···
Log in / Register

What are the precautions for entering and exiting parking lots?

4 Answers
MacPreston
07/29/25 1:00pm
Precautions for entering and exiting parking lots: Always turn on the lights; pay attention to the inside of curves when going up or down the parking lot. Always turn on the lights: Some parking lots may appear dim due to lighting issues. If you don't turn on the headlights, others may have difficulty noticing your presence, which undoubtedly poses a safety hazard. Also, note that some vehicles' self-illuminating dashboards brighten in dark areas, which can easily cause visual misjudgment. Therefore, it's advisable to turn on the headlights before entering the garage. When going up or down the parking lot, pay attention to the inside of curves: Keep a firm grip on the steering wheel and control your speed. If you look towards the outside, it's easy to deviate from the intended path. For longer vehicles, as long as you maintain a proper distance from the wall on the inside during turns, you don't need to worry about the outer front of the car scraping the wall. How to choose a parking space: It's best to avoid spots near the garage entrance/exit or at the corners of pathways. Try to choose areas well-covered by patrol personnel and surveillance cameras.
Was this review help?
16
1
Share
SanKarter
08/14/25 2:13am
I find it particularly important to pay attention to speed when entering and exiting parking lots, as the speed limit is usually very low, typically under 10 km/h, so avoid speeding to prevent collisions with pedestrians or other vehicles. Also, be mindful of blind spots, especially behind pillars, low walls, or vehicles that are reversing—once out of sight, accidents can easily occur. Observing signage is crucial, such as directions for entrances and exits, and payment rules, to avoid driving the wrong way or missing payment points. Additionally, proper use of lights is essential; ensure headlights are on when entering or exiting at night to improve visibility, but avoid using high beams to avoid dazzling others. Pedestrian safety comes first—give way to parents pushing strollers or elderly people walking. Develop the habit of checking mirrors before entering or exiting and maintaining a safe distance, as this can prevent most scrapes and scary moments. In short, be patient, take it slow, and ensure everything goes smoothly.
Was this review help?
4
1
Share
Expand All
EzraFitz
10/09/25 7:17am
When driving in and out of parking lots with kids, I take extra precautions for safety. I keep the speed extremely slow, ideally at 5 km/h, so I can brake immediately if a child suddenly runs out. I maintain a comprehensive observation of the surroundings, including checking blind spots like corners, behind trees, or parked cars, and listening for sounds to prevent unexpected movements like a dog darting out. I strictly adhere to parking signs such as one-way arrows and height restrictions, avoiding forced entry or overtaking. I also pay close attention during payment processes, like using automatic payment machines without distractions, to minimize delays for other vehicles. During peak hours at places like shopping centers, I prioritize pedestrians, allowing them to cross first and using gestures to show courtesy. Having an emergency plan is crucial—if the car has an issue, I avoid blocking exits and quickly move to a safe corner to handle it. These habits ensure the safety of my entire family.
Was this review help?
1
2
Share
Expand All
AlinaLynn
11/22/25 8:32am
I've summarized a set of experiences for frequently driving in parking lots. Controlling speed is crucial—don't exceed the posted limit to avoid sudden accidents. Watch for blind spots, like pillars or corners; pause to observe before proceeding. Follow the guidance system, clearly noting entrance and exit signs to avoid wrong-way driving. Don't forget the payment step—prepare your card or change in advance to speed up the process. Consider weather conditions; rain or snow increases braking distance, so keep all lights on for safety. In short, it becomes smooth once you develop the habit.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What is the reason for the reduced power steering performance of the Range Rover Evoque?

Power steering performance reduction is caused by a problem with the power steering assist device, making the steering feel heavy. This issue is serious, and it is recommended to go to a repair shop for inspection immediately. Weakened power steering means there may be an issue with the car's power steering pump or hydraulic lines, which could lead to sudden resistance in the steering wheel or inability to turn while driving. Below is relevant information: 1. Power Steering: Power steering assists the driver in adjusting the car's direction, reducing the effort needed to turn the steering wheel. Of course, power steering also plays a role in the safety and economy of the car. 2. Classification: Currently, the power steering systems configured in cars can be roughly divided into three types. One is the mechanical hydraulic power steering system, another is the electro-hydraulic power steering system, and the third is the electric power steering system.
19
1
Share

Is an Empty Fuel Tank Necessary When Adding Gasoline Additives?

An empty fuel tank is not strictly necessary when adding gasoline additives. It depends on which method is more convenient for operation. Here are the advantages of using automotive fuel additives: 1. Eco-friendly product: Reduces black smoke and saves fuel. It can significantly decrease engine emissions of carbon monoxide, sulfur oxides, nitrogen oxides, and hydrocarbons by over 30%. The world's first plant-based palm oil-derived fuel additive (fuel molecular ion decomposer) contains no harmful substances and substantially reduces harmful gases emitted due to incomplete combustion. 2. Increases torque value: Extends engine service life. Numerous tests prove that this automotive essence enhances engine power, delivering ideal performance. Depending on conditions, improvements can range from 15% to 25%. 3. Enhances cooling and quiets the engine: Cooling the engine and reducing noise minimizes friction and wear during engine operation. While lowering noise generation, it also effectively dissipates heat and maintains optimal engine temperature under prolonged high-temperature conditions.
4
3
Share

What is the maximum wading depth of the Jeep Compass?

According to official information, the maximum wading depth of the Jeep Compass is 48 cm. Common tire specifications include 225/60R17 and 225/55R18, with a body height of 1635-1675 mm, a curb weight of 1430-1675 kg, and it is a five-door, five-seat SUV. The maximum wading depth refers to the deepest water a vehicle can safely pass through. Generally, the maximum wading depth for sedans does not exceed 30 cm, while SUVs can handle slightly deeper water, though it is still advisable not to exceed 50 cm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 30 cm, the Audi A4 has 32 cm, the Volkswagen Sagitar has 30 cm, the Land Rover Range Rover has 90 cm, and the Toyota Highlander has 45 cm. SUVs clearly have a significantly greater wading depth than sedans. Generally, depending on the depth of the water and the vehicle's specifications, drivers should take different measures as follows: If the wading depth reaches the height of the exhaust pipe, it is still safe. Even if water enters the exhaust pipe, the pressure inside is sufficient to expel the water. As long as the engine is not turned off in the water, water will not flow back into the vehicle. If the wading depth reaches the height of the door frame, it becomes more dangerous. The vehicle's circuits, electronic components, and sensors are mostly concentrated at the bottom of the car, which could lead to short circuits, damaging critical electrical components and preventing the car from starting normally. If the wading depth reaches the height of the intake pipe, it is extremely dangerous. Driving directly into such conditions could cause the vehicle to stall immediately, resulting in permanent engine damage or rendering the engine unusable.
18
5
Share

Reasons Why the Brake Pedal of Volkswagen Lavida Cannot Be Depressed?

Volkswagen Lavida's brake pedal cannot be depressed due to reasons such as air leakage in the car's vacuum booster valve. Reasons and solutions for the brake pedal being hard to depress: The car's vacuum booster pump is leaking or malfunctioning. The force applied to depress the brake pedal is amplified by the brake booster pump. If the pump fails, the brake loses its assist, making it difficult to depress; it is necessary to check if the vacuum tube is leaking, and replace it if leakage is found; pressing the brake after the engine is turned off also relates to the brake booster pump. The brake booster pump only continuously generates vacuum when the engine is running. When the engine is off, it relies solely on the residual vacuum assist. The brake pedal might be blocked by the floor mat, preventing it from being depressed, in which case the mat should be removed; a damaged brake booster pump can also prevent the brake from being depressed, requiring replacement of the booster pump. Precautions for the brake pedal: During emergency braking, hold the steering wheel with both hands and avoid single-handed operation. The free travel of the brake pedal directly affects braking time and distance. Therefore, always check if the brake pedal's free travel is appropriate before driving. Braking actions should be swift. If the vehicle skids, release the brake pedal, but quickly correct the steering wheel. Avoid emergency braking during high-speed turns; instead, apply brakes appropriately before turning, maintain straight-line braking as much as possible, and control the turning speed. For braking at medium-low speeds or when shifting gears, press the clutch pedal before the brake pedal. For braking at medium-high speeds or above, press the brake pedal before the clutch pedal.
7
5
Share

What is the function of an automotive air conditioning expansion valve?

The primary functions of an automotive air conditioning expansion valve are throttling and controlling the flow of refrigerant. Below are the relevant details about automotive air conditioning expansion valves: 1. Function of a thermal expansion valve: The thermal expansion valve is installed at the inlet of the evaporator and is commonly referred to as the expansion valve. It has two main functions: (1) Throttling effect: High-temperature, high-pressure liquid refrigerant passes through the throttling orifice of the expansion valve, becoming low-temperature, low-pressure mist-like hydraulic refrigerant, creating conditions for refrigerant evaporation. (2) Controlling refrigerant flow: The expansion valve regulates the refrigerant flow to ensure the evaporator outlet contains only gaseous refrigerant. If the flow is too high, the outlet may contain liquid refrigerant, leading to liquid slugging in the compressor. If the refrigerant flow is too low, it may evaporate prematurely, resulting in insufficient cooling. 2. Types of thermal expansion valves: Thermal expansion valves are categorized into internally balanced and externally balanced types based on their balancing methods. Externally balanced thermal expansion valves are further divided into F-type and H-type structural configurations.
17
5
Share

Where is the coolant filler port located on the Range Rover Evoque?

The coolant filler port for the Range Rover Evoque is located under the hood, in the upper right corner of the engine. Below is some relevant information about the Range Rover Evoque: 1. Land Rover: Land Rover is world-renowned for its four-wheel-drive vehicles. Since its inception, the company has been committed to continuously improving the four-wheel-drive experience for its drivers. In the field of four-wheel-drive vehicles, Land Rover not only possesses advanced core technologies but also demonstrates a passion for four-wheel-drive vehicles. Despite continuous product improvements, Land Rover always adheres to its fine tradition of perfectly combining company values with lean design. 2. Range Rover Evoque: It is equipped with a turbocharged 2.0TSi4 engine featuring direct injection technology, delivering a maximum power output of 240 horsepower, paired with an AWF-21 six-speed automatic transmission. Additionally, the vehicle comes with MagneRide adaptive dynamic suspension and full-time four-wheel drive, while the Terrain Response system ensures its top-notch off-road performance.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.