint yourself. You need to purchase a touch-up paint pen kit with the same color code, which includes all the necessary tools for touch-up, such as sandpaper, putty, and polishing compound. If the scratch has damaged the car's primer or even caused metal deformation, the situation is very serious. If not addressed promptly, it may lead to rust in the future. To repair the primer and deformation, the paint on the affected area needs to be sanded off, followed by metal repair, and finally, repainting with all layers of paint.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.