···
Log in / Register

What are the precautions for deducting points from a driver's license?

5 Answers
DeBrooklyn
07/29/25 12:06am

Precautions for deducting points from a driver's license are as follows: Clearance cycle: The cumulative scoring cycle for road traffic safety violations is 12 months, with a full score of 12 points, calculated from the date the motor vehicle driver's license is first obtained, and so on in a continuous cycle. Difference of deducting 1 point: If the driver's license has not accumulated 12 points, it will be directly cleared before the start of the next scoring cycle, and can continue to be used. However, if 12 points or a cumulative total of 24 points are accumulated, it becomes more troublesome. Within one scoring cycle, if 12 points are accumulated, you need to retake Subject One; if 24 points are reached, not only Subject One but also Subject Three must be studied. License point clearance: According to regulations, within one scoring cycle, one driver's license can clear points for a maximum of three vehicles; one vehicle can also only accept point clearance from a maximum of three driver's licenses.

Was this review help?
11
4
Share
DelAllie
08/12/25 3:18am

As a novice driver just starting out, I received a ticket on my first drive and later realized the importance of penalty points: seemingly minor infractions like speeding or running a red light can deduct anywhere from 3 to 12 points per violation. It's essential to regularly check your violation records, such as through traffic management apps, to promptly address tickets and avoid delays. Accumulating 12 points means retaking the driving test, which wastes both time and money. Also, avoid drunk or fatigued driving, as these directly threaten safety. Develop good habits: study traffic rules more, avoid distractions like phone use while driving, especially yielding to pedestrians when turning. New drivers often overlook these. My advice is to set a monthly reminder to check your points—one mistake could affect your license validity. In short, cautious driving not only protects you but also reduces family burdens.

Was this review help?
10
0
Share
Expand All
LeLily
10/01/25 6:52am

Having driven for over a decade, I've witnessed many people lose their licenses due to point deductions. The key is prevention: obey speed limits and traffic signals, familiarize yourself with road conditions, regularly check violation notices, and don't wait for the police to come knocking. Understanding regional differences in point deduction standards is crucial—some cities strictly penalize illegal parking with points. Stay calm while driving, avoid aggressive overtaking, and you'll reduce accidents. Additionally, handle tickets promptly through official channels to avoid doubled fines for late payments. Many veteran drivers mistakenly believe they can pay to resolve a 12-point deduction—this is entirely false. The reality is they must retake driving courses and exams, which requires significant effort. Regular vehicle maintenance is also vital, as violations caused by malfunctions like brake failure may also incur points.

Was this review help?
11
5
Share
Expand All
SimonLynn
11/14/25 8:38am

I usually drive my kids to and from school, and I'm extra careful because safety comes first. The main things to watch out for to avoid losing points on your driver's license are: don't speed, don't run red lights, and always wear your seatbelt—these basic rules can prevent most point deductions. Each traffic violation can cost you 2 to 6 points, and if you accumulate 12 points, you'll lose your license and have to go through the hassle of retaking the test. Make it a habit to check your points regularly on your phone, and don't delay handling any violations. Also, educate your family not to distract the driver while in the car. Developing good daily habits, like checking your lights before driving and slowing down in the rain, can significantly reduce the risk of accidents. After all, driving with the fear of losing points makes the whole family uneasy.

Was this review help?
16
4
Share
Expand All
VanTyler
01/05/26 3:29am

As a professional driver who's constantly on the road, penalty points directly affect my livelihood. Practical precautions: First, speeding on highways is the easiest way to get penalized - strictly observe speed limits. Second, frequent lane changes or not following directional markings can also be captured by cameras, with each violation accumulating points that can become problematic over time. Handle tickets promptly - I make it a habit to check the app weekly to avoid overdue penalties, which increase fines and additional points. Also pay attention to vehicle maintenance, like malfunctioning signal lights or illegal parking, which can trigger penalties. For commercial vehicles, accumulating 12 points not only means license suspension but could cost you your job. That's why maintaining a violation log is crucial - I always carry a notebook to record infractions.

Was this review help?
13
2
Share
Expand All
More Forum Discussions

What Causes Frost or Water Droplets on the Low-Pressure Pipe of a Car's Air Conditioning System?

Introduction to the causes of frost or water droplets on the low-pressure pipe of a car's air conditioning system: 1. Normal Frosting: When the air conditioner starts running, both the condensation temperature and pressure are relatively low, causing the capillary tube's refrigerant supply to be below the normal level, which in turn lowers the evaporation pressure. This leads to frost formation on the low-pressure supply pipe. However, this frosting and melting process is temporary, usually beginning shortly after the compressor starts. The entire process typically concludes within 5 minutes, after which the air conditioner operates normally. 2. Clogged Refrigeration System Preventing Normal Refrigerant Circulation: If there is a restriction in the connecting pipes, inspect the pipeline for blockages or bends. If found, this indicates a flow restriction, and replacing the pipe may be necessary. Regular car maintenance is beneficial for the proper functioning of the air conditioning system. 3. Clogged Air Conditioning Filter: Blockages often occur at the filter outlet or capillary tube inlet. A partial blockage creates a throttling effect, reducing the pressure below the normal operating level and causing frost on the supply pipe. 4. Refrigerant Leakage Leading to Insufficient Refrigerant: A lack of refrigerant can cause frost on the low-pressure supply pipe, which is a typical malfunction. This is evident when frost appears as soon as the air conditioner starts and persists even after the compressor has run for over 10 minutes. For older air conditioners, this may be normal and can be resolved by adding refrigerant. However, if this occurs in units that are only a few years old or newly installed, it likely indicates a refrigerant system leak. 5. Clogged Refrigeration System Preventing Normal Refrigerant Circulation: If there is a restriction in the connecting pipes, inspect the pipeline for blockages or bends. If found, this indicates a flow restriction, and replacing the pipe may be necessary. Regular car maintenance is beneficial for the proper functioning of the air conditioning system. 6. Clogged Air Conditioning Filter: Blockages often occur at the filter outlet or capillary tube inlet. A partial blockage creates a throttling effect, reducing the pressure below the normal operating level and causing frost on the supply pipe. 7. Refrigerant Leakage Leading to Insufficient Refrigerant: A lack of refrigerant can cause frost on the low-pressure supply pipe, which is a typical malfunction. This is evident when frost appears as soon as the air conditioner starts and persists even after the compressor has run for over 10 minutes. For older air conditioners, this may be normal and can be resolved by adding refrigerant. However, if this occurs in units that are only a few years old or newly installed, it likely indicates a refrigerant system leak.
7
2
Share

Reasons for the Engine Warning Light in Qoros 5

The engine warning light in Qoros 5 may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor combustion of air-fuel mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a caution. Issues like spark plug failure, ignition coil malfunction, fuel pump failure, or fuel line blockage can all cause poor combustion. Turbocharging problems: Intake turbocharging pipelines or turbocharger issues can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's intake system malfunctions, it may lead to engine pipeline blockages, and in severe cases, trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake issues. Exhaust problems: Exhaust system faults can also activate the engine warning light. Common causes include rear oxygen sensor failure, three-way catalytic converter issues, exhaust camshaft and bearing failures. The three-way catalytic converter is most frequently affected. Using leaded gasoline, lead/silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all contribute to catalytic converter failure. Anti-theft system malfunction: If the electronic anti-theft system fails or there's a mismatch between the anti-theft controller and engine ECU, the anti-theft system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for symptoms like shaking or black smoke emission. If present, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without depressing the clutch). The vehicle will initiate self-diagnosis upon power-on. After 5-10 seconds, observe whether the warning light turns off. If the light remains on, visit a service center promptly. Technicians can use portable diagnostic tools to read fault codes, identify issues, and perform targeted repairs.
4
2
Share

Toyota Sienna Engine Model?

Toyota Sienna's engine is produced by GAC Toyota Engine Factory and is a domestically manufactured engine. The engine model for the Toyota Sienna 3.5L version is 2GRFSE, with a maximum torque of 332Nm and a maximum horsepower of 269. The 2.7L version's engine model is 2GRFKS, with a maximum torque of 253Nm and a maximum horsepower of 190. The 3.3L version's engine model is 3MZFE, with a maximum power of 405KW, a maximum torque of 242Nm, and a maximum horsepower of 230. For daily maintenance of the Toyota Sienna's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine's normal operation but also extends the overall lifespan of the radiator and engine.
2
2
Share

How to Open the Door with a GLC Mechanical Key?

The owner presses the button on the side of the car remote key to remove the mechanical key. Under the door handle on the driver's side, there is a small hole where the key can be inserted. Lift the car key upward to remove the cover on the door handle, revealing the hidden mechanical keyhole. Insert the mechanical key into the keyhole and turn it counterclockwise to unlock and open the door.
8
1
Share

How to Deal with Malibu XL Display Black Screen on Highway?

Promptly check whether there is a loose connection in the wiring. If present, it can naturally cause the central control screen to black out. In this case, simply reconnect the loose part. It could also be due to aging of the power signal cable. Try replacing it with a new one to see if the black screen issue is resolved. A faulty power supply module not only causes lag but may also lead to a black screen in severe cases. Another possible reason could be defects in the circuit design.
19
5
Share

How to Use a Car Window Breaker?

First, take out the safety hammer from the car, then directly strike the four corners of the tempered glass. Avoid hitting the center initially. When slight cracking appears, it indicates that the stress distribution inside the glass has been significantly disrupted, causing numerous cracks to form instantly. If the glass has a film, you need to exert force to kick it open, as the film has anti-shatter properties and won't detach without sufficient external force. Once the glass has loosened sufficiently, passengers can promptly and orderly exit through the window and move to a relatively safe location.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.