What are the precautions for diesel vehicles entering Tibet?

1 Answers
VanVera
07/29/25 6:05pm
Avoid the period from December to March. During winter in Tibet, temperatures are low, making it difficult to start diesel engines in cold conditions. If you must go, switch to low-temperature engine oil and diesel with a rating of -20 or -35. Try to choose Sinopec gas stations, as diesel vehicles are most sensitive to poor-quality diesel. The fuel quality at small gas stations in Tibet cannot be guaranteed. Here is additional information: For diesel vehicles entering Tibet, diesel fuel can form wax in low temperatures. If the diesel rating is unsuitable, it can affect the performance of the diesel engine. No. 0 diesel is suitable for use when the ambient temperature is above 0°C, while No. -35 can be used in environments above -35°C. No. -10 is for use above -10°C. Using winter diesel in summer has little impact on the vehicle, but using summer diesel in winter makes it difficult to start. No. -35 diesel is much more expensive than No. 0, but their combustion heat values are essentially the same. Therefore, choosing diesel suitable for the current temperature is crucial.
Was this review help?
2
2
Share
More Forum Discussions

What causes unstable idle speed, shaking, and automatic stalling in the Volkswagen Santana?

The reasons for unstable idle speed, shaking, and stalling may include: Severe engine carbon buildup: A very common cause of car shaking is a dirty throttle body or excessive carbon deposits in the fuel injectors. The solution is to clean the fuel system and check whether the idle speed motor has carbon buildup, which should be cleaned if necessary; Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system can also lead to such fault symptoms. Inspect whether the spark plugs have excessive carbon buildup and replace them if needed; Unstable fuel pressure: If you have already cleaned the engine carbon deposits, cleaned the throttle body, replaced the fuel pads and spark plugs, but still notice shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor for normal operation. If the fuel pump's supply pressure is abnormal or the intake pressure sensor values are incorrect or malfunctioning, these can cause the car to shake. Check the fuel pressure and replace components if necessary.
10
2
Share

What is the license class for driving both manual and automatic transmission?

C1 license allows driving both manual and automatic transmission vehicles. Introduction to C1 (Small Vehicle): Small and micro passenger vehicles; light and micro cargo vehicles; light, small, and micro special-purpose vehicles. Small passenger vehicles with ≤9 seats, designed maximum total mass ≤4500kg, length ≤6.0m, width ≤2.0m, height ≤2.5m. Introduction to C2 (Small Automatic Transmission Vehicle): Small and micro automatic transmission passenger vehicles; light and micro automatic transmission cargo vehicles, small passenger vehicles with ≤9 seats, designed maximum total mass ≤4500kg. Length ≤6.0m, width ≤2.0m, height ≤2.5m. Introduction to C3 (Low-Speed Cargo Vehicle): Low-speed cargo vehicles, maximum designed speed ≤70km/h, designed maximum total mass ≤4500kg. Length ≤6.0m, width ≤2.0m, height ≤2.5m.
13
1
Share

Can a Dash Cam Continue Recording After the Vehicle is Turned Off?

It depends on whether the dash cam has a parking monitoring function. If the dash cam is equipped with parking monitoring, it can continue recording after the vehicle is turned off, but the recording time is limited. Since the dash cam's power is supplied by the car, it can only operate when the car is running. Some dash cams have battery power, but the battery capacity is too small to support prolonged operation. Connecting the dash cam directly to the car battery will cause prolonged discharge, which may affect the battery's lifespan. Functions and Categories of Dash Cams: Function: A dash cam is a device that records video, audio, and other relevant information during vehicle operation. Once installed, it can capture the entire driving process, providing evidence in case of traffic accidents. Categories: The parking monitoring function of dash cams can be divided into two types—one is continuous recording, and the other is triggered recording only when the vehicle detects vibration. However, there is currently no dash cam capable of continuous long-term recording after the vehicle is turned off. Solutions for Parking Monitoring Power Supply: To enable parking monitoring, the dash cam must either have an internal rechargeable battery or be connected to the fuse box (ACC power supply). After the vehicle is turned off, it enters parking monitoring mode, where the sensor continuously checks the vehicle's status. If any abnormality or vibration is detected, it automatically records and stores the footage separately. Compared to direct battery connection, dash cams with parking monitoring connected to the fuse box (ACC) are more power-efficient and reduce harm to the car battery. However, if the vehicle remains unused for several days, the battery may still drain, making it difficult to start the car. Another solution is to use a power bank to supply electricity for parking monitoring. However, this method has its drawbacks, primarily concerning the quality of the power bank. In high-temperature conditions, the power bank may overheat or even explode, leading to more severe damage.
4
3
Share

Is Castrol 10w40 Semi-Synthetic?

Castrol 10w40 is a semi-synthetic engine oil. Definition of semi-synthetic oil: Semi-synthetic oil is a type of automotive engine oil that uses semi-synthetic base oil. Vehicles using semi-synthetic oil typically require an oil change every 7,500 kilometers, whereas conventional oil usually needs to be changed every three months. Oil change and selection: The frequency of oil changes should be determined based on actual driving conditions and habits. In harsh driving environments, oil changes may need to be performed earlier. The timing of an oil change is not fixed and requires the car owner to make a reasonable choice. The type of engine oil should also be selected according to the recommendations in the vehicle's maintenance manual.
14
2
Share

Should Accident-Damaged Cars Be Repaired or Have Parts Replaced?

According to insurance industry practices, for parts that can be either repaired or replaced, repair should be prioritized. For parts that cannot be repaired, the insurance company will approve their replacement. Basic introduction to insurance claims: Article 223 of the Insurance Law stipulates that after the occurrence of an insured event, when the policyholder, the insured, or the beneficiary requests the insurer to compensate or pay insurance benefits in accordance with the insurance contract, they shall provide the insurer with the proofs and materials they can provide related to confirming the nature, cause, and extent of the loss of the insured event. Claim methods: After an insured event occurs, insurance companies settle claims with policyholders in two ways according to the insurance contract: indemnity and payment. Indemnity corresponds to property insurance and refers to the compensation made by the insurance company based on the extent of damage to the insured property at the time of the insured event, within the insurance amount, for the loss suffered by the insured. Insurance compensation is compensatory in nature, meaning it only compensates for the actual loss, at most equivalent to the value of the damaged property, and never more than its value.
11
1
Share

Is It Legal to Drive Without Rearview Mirrors?

Driving without rearview mirrors is not permitted. Relevant regulations: Article 13 of China's Road Traffic Safety Law stipulates that motor vehicles registered for road use must undergo regular safety technical inspections in accordance with laws and administrative regulations, based on factors such as vehicle purpose, passenger/cargo capacity, and service life. When presenting a vehicle's driving license and compulsory third-party liability insurance certificate, the inspection institution must conduct the inspection without imposing additional conditions. Vehicles meeting national safety standards shall receive inspection approval marks from traffic management authorities. Proper use of rearview mirrors: Before changing driving routes (parking, starting, overtaking, turning, or U-turns), always signal first while carefully checking rearview mirrors to monitor traffic conditions on both sides and behind, preventing unexpected situations. Adjust mirror positions and angles before driving. During operation, vehicle vibrations may alter mirror settings - observe and readjust promptly. In crowded areas like markets or intersections, proceed slowly while monitoring mirrors. When passing narrow roads or bridges with non-motorized vehicles/pedestrians, reduce speed and check mirrors appropriately while maintaining safe lateral distances. Maintain safe following distances with preceding vehicles while using mirrors to assess trailing vehicles' proximity, ensuring informed decision-making to avoid rear-end collisions. Before anticipatory braking, check mirrors to evaluate following vehicles' positions and relative speeds when determining braking intensity. At intersections with multiple conflict points, reduce speed while observing pedestrians and vehicles on both sides to ensure safe passage.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.