What are the precautions for a novice driver driving on the highway for the first time?

2 Answers
DeWyatt
07/29/25 10:48pm
Here are the precautions for novice drivers on the highway: 1. Don't be too nervous, try to avoid frequent overtaking, do not drive in the fast lane, maintain a safe distance, and keep your speed moderate. 80 to 100 km/h is sufficient. If you are driving in the overtaking lane, the safest option is to turn on the left turn signal and continue driving in your original lane. At this point, other vehicles will overtake you from the driving lane. 2. When encountering large trucks, try to maintain a certain distance from them and look for an opportunity to overtake. Before overtaking a large truck on the highway, use your high beams to signal your intention to overtake. Ensure that you can safely overtake, then steer steadily and quickly pass the truck. At the moment of overtaking, your car may feel as if it is being pulled towards the truck, causing some slight shaking, which is a normal phenomenon.
Was this review help?
18
1
Share
MaggieLynn
08/16/25 12:13am
As a seasoned driver with years of highway experience, the most important safety preparations for a first-time highway driver are as follows. Before setting off, thoroughly inspect your vehicle, ensuring tire pressure is standard, brakes are responsive, and oil and fluid levels are adequate. Once on the road, maintain a steady speed within the legal limit—neither below the minimum nor exceeding the maximum—and keep a safe distance of at least 100 meters to prevent rear-end collisions. Stay in the right lane unless overtaking, always use your turn signals, and check mirrors and blind spots before changing lanes. Plan your route and rest stops, taking a break every two hours to stretch and avoid fatigue. Additionally, carry a phone charger and emergency supplies, and increase following distance and reduce speed in rain or fog. Mastering these details will help you transition smoothly to highway driving, building confidence as you gain experience.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What does a bulb with an exclamation mark mean on a car?

Yellow bulb with an exclamation mark: This is the lighting fault indicator, indicating that there is a fault with one of the car lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. The exclamation mark is a common fault indicator in cars. Besides the yellow bulb with an exclamation mark, there are four other forms of exclamation mark indicators: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a circled parenthesis, and an exclamation mark inside a parenthesis with a horizontal line below. Here’s a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a fault with the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a fault with the transmission or that the transmission lubricant is below the normal range. Transmission oil should be replaced promptly. Brake System Fault: An exclamation mark inside a circled parenthesis. This represents a brake system warning, indicating either a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: An exclamation mark inside a parenthesis with a horizontal line below. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range.
13
1
Share

What is the RPM at 80 mph for a car?

At 80 mph, the RPM of a car ranges from 2000 to 2500. The reasons for high RPM are: 1. Sudden increase in throttle opening; 2. Fuel injector leakage or blockage; 3. Slippage or damage to the air conditioning clutch; 4. Air intake system leakage; 5. Insufficient engine power output. Solutions for high RPM include: 1. Adjusting the throttle opening; 2. Replacing the fuel injector, air conditioning clutch, air intake system, or engine. The reasons for unstable RPM gauge readings are: 1. Oil accumulation and carbon buildup in the throttle; 2. Dirty intake tract; 3. Blockage in the fuel system, particularly the fuel injector; 4. Faulty intake pipe.
19
5
Share

How to Turn Off the Maintenance Reminder for the X-Trail?

The method to turn off the maintenance reminder for the X-Trail is: 1. Press the toggle button and the confirm button on the left side of the steering wheel to enter the maintenance interface; 2. Click on the maintenance option, then select the engine oil and filter option; 3. Choose the reset option below the number, adjust the number on the right to 5000 kilometers, and click confirm. Taking the 2021 X-Trail as an example, it is a compact SUV with body dimensions of: length 4675mm, width 1820mm, height 1722mm, a wheelbase of 2706mm, a minimum ground clearance of 208mm, and a body weight of 1489kg.
14
1
Share

Which country is Nissan from?

Nissan is a Japanese brand. The models under Nissan include Teana, Sylphy, X-Trail, Qashqai, Venucia, etc. Taking the 2021 Teana as an example, its body dimensions are: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, fuel tank capacity 61.3l, and curb weight 1456kg. The 2021 Teana has a MacPherson strut front suspension and a trapezoidal control arm multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 156ps, maximum power of 115kw, maximum torque of 197nm, and is paired with a CVT continuously variable transmission.
9
2
Share

What brand is the Lynk & Co 03?

Lynk & Co 03+ belongs to the Lynk & Co brand, which is a joint venture between Geely Auto Group and Volvo Car Group. Taking the 2021 Lynk & Co 03+ as an example, its body dimensions are: length 4677mm, width 1840mm, height 1461mm, with a wheelbase of 2730mm and a curb weight of 1615kg. The 2021 Lynk & Co 03+ features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 254PS, a maximum power of 187kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
6
4
Share

Where to Check the Tire Pressure Monitoring in the Lamando?

The tire pressure monitoring in the Lamando can be viewed on the dashboard. The Lamando's tire pressure monitoring system is passive, and it will alert on the dashboard when there is abnormal tire pressure. The functions of tire pressure monitoring: 1. Prevent accidents; 2. Extend the service life of tires; 3. Reduce wear and tear on vehicle components. Taking the 2021 Lamando as an example, its body dimensions are: length 4615mm, width 1826mm, height 1425mm, with a wheelbase of 2656mm. The 2021 Lamando has a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T inline 4-cylinder turbocharged engine, with a maximum horsepower of 131ps, a maximum torque of 225Nm, and a maximum power of 96kW, paired with a 7-speed dual-clutch transmission.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.