What are the precautions for automatic transmission cars?

Does the July inspection deadline mean it can be done anytime before July?

The inspection expiry date on the vehicle license is until July, specifically referring to the end of July. This means the vehicle's inspection is valid until July 31st, and the inspection must be completed before July 31st. It's important to note that the "6-year inspection exemption" for motor vehicles does not mean "no inspection" but rather "exemption from on-site inspection for 6 years". The vehicle owner or user must collect the inspection compliance mark at the traffic management department's window within the period specified on the vehicle license. Below is relevant information: 1. Timing: The inspection can be processed up to 3 months in advance. When processing the inspection, materials such as the vehicle license, compulsory traffic insurance policy, and vehicle and vessel tax payment receipt need to be provided. 2. Relevant regulations: According to Article 49 of the "Motor Vehicle Registration Regulations", the motor vehicle owner can apply for the inspection compliance mark at the vehicle management office of the registration location up to three months before the expiry of the motor vehicle inspection validity period.

16

0

Share

What happens when a car's fuel filter is clogged?

When a car's fuel filter is clogged, the following situations may occur: 1. The car is prone to stalling. After the fuel filter is clogged, the delivery of gasoline is affected, leading to insufficient fuel supply to the engine. This results in noticeable jerking while driving or shifting gears, and the car is highly likely to stall when idling; 2. The car lacks power when driving. Due to poor fuel supply, the engine's power output decreases, causing the vehicle to lack power and reduce speed; 3. The engine shakes when idling. Moderate clogging of the fuel filter not only worsens the car's power but also causes the engine to shake when the car is idling. It is necessary to clean the fuel filter promptly. The filter can be removed for cleaning. If it is a ceramic filter, it can be lit and allowed to burn out, then tapped to remove the ashes and dirt before reinstalling. If it is a paper filter, it can be cleaned in gasoline.

14

0

Share

Will mixing a little diesel in the urea solution cause damage?

Diesel and carbon soot from the exhaust can clog the vehicle's treatment system, causing the diesel to burn in the exhaust pipe and even leading to explosions. Below are some additional details: 1. When draining the urea solution from the urea tank: If the urea solution in the tank is found to be substandard, it must be replaced with qualified urea solution. Loosen the urea cap on the urea tank, drain the residual liquid, clean the urea tank thoroughly, and refill it with qualified urea solution. Check the inlet filter screen of the urea tank by opening the urea tank filler port for inspection. If the filter screen is found to be clogged, remove and clean it. 2. Precautions for diesel vehicles: When starting a diesel vehicle, do not press the accelerator pedal, and avoid rapid starts or high engine speeds. After prolonged high-speed operation of the engine, do not shut it off immediately. Instead, let it idle for about 2 minutes to allow the temperature to decrease before shutting it off to prevent heat buildup.

1

3

Share

How to adjust the time on Tiggo 3?

Tiggo 3 time adjustment method: 1. Press the one-touch start button to start the vehicle engine, then press the MODE button on the left side of the multifunction steering wheel to enter function adjustment; 2. Press and hold the adjustment button until the hour field flashes, then release it, adjust the hour by pressing the adjustment lever. After setting the hour, wait without any action, it will automatically switch to minute flashing; 3. Adjust the minutes by pressing the adjustment lever again. Once all settings are complete, release the button. Taking the 2020 Tiggo 3 as an example, its body dimensions are 4420mm in length, 1760mm in width, 1670mm in height, with a wheelbase of 2510mm and a fuel tank capacity of 55l. This car is equipped with a 1.5l naturally aspirated engine, with a maximum power of 85kw and a maximum torque of 143nm, paired with a 5-speed manual transmission.

8

1

Share

What is the fuel consumption per 100 kilometers for the Toyota Coaster?

The fuel consumption per kilometer for the Coaster is approximately 0.16 liters. Below are some related details: 1. Toyota Coaster: It is a medium-sized business reception bus produced by Toyota Motor Corporation. The Coaster comes in multiple versions, including the high-grade model (20, 23 seats), the luxury model (10-20 seats), and the 20-seat special executive version. Due to its high reliability and cost-effectiveness, the Toyota Coaster is quite common in many countries and regions, such as Africa, the Middle East, Europe, Australia, and the Caribbean, and is highly favored by minibus operators in Hong Kong. 2. Advantages: The 4.0L gasoline engine provides ample power, strong performance, reduced noise, and improved comfort; powerful acceleration ensures smoother instant speed boosts; robust power also allows for rapid heating inside the vehicle during winter.

13

2

Share

Is there a protective plate under the car fuel tank?

There is no protective plate under the car fuel tank. Extended information is as follows: 1. Pros and cons of installing a protective plate for cars: Pros: To protect the engine, especially the oil pan. Cons: It may affect the engine's downward collapse during a collision, as the engine is designed to collapse downward in a crash. Installing a protective plate might hinder this process, potentially leading to more severe injuries to passengers. 2. Reasons why high-end cars are equipped with underbody protective plates: Besides offering some protection to engine components, these plates help maintain the flatness of the chassis, creating a better aerodynamic environment. 3. Deciding whether to install a protective plate based on personal circumstances: 1) Install if driving conditions are poor: If you frequently drive in harsh environments, it's advisable to install one. 2) Not necessary for city driving: If you mainly drive on well-paved roads in the city, installing a protective plate won't make a significant difference. 3) Choose resin or plastic materials: If concerned about affecting the engine's downward collapse, opt for a resin protective plate. Resin or plastic materials offer less resistance during engine collapse.

13

5

Share

What are the precautions for automatic transmission cars?

Does the July inspection deadline mean it can be done anytime before July?

What happens when a car's fuel filter is clogged?

Will mixing a little diesel in the urea solution cause damage?

How to adjust the time on Tiggo 3?

What is the fuel consumption per 100 kilometers for the Toyota Coaster?

Is there a protective plate under the car fuel tank?

How much does the Jetour X70 Plus weigh?

What are the length, width, and height of the BAIC Huansu H3?

Should the Buick Envision use 92 or 95 octane gasoline?

Where is the cabin air filter located in the GAC Fick Jeep Cherokee?