What are the precautions for curve driving in Subject 2?

3 Answers
OBryce
07/24/25 8:36am
Subject 2 curve driving should pay attention to: 1. Maintain driving in first gear and avoid steering too sharply. 2. After entering the curve, try to drive in a large circle. When driving into a right curve, keep the right wheel close to the right edge line of the road. 3. When entering the curve, use the steering wheel to keep the small rearview mirror on the inner side of the car's hood always at the edge of the outer white line, neither crossing the line nor staying too far from the edge line. The following are the teaching objectives of Subject 2: 1. Master the basic driving operation essentials and possess the basic ability to control the vehicle. 2. Proficiently master the basic methods of driving on the site and internal roads, possess the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
Was this review help?
16
0
Share
SanGage
08/11/25 1:15am
Curve driving is a key part of the Subject 2 exam. During my practice and test, I realized that it's essential to focus on basic operations from the start. Speed control is the top priority—maintain a low speed of 5-10 km/h, adjusting with the clutch or brake, and never accelerate too quickly. When steering, stay calm, keep your eyes on the distant curve exit instead of looking down at the ground, and turn the steering wheel gently without sudden movements. Another important point is the car's position—use the side mirrors to check if the tires are close to the edge line, and correct any deviation immediately. I’ve tried it in the car; turning too sharply can easily lead to crossing the line and failing. Also, mental preparation is crucial—take deep breaths under exam pressure and position yourself properly before each turn. Overall, patient practice significantly improves success rates, so avoid mistakes in the final stage.
Was this review help?
3
2
Share
Expand All
DelAshlyn
09/25/25 2:21am
I was really nervous about the curve driving part before the exam, but after practicing many times, I finally passed. The first key point is to slow down and maintain a very low speed, which makes it easier to adjust the direction. Second, pay attention to the steering wheel—turn it gently and follow the curve gradually, keeping a light touch to avoid oversteering. Vision is crucial; I always looked far ahead instead of staring at the ground and occasionally checked the rearview mirror to monitor the tire position to avoid crossing the line. During practice, I realized that shifting gears should be smooth, and avoid pressing the accelerator too quickly. Stay relaxed and don’t stress. Practicing these points repeatedly a few days before the exam helped me remember them well.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What does the CANCEL button in the car mean?

It is the cruise control deactivation switch. The introduction of cruise control function buttons is as follows: 1. ON/OFF button – Cruise control switch: (1) When pressing the ON/OFF button, the CRUISE/MAIN indicator light above the coolant temperature gauge illuminates. The cruise control system activates, ready to receive speed setting operations. (2) Pressing the ON/OFF button again turns off the CRUISE/MAIN indicator light. The cruise control system deactivates. 2. SET/COAST button – Speed setting/deceleration control switch (operational above 30 km/h): (1) While driving, pressing the SET/COAST button sets the current speed, and the CRUISE indicator light above the coolant temperature gauge illuminates. Release the accelerator to maintain the set speed. (2) During cruise control, pressing the SET/COAST button again decreases speed by 1.6 km/h per press. (3) Holding the SET/COAST button during cruise control gradually reduces speed. 3. RES/ACCEL button – Acceleration setting/acceleration control switch (operational above 30 km/h): (1) During cruise control, pressing the RES/ACCEL button increases speed by 1.6 km/h per press. (2) Holding the RES/ACCEL button during cruise control continuously increases speed. (3) During cruise control, pressing the CANCEL button temporarily deactivates cruise control. Pressing the RES/ACCEL button again causes rapid acceleration to the previously set cruise speed. 4. CANCEL button – Cruise control deactivation switch: Pressing the CANCEL button during cruise control temporarily deactivates the system, turning off the CRUISE indicator light above the coolant temperature gauge.
12
4
Share

What is the name of the Touareg's suspension system?

The Touareg's suspension system is called a multi-link independent suspension. The multi-link independent suspension provides a more refined road handling feel while also enhancing the comfort of the vehicle. It can be seen as splitting the A-arm into front and rear control arms, so the hinge points between the control arms and the steering knuckle increase from one to two. The Touareg is a mid-size sports utility vehicle under the Volkswagen Group, with body dimensions of 4878mm in length, 1984mm in width, and 1717mm in height, and a wheelbase of 2899mm. The Touareg is equipped with features such as dynamic bumper side guards, a two-piece panoramic sunroof, and power-adjustable and folding exterior mirrors.
11
5
Share

What Type of Engine Oil Should Be Used in Summer?

In summer, 10W40 or 10W30 engine oil is generally recommended, as the oil type is clearly labeled on the bottle. When using your vehicle in summer, ensure proper lubrication while selecting engine oil with the lowest possible viscosity based on the temperature range, engine temperature, and actual vehicle condition. For engines in good condition with minimal wear, a lower viscosity oil is suitable. For engines with significant wear and larger clearances, a slightly higher viscosity oil may be appropriate. Engine oil, also known as motor lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, and shock absorption.
2
5
Share

What is the equivalent Chinese emission standard for Euro 3?

Euro 3 emission standard is equivalent to China's National III emission standard. The National III emission standard is the abbreviation for the third phase of China's national emission standards. Vehicle emissions refer to harmful gases discharged from exhaust, including CO (carbon monoxide), HC plus NOx (hydrocarbons and nitrogen oxides), PM (particulates, soot), etc., all of which are harmful gases produced during engine combustion. The European standards are implemented through the emission regulations of the United Nations Economic Commission for Europe (ECE) and the emission directives of the European Economic Community (EEC). The EEC is now the European Union (EU), where emission regulations are voluntarily recognized by ECE member countries, while emission directives are mandatory for EEC or EU member countries.
15
1
Share

Why Does the Steering Wheel Squeak When Turning?

The reasons for squeaking sounds when turning the steering wheel are as follows: 1. Friction between plastic components. As temperatures drop, plastic hardens, potentially causing friction noises. 2. Abnormal sounds from the steering wheel airbag clock spring. 3. Aging of the tie rod end ball joint, which can cause steering wheel vibration and noise. 4. Noise from the stabilizer bar; loose or damaged stabilizer bar bushings will not only produce sounds when turning the steering wheel but also when driving over uneven roads. 5. Noise from the shock absorber top bearing. 6. Steering gear malfunction; excessive gear clearance in the steering gear causes abnormal sounds. 7. Improper tension or aging of the power steering belt.
15
4
Share

What is the horsepower of the 4102 diesel engine?

4102 engine is 120 horsepower. More information about the 4102 engine is as follows: 1. The number 4 represents the number of engine cylinders, 102 represents the cylinder diameter, total piston displacement: 3.76L, cooling method: forced water cooling, starting method: electric start, lubrication method: pressure and splash composite lubrication, etc. 2. The 4102 engine is basically 3.8 displacement. Now they are all turbocharged, and the power difference is not significant. However, some are four-cylinder eight-valve, which is 130 horsepower, and some are four-cylinder sixteen-valve, which is 140-150-160-170 horsepower. The so-called horsepower refers to the physical quantity of how fast a vehicle operates.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.