What are the precautions for car repairs at BMW 4S stores?

How to Control Speed in First Gear When Going Downhill?

Methods for controlling speed: 1. When driving on a long downhill section, steer gently and avoid sharp turns to prevent rollovers caused by high inertia, excessive speed, or improper steering. 2. Reduce speed before entering a long downhill slope, allowing the vehicle to proceed at a slow pace. 3. Shift into an appropriate gear before descending; generally, second or third gear should be selected. It is strictly prohibited to shift gears after entering the downhill section. 4. Test the braking performance before descending. If any faults are detected, resolve them before proceeding. During the descent, apply brakes intermittently to effectively control the vehicle's speed. Avoid using emergency braking whenever possible. If emergency braking is necessary, ensure the vehicle is moving straight before applying the brakes. 5. When going downhill, coasting in neutral is strictly prohibited. Always engage an appropriate gear to utilize the engine's braking effect and reduce the vehicle's coasting speed.

20

4

Share

How to Remove and Install a Car Timing Belt?

Method for removing and installing a car timing belt: 1. Remove the fan pulley at the front end of the crankshaft. 2. Remove the timing gear cover of the engine. 3. After carefully observing the timing marks on the timing wheel, remove the locking plate, then the nut, and install the tensioner on the timing wheel. 4. For chain-driven structures, after observing the timing marks, remove the sprocket fixing screws and washers on the camshaft. 5. Allow the camshaft sprocket to rotate freely on the camshaft, then remove the chain, camshaft sprocket, and crankshaft sprocket together. 6. During assembly, follow the reverse order of the above steps, but ensure the timing gear on the crankshaft is properly aligned before inserting the key. 7. When removing only the timing gear from the crankshaft without removing the crankshaft itself, support the valve spring in advance to prevent its pressure from acting on the camshaft. 8. When removing the camshaft and its attached timing gear together, also remove the thrust plate located at the front of the camshaft.

16

2

Share

Should You Shift Gear Before or After Pressing the Clutch?

Press the clutch before shifting gear. The correct procedure is to start the car, then press the clutch, shift into first gear, and release the clutch to begin moving. Below are some relevant materials about car operation: For manual transmission cars, pay attention to the following points: 1. Become proficient in pressing the clutch pedal through practice, ensuring stability. Develop good habits by pressing it all the way down and releasing it slowly. 2. Coordinate the throttle and clutch. When starting, shift into first gear first, then slowly release the clutch while adding throttle at the semi-clutch state. Only release the clutch completely once the car starts moving. 3. Master the timing of gear shifting. Shift gears when the engine speed is around 2000 RPM, first reducing the throttle and then pressing the clutch. 4. Change gears frequently during driving, selecting the appropriate gear based on speed and road conditions. Infrequent gear changes can easily lead to lugging or engine over-revving, increasing car wear and fuel consumption. Therefore, it's essential to develop the habit of frequent gear shifting. 5. Ensure smooth gear shifting actions. Press the clutch all the way down and shift gears in one motion. Familiarize yourself with the gear positions and practice to improve your feel for it.

3

1

Share

What Do the Gauges on a Car Dashboard Represent?

There are generally four gauges on a car dashboard: the tachometer, speedometer, water temperature gauge, and fuel gauge. Below is relevant information about these four gauges: 1. Tachometer. Before starting the car, after the engine is turned on, the tachometer will momentarily rise. It's best to wait until the tachometer drops to 800-1000 RPM before driving. During normal driving, maintaining the RPM between 2500-3000 is optimal for engine performance. 2. Speedometer. This displays the vehicle's speed in kilometers per hour (km/h). 3. Water Temperature Gauge. The ideal position is usually in the middle, around 90°C. The engine coolant temperature should neither be too low nor too high; it needs to stay within a certain range. 4. Fuel Gauge. The fuel gauge is marked with two letters, E and F. E stands for Empty, indicating the tank is empty, while F stands for Full, indicating the tank is full. 5. Different car models may have varying dashboard configurations.

14

5

Share

Is the difference between Audi 35 and 40 significant?

The differences between Audi 35 and 40 are as follows: 1. Audi 35 represents vehicles equipped with a 1.4-liter turbocharged engine or an ultra-low power 2.0-liter turbocharged engine; Audi 40 represents vehicles equipped with a 190 horsepower 2.0-liter turbocharged engine. 2. The 1.4-liter turbocharged engine in Audi 35 has 150 horsepower, a maximum torque of 250 Nm, a maximum power speed of 5000 to 6000 rpm, and a maximum torque speed of 1750 to 3000 rpm; the 2.0-liter turbocharged engine in Audi 40 has 190 horsepower, a maximum torque of 320 Nm, a maximum power speed of 5000 rpm, and a maximum torque speed of 1600 to 4000 rpm.

7

0

Share

Reasons for Vehicle Rollback During Subject 3 Start-Up

Reasons for vehicle rollback during Subject 3 start-up: Improper operation and incorrect use of the clutch semi-engagement state. Below is relevant information about starting rollback: 1. When starting, you must first release the clutch to semi-engagement before releasing the brake to ensure no rollback occurs. 2. Before starting, you should first turn on the left turn signal and wait for a full three seconds before beginning to steer. 3. When turning, sound the horn twice, check both side mirrors, and confirm rear safety before preparing to start. 4. When starting, simultaneously press the clutch and foot brake. 5. After confirming surrounding safety, shift into first gear and release the handbrake.

5

4

Share

What are the precautions for car repairs at BMW 4S stores?

How to Control Speed in First Gear When Going Downhill?

How to Remove and Install a Car Timing Belt?

Should You Shift Gear Before or After Pressing the Clutch?

What Do the Gauges on a Car Dashboard Represent?

Is the difference between Audi 35 and 40 significant?

Reasons for Vehicle Rollback During Subject 3 Start-Up

What are the operating steps for driving an automatic transmission car downhill?

How to resolve the Audi P006800 fault?

What brand is the DS9 car?

How to distinguish between Nissan CVT7 and CVT8?