···
Log in / Register

What are the precautions for driving on highways?

3 Answers
Cody
07/24/25 8:28am
Precautions for driving on highways include: 1. Passing through toll stations. There are two ways to pass through the toll station when entering the highway: one is the ETC lane, and the other is the regular lane. ETC refers to the bank card and card reader attached to the windshield; 2. Driving on the ramp. On the ramp, maintain a speed below 40 kilometers per hour, and do not overtake, make U-turns, stop, or reverse; 3. Acceleration lane. After exiting the ramp, you enter the acceleration lane, where you need to quickly increase your speed and merge left into the main traffic lane. When merging from the acceleration lane into the main traffic lane, be sure to yield, use your turn signal, honk, and observe to ensure you do not affect other vehicles before entering the highway's main traffic lane.
Was this review help?
19
4
Share
PrestonRose
08/11/25 1:07am
When driving on highways, I prioritize safe driving. Planning the route in advance is crucial to avoid last-minute lane changes and panic. Maintain a steady speed, neither exceeding the limit nor driving too slowly, always within the legal limit. Keep a sufficient following distance, ideally following the two-second rule, to allow ample reaction time. Always use turn signals when changing lanes and check the rearview mirror before moving. Weather can be unpredictable—turn on fog lights and reduce speed in rain or fog. Use headlights at night but avoid high beams that may blind others. Fatigue driving is a major hazard; take at least a 15-minute break every two hours to stretch and refresh. In emergencies like a flat tire, grip the steering wheel firmly and slowly pull over to the emergency lane. Overall, stay calm, focus on driving, and prioritize safety.
Was this review help?
9
5
Share
Expand All
JosephLee
09/25/25 2:10am
For frequent long-distance drivers, vehicle condition checks are crucial. Before setting off, always check tire pressure and tread wear to ensure they are within standard ranges. The braking system must be responsive—listen for any unusual noises. Fluids like engine oil and coolant must be at adequate levels. Ensure all lights are functioning, especially brake lights and turn signals, for clear signaling. Don't forget to carry a spare tire and tools in case of a flat tire. Highway noise can be loud; control music volume to avoid impairing hearing. Take breaks at rest stops to stay hydrated and snack for energy. After the trip, perform a quick inspection to prolong your vehicle's lifespan.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What is the function of a convex mirror?

The functions of a convex mirror are as follows: 1. The convex mirror on a car's rearview mirror is designed to expand the field of view, displaying more objects, and assisting the driver in better seeing the road conditions behind. 2. The convex lens in car headlights can converge light and also gather scattered light into parallel beams. 3. Car headlights use convex lenses to transform the light emitted by the bulb into parallel beams, allowing it to illuminate farther distances. Introduction to convex mirrors: 1. A convex mirror, also known as a wide-angle mirror, reflector, or corner mirror, is primarily used at various curves and intersections to broaden the driver's field of vision, enabling earlier detection of oncoming vehicles around bends, thereby reducing the occurrence of traffic accidents; it is also used for theft prevention in supermarkets and monitoring blind spots. 2. A convex lens is composed of two transparent spherical surfaces; it refracts light to form images, which can be inverted and magnified, equal in size, reduced real images, or upright and magnified virtual images.
12
0
Share

What are the engine displacements of the Prado?

The Prado comes with engine displacements of 2.7L, 3.5L, and 4.0L. Engine displacement refers to the volume of fluid that an engine can intake or exhaust per stroke or cycle. Taking the 2019 Prado as an example, its body dimensions are: length 4840mm, width 1885mm, height 1890mm, with a wheelbase of 2790mm and a fuel tank capacity of 87L. The 2019 Prado features a double-wishbone independent front suspension and a four-link non-independent rear suspension. It is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280PS, a maximum power of 206kW, and a maximum torque of 365Nm, paired with a 6-speed automatic transmission.
12
4
Share

What are the reasons for the transmission warning light in Trumpchi vehicles?

The reasons for the transmission warning light in Trumpchi vehicles are: 1. Lack of automatic transmission fluid; 2. Failure to increase starting speed due to one-way clutch slippage; 3. Engine oil leakage; 4. Ignition coil or circuit malfunction. Taking the 2021 manual luxury edition Trumpchi GS4 as an example, its body dimensions are: 4545mm in length, 1856mm in width, 1700mm in height, with a wheelbase of 2680mm. The 2021 manual luxury edition Trumpchi GS4 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 265Nm.
19
4
Share

What is the method for shifting gears in a manual transmission?

Manual transmission shifting method is: 1. Before shifting, observe the engine speed. Manual transmission vehicles should shift gears when the RPM reaches 2000 to 2500, which prevents issues like sluggish acceleration, jerking, or unresponsive throttle after shifting; 2. Once the RPM meets the condition, fully depress the clutch pedal while releasing the throttle, then move the gear lever to the corresponding position; 3. After engaging the gear, gradually release the clutch to the half-engagement point. When the vehicle's power output and transmission system connect smoothly, gently press the throttle to apply power, then slowly release the clutch completely. Manual transmission requires manually moving the gearshift lever to change gear meshing positions inside the transmission, thereby altering gear ratios to achieve speed variation.
9
2
Share

When will the China VI policy be implemented?

The China VI standard will be officially implemented on July 1, 2023. The China VI standard is divided into two phases, a and b. Starting from July 1, 2019 at the earliest, all light-duty vehicles sold and registered must comply with China VI. The requirements for the two phases are as follows: 1. Phase a requirement: By July 1, 2023 at the latest, all light-duty vehicles sold and registered must comply with China VI. 2. Phase b limit requirement: This means that China VI a can only be considered a transitional phase, while China VI b is the true China VI phase. Note: Currently, some regions have implemented the China VI emission standard ahead of schedule. For example, Guangzhou implemented the China VI emission standard for light-duty gasoline and diesel vehicles starting from March 1, 2019; Shenzhen required light-duty diesel vehicles to comply with the China VI standard from July 1, 2018, and light-duty gasoline vehicles to comply with the China VI standard from July 1, 2019.
3
0
Share

How to reset the maintenance light on an Audi A6?

Audi A6 maintenance light reset method is: 1. Press the CAR button, at which point the MMI display will show the vehicle system interface; 2. Rotate the knob to select "Maintenance and Inspection," then press the knob to confirm entry into the maintenance and inspection interface; 3. Under the maintenance and inspection submenu, select "Maintenance Cycle," press the knob to confirm entry into the next submenu; 4. Follow the prompts to reset the maintenance cycle to complete the maintenance light reset. Taking the 2021 Audi A6 as an example, it belongs to the mid-to-large sedan category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, and a fuel tank capacity of 73L. The 2021 Audi A6 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS and a maximum power of 140kW, paired with a 7-speed dual-clutch transmission.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.