What are the precautions for driving a concrete mixer truck?

1 Answers
LeDaniel
07/28/25 2:58pm
Due to the vehicle's height, large size, and numerous blind spots, it is essential to proceed slowly when reversing or making turns. Proper Operation: When driving a mixer truck, fuel efficiency should be prioritized. The driving techniques for a mixer truck's chassis differ from those of a passenger car. New drivers should consult experienced drivers for driving tips to avoid issues like burning out the clutch plate, which should not be mistaken for vehicle quality problems—this would be quite unfair. Safety Precautions for the Upper Structure: When operating the upper structure of the mixer truck, ensure smooth transitions between forward and reverse rotations. Movements should be gentle and steady. Since the mixing drum inherently has rotational inertia, sudden reversals can cause significant impact, increasing the risk of cracks in the steel structure welds.
Was this review help?
8
1
Share
More Forum Discussions

Is the rotation of a wheel considered translation or rotation?

Wheel rotation is a rotational phenomenon. Here are the relevant explanations: 1. Concept of rotation: In a plane, when a figure is turned around a fixed point in a certain direction by an angle, such movement is called rotation of the figure. This fixed point is called the center of rotation, and the angle of turning is called the angle of rotation. 2. Concept of translation: Translation refers to moving a figure in a certain direction by a certain distance within a plane. Such movement of a figure is called translation, which does not change the shape or size of the object; after translation, corresponding line segments are parallel (or collinear) and equal in length, corresponding angles are equal, and the line segments connecting corresponding points are parallel and equal in length; translation does not alter the shape, size, or orientation of the figure.
17
0
Share

Is the Lynk & Co 03 Four-Wheel Drive?

The Lynk & Co 03 is four-wheel drive. Below is an introduction to the four-wheel drive system of the Lynk & Co 03: 1. Four-wheel drive refers to a vehicle maintaining a four-wheel drive form throughout the entire driving process, with the engine's output torque distributed to the front and rear wheels in a fixed ratio. This drive mode ensures good off-road and handling performance at all times, but it cannot adjust torque distribution according to road conditions and has higher fuel consumption. 2. On-demand four-wheel drive, on the other hand, is controlled by a computer chip to switch between two-wheel drive and four-wheel drive. On normal road surfaces, the vehicle operates in two-wheel drive mode. When encountering off-road conditions or wheel slippage, the computer detects and automatically distributes power to the other two wheels.
6
3
Share

What is the reason for the car air conditioning system not leaking under pressure but failing to achieve a complete vacuum?

If the car air conditioning system does not leak under pressure but fails to achieve a complete vacuum, the possible reasons are as follows: 1. Poor sealing: There may be leaks, or the sealing ring may be cracked, causing no leakage under positive pressure but leakage under negative pressure; 2. Damaged areas in the pipeline; 3. Leaking joints: During vacuum extraction, the joints may not be tightened properly, or the vacuum pump may be faulty; 4. Incorrect method: The repeated vacuum extraction method was not used during the process. Additional information: The car air conditioning system can cool, heat, ventilate, and purify the air inside the vehicle. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety.
12
3
Share

What are the reasons for the high fuel consumption of the Maxus?

Reasons for excessive fuel consumption include: 1. Lack of maintenance: The vehicle has not been maintained for a long time, causing the engine oil and air filter to become dirty, leading to increased fuel consumption. 2. Aging: The engine spark plugs have aged, and excessive carbon buildup affects ignition efficiency, resulting in higher fuel consumption. 3. Insufficient tire pressure: Low tire pressure increases the contact area between the tires and the ground, raising friction and driving resistance, which in turn increases fuel consumption. 4. Excessive carbon buildup: Carbon deposits can accumulate in the throttle, fuel injectors, intake ducts, and piston tops. Excessive carbon buildup in any of these areas can lead to incomplete combustion, thereby increasing fuel consumption.
2
1
Share

How many kilometers should CVT steel belts be replaced?

CVT transmission steel belts should be replaced approximately every 100,000 kilometers of transmission use. If during driving, severe transmission jerking or loud noises are noticed, it indicates that the transmission steel belt has aged and requires immediate attention at a 4S service center. Most modern CVT structures in vehicles utilize steel belt transmission. This method allows for changing the transmission ratio by adjusting the pulley size, enabling it to handle greater torque. The working principle of a CVT transmission involves altering the cone pulley size to affect the vehicle's transmission ratio, with power then transmitted via steel belts or chains. CVT chains are less durable than steel belts in practical use. Although CVT chains exert less impact on the cone pulleys, their strength is inferior to steel belts, making chain-based CVTs unsuitable for high torque applications. While steel belts may generate more noise, they can handle greater torque and offer better durability.
6
5
Share

What is the correct sequence for clutch, handbrake, and gear shifting?

First engage the gear, then release the handbrake. Below are detailed explanations: 1. Reason: When starting the vehicle, you should engage the gear before releasing the handbrake to prevent the car from rolling backward. If you release the handbrake first, the vehicle will be in neutral for a period before the gear is engaged. Moreover, when starting, you may not know whether the ground is level. If it is inclined, the car in neutral may roll backward, potentially causing an accident. 2. Key to smooth starting: Mastering the timing of the clutch's semi-engagement and coordinating it closely with the accelerator pedal. When releasing the clutch pedal, start by lifting it slightly faster. As you approach the point where the engine sound changes and the car body slightly vibrates, pause the clutch pedal at this position. Simultaneously, gradually press the accelerator pedal, then slowly lift your left foot until the clutch is fully released.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.