What are the precautions for driving on the highway?

1 Answers
JanelleMarie
07/25/25 7:13am
Here are the relevant precautions: 1. Identify the driving lane, overtaking lane, and road signs: On the highway, the lane closest to the central divider is the overtaking lane. If you are not overtaking, avoid staying in the overtaking lane for extended periods. The far-right lane is usually the emergency lane; never overtake from the emergency lane as it is very dangerous. Generally, drive in the driving lane but maintain a safe distance from the vehicle ahead. 2. Driving speed: On the highway, driving slower is not necessarily safer. A speed of 80 to 100 km/h is considered safe for small vehicles (some sections may have speed limit signs, such as downhill or curved roads). Driving too slowly may cause vehicles behind to fail to brake in time, leading to rear-end collisions. 3. Always use high beams when driving at night: This improves visibility and safety. When overtaking, always use the left turn signal to indicate your intention to change lanes and overtake. After completing the overtaking maneuver, use the right turn signal to quickly return to the driving lane. The distance for overtaking and returning to the lane should be at least 100 meters, depending on your speed. 4. Exiting the highway: When exiting the highway, make sure to identify the correct exit. If you miss your exit, continue driving and take the next exit. Never reverse or make a U-turn. Many accidents occur because drivers reverse after slightly missing their exits, as vehicles behind cannot see them reversing, making it extremely dangerous. 5. Long-distance highway driving: The biggest danger during long-distance highway driving is fatigue. It’s best to have a replacement driver, as driving while fatigued is highly risky. Additionally, periodically test your brakes to ensure the braking system is functioning properly.
Was this review help?
3
3
Share
More Forum Discussions

Where is the tire pressure reset button on the new Lingpai?

The tire pressure reset button on the new Lingpai is located on the center console, labeled 'set'. The tire pressure reset is an operation to reset the tire pressure monitoring system after addressing a tire pressure fault. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a 'ding' sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. Low tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is found during inspection, drive to a tire shop promptly for repair, then reinflate the tire. If the low tire pressure warning reappears some time after inflation without any puncture, it may be due to air leakage caused by a deformed wheel hub. It is recommended to check the wheel hub and replace it if necessary.
20
0
Share

What Causes the Roof Rattle in Geely Vision?

Reasons for roof rattle in Geely Vision: detached wiring harness inside the roof lining and insufficient lubrication of the panoramic sunroof sliding rails. Detached wiring harness inside the roof lining: There are many causes for roof lining rattles. If it's caused by a detached wiring harness inside the roof lining, removing the roof lining and adding sound insulation pads should resolve the issue. If the gap is too large, applying adhesive or replacing the roof lining is recommended. Insufficient lubrication of the panoramic sunroof sliding rails: Roof lining rattles may also occur when the lubricant on the panoramic sunroof's sliding rails and seals deteriorates due to factors like temperature, humidity, and dirt buildup. Lack of lubrication in the rails can lead to prolonged rattling, poor movement, improper sealing, or even jamming and misalignment, potentially damaging the motor. Therefore, these components require relubrication, including cleaning and lubricating the front glass panel rails.
4
0
Share

Is there no black color for the Regal GS?

The Regal GS does not come in black. The Regal is only available in four colors: neon, dazzling black, constant gold, and phantom white. Color modification is possible: If you really like the black color, you can apply a black color-changing film to the vehicle after purchase. After completing the color change, you need to go to the vehicle management office to complete the registration procedures. The color change must be done after the initial registration. Modification details: The paint color of private cars can be changed, but after changing the color, you need to complete the vehicle modification registration at the vehicle management office. Modifications such as changing tires and rims, adding spoilers, lights, or exhaust pipes are considered illegal modifications. These must be restored to their original condition to pass inspections, and violators may face fines, license suspension, or other penalties.
10
3
Share

Does the Mercedes sealing gasket screw require torque installation?

Mercedes sealing gasket screws require torque installation, with the tire screw torque value approximately between 100-120Nm. Reasons for broken tire screws: First, it could be a quality issue from the original manufacturer, which is covered under warranty. Second, during previous tire changes, for convenience, the maintenance technician might have overtightened the wheel hub nuts using an impact wrench, leaving potential hazards for the wheel hub screws. Repairing broken tire screws: It is not recommended to handle it yourself. If you must do it yourself, first use a jack to remove the wheel hub nuts in a diagonal sequence, then take off the wheel hub and tire. Generally, the brake disc has removal ports reserved; you can use the spare long screw from the vehicle toolkit to push out the brake disc. If the vehicle design includes a reserved position at the bearing area, the remaining part of the screw can be unscrewed and replaced according to the screw specifications.
20
2
Share

What car accessories should be purchased for a new car?

For a new car, the car accessories you need to purchase can be selected based on your own needs, including dash cams, car air purifiers, headrests and seat cushions, etc. Here is the relevant information: 1. Dash Cam: The purpose of buying a dash cam is to prevent fraud and use it to preserve evidence. Many car owners have already realized this, so now many cars are equipped with dash cams. It is recommended to buy a hidden dash cam, which integrates with your car, not affecting the aesthetics while preserving evidence. The main consideration is the clarity of the dash cam. 2. Car Air Purifier: A car air purifier is a must-have, as new cars often have odors and harmful gases like formaldehyde. Therefore, having a car air purifier is very necessary. Using it in combination with car fragrances can both purify the air and make the air inside the car fresh, achieving the best of both worlds.
20
0
Share

What is the trunk size of the BMW 1 Series?

The BMW 1 Series has a trunk capacity of 330-1150 liters. The sporty nature of the BMW 1 Series means that space is not its strong suit. The front space is acceptable, but as a rear-wheel-drive car, the transmission shaft occupies some space in the rear, reducing the comfort of rear passengers. Overview of the trunk: The trunk can be opened or closed electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. Basic structure of the trunk: The basic structure consists of two spindle-driven rods. The drive rod, through a spindle drive, is composed of an inner tube and an outer tube. The motor and gear inside the inner tube drive a threaded spindle, which moves along a threaded nut fixed to the inner side of the outer tube.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.