What are the precautions for high-speed driving?

2 Answers
IrisLee
07/24/25 10:24am
Precautions for high-speed driving: 1. Conduct a thorough vehicle inspection before entering the highway, especially checking the fuel, engine oil, tire pressure, and lights, as these are frequently needed on the highway; 2. Do not arbitrarily occupy the emergency lane. The emergency lane on the highway is a rescue lane. In the event of a traffic accident during congestion, the emergency lane serves as a lifeline, so avoid using it while driving; 3. Make fine adjustments when steering on the highway; 4. Do not exceed the speed limit while driving at high speeds, especially in certain special areas where speed limits are generally lower. These areas often have more surveillance cameras and are also places where traffic violations are more likely to occur.
Was this review help?
5
1
Share
Dias
08/11/25 5:31am
When driving on the highway, I must pay attention to controlling my speed and avoid speeding to prevent loss of control or fines, usually maintaining it between 100-120 km/h. It's important to keep a safe distance, especially in heavy traffic; if the car behind is too close, I lightly tap the brakes as a reminder. While driving, always use the turn signal before changing lanes, check the mirrors and blind spots, and only proceed when it's safe. Long-distance driving can be tiring, so I take a 15-minute break every two hours to drink water and stretch; if I feel very sleepy, I pull over at a service area to nap. It's also important to avoid sudden braking or acceleration, as it's both harmful to the car and unsafe. Nighttime highway driving requires extra caution—keep the headlights on, stay focused, and reduce speed while turning on hazard lights in fog or rain. In emergencies like a tire blowout, grip the steering wheel firmly and slowly pull over to the side.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

Can I Pass the Annual Inspection After Changing the Color of the Grille?

Changing the color of the grille is a very common modification. As long as it is registered with the vehicle management office, it can pass the annual inspection. When modifying the grille, it is important to note that after installing the new grille, the original length and width of the vehicle must not be altered. Annual inspection content: Check whether the engine, chassis, body, and their attachments are clean, intact, and functional, whether the paint is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records. Check whether the vehicle's braking performance, steering control performance, lighting, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles." Check whether the vehicle has been modified, remodeled, or altered, whether the driving license, license plate, and vehicle registration records match the actual condition of the vehicle, whether there have been any changes, and whether the approval, modification, or alteration procedures have been completed. Check whether the printed license plates, driving license, and enlarged license plate numbers on the vehicle are damaged, altered, or illegible, and whether they need to be replaced. Whether the name of the unit or the street/township where the vehicle is located and the number of passengers in the cab are sprayed in Chinese characters on both sides of the door as required. Whether the rear door of a truck (including the rear door of a trailer) is sprayed with the license plate number enlarged 2-3 times as required, and whether the words "Private" are sprayed on both sides of the vehicle or door for individual or joint ownership vehicles. The characters must be clear, and no unit codes or other patterns should be sprayed (special cases require approval from the DMV).
17
1
Share

What is the issue when there is play in the front wheels shaking left and right?

Play in the front wheels shaking left and right is caused by a loose front chassis bracket or a loose ball joint. Below is relevant information about tires: 1. Tire Introduction: Tires are the only components of a car that come into contact with the ground. Some car owners only replace the tires on the drive wheels when changing tires. For example, some front-wheel-drive car owners only replace the two front tires, while some rear-wheel-drive car owners only replace the two rear tires. In fact, this practice is acceptable. 2. Tire Aging: Tires are rubber products and will age over time. It is recommended that car owners replace their tires every four years, and even if the mileage is low within those four years, they should still be replaced. Since tires can also age when left unused for long periods, it is important to check the production date when purchasing tires.
6
4
Share

What are the impacts of a car driving through water?

The impacts of a car driving through water include: 1. It may cause water to enter the engine, leading to issues such as insufficient power and shaking. Prolonged use under such conditions can result in deformation or even breakage of the piston connecting rod, ultimately damaging the engine; 2. It may cause the high-voltage ignition system to become damp or short-circuited due to water ingress, leading to engine stalling. The methods to handle a car driving through water are: 1. If the exhaust or intake ports have taken in water during the process, the car must be towed to a repair shop for inspection. Do not attempt to start the engine forcefully, as this may cause greater damage due to ineffective engine lubrication; 2. After driving through water, immediately remove any wrapping from the electrical components, dry the wet parts, reinstall the fan belt, and check whether any gearbox has been submerged, whether there are any obstructions between the radiator fins, whether the tires are damaged, or whether there is any debris entangled under the chassis. Clean the vehicle promptly to restore braking effectiveness.
12
0
Share

What Causes a Car Battery to Suddenly Lose Power?

The reasons for a car battery suddenly losing power are: 1. The battery has reached the end of its service life; 2. Engine damage; 3. Insufficient battery electrolyte or leakage; 4. A blown fuse causing the battery to lose power; 5. Corrosion of battery terminals; 6. Short circuit in the vehicle's wiring. If the battery loses power, it should be replaced or repaired promptly. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Batteries are categorized into conventional batteries, dry-charged batteries, and maintenance-free batteries. The commonly referred-to car battery is typically a lead-acid battery. The car battery is an essential part of a vehicle, providing power for starting the car and operating electronic devices inside. If the car battery suddenly loses power, it can prevent the car from starting.
8
2
Share

What Causes Severe Shaking When Reversing in a Manual Transmission Car?

Whether it's a manual or automatic transmission, different gears have varying torque levels. The reverse gear has higher torque, which increases the engine's load, making it normal for the car to shake more than in other gears. However, excessive shaking is abnormal. Below are some related explanations: 1. When shifting into reverse, always fully depress the clutch to completely disconnect the engine's power output from the transmission. It is advisable not to shift into reverse too aggressively to avoid severe gear grinding. 2. Since the direction of power transmission needs to change when the vehicle is in reverse, always ensure the car is completely stopped before shifting into reverse.
11
3
Share

What does 'Kuachuo' mean in cars?

Automobile 'Kuachuo' refers to full-time four-wheel drive. Below are relevant introductions about automobile 'Kuachuo': 1. Concept: It is the Chinese pronunciation of the English word 'quattro' for Audi's four-wheel drive. The Audi quattro system is a very famous automobile four-wheel drive system. 2. Advantages: The Audi quattro system adopts a purely mechanical full-time four-wheel drive structure. Compared to other four-wheel drives with electronic control devices, quattro is more outstanding in terms of stability, reliability, and safety than many four-wheel drive systems. At the same time, the Torsen differential it is equipped with is far superior to the common multi-plate clutch in both strength and performance.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.