What are the precautions during the running-in period of the Hongqi HS5 new car?

1 Answers
LaJudah
07/28/25 6:19pm
During the running-in period of the Hongqi HS5 new car, it is important to avoid high-speed driving and overloading. The specific precautions are as follows: Avoid high-speed driving: Try not to let the car's speed reach 120km/h, as this can help maintain the engine's performance and prolong its lifespan. Do not overload the vehicle: Placing excessively heavy objects in the car during the running-in period undoubtedly puts pressure on the vehicle. Overloading often requires frequent gear changes, which can be very detrimental to the engine due to the constant fluctuations in gear selection. Avoid driving on extremely poor road conditions: Driving on very rough roads during the running-in period can cause significant tire wear. Moreover, prolonged driving under such conditions forces the engine to operate at high power continuously, leading to potential damage. Paying attention to this point can ensure the engine runs for hundreds of thousands of kilometers without needing repairs, whereas neglecting it might result in premature scrapping by up to 5 years.
Was this review help?
3
3
Share
More Forum Discussions

Is a Photo Required to Apply for an Electronic Driver's License?

When applying for an electronic driver's license, the applicant is required to submit a personal photo. Use of the electronic driver's license photo: For the first-time application of an electronic driver's license, the 'Traffic Management 12123' APP will automatically retrieve the applicant's previously saved photo as the electronic driver's license photo. After the electronic driver's license is generated, the applicant can voluntarily choose whether to replace the photo. If there is no saved photo, the 'Traffic Management 12123' APP will prompt the applicant to submit an electronic photo by taking a photo with a mobile phone or selecting from an album. After review by the traffic management department of the public security authority, the photo will be used to generate the electronic driver's license. Application method for the electronic driver's license: The electronic driver's license will be issued through the nationally unified 'Traffic Management 12123' APP. Drivers in cities where the APP is promoted and applied can log in to the 'Traffic Management 12123' APP and follow the prompts to apply for an electronic driver's license. It is important to note that the applicant's driver's license must be valid. If the driver's license is detained, suspended, overdue for medical examination, overdue for review, or announced to be discontinued, the applicant will not be able to apply for an electronic driver's license.
15
0
Share

What Does the Electric Vehicle Driving License Test Include?

Electric vehicle driving tests are divided into three sections: Section One, Section Two, and Section Three. The content of each section is as follows: Section One is a theoretical test, primarily covering key points of traffic regulations. A score of 90 or above is required to pass. Section Two is a practical skills test, with a passing score of 80. Section Three involves on-road skills testing, where a score of 90 is necessary to pass. Legal requirements for riding electric vehicles: According to the relevant provisions of China's Road Traffic Safety Law and the definitions of ordinary electric vehicles and electric motorcycles, driving an electric motorcycle requires a motorcycle driving license (with the driving code 'E') as per the regulations.
6
2
Share

Can You Still Drive with 196 kPa Tire Pressure?

Tire pressure of 196 kPa is not suitable for normal driving, and it is recommended to inflate the tires as soon as possible. Low tire pressure increases the contact area between the tire and the ground, leading to abnormal temperature rises inside the tire during driving. Additionally, severe deformation of the tire sidewall accelerates the aging of internal steel wires and fabric layers, increasing the risk of a blowout. It also raises fuel consumption and reduces tire lifespan. The relationship between tire pressure and vehicle handling stability: Cornering stiffness is a crucial parameter determining vehicle handling stability. Tires should have high cornering stiffness to ensure good handling stability. Tire pressure significantly affects cornering stiffness—higher pressure increases stiffness, but beyond a certain point, stiffness no longer changes. Introduction to standard tire pressure: According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar.
10
3
Share

Is it necessary to install a 360-degree panoramic camera?

It is essential to install a 360-degree panoramic camera in a car, especially for the rearview assistance which significantly improves reversing. Installation positions for the 360-degree panoramic camera: Four cameras provide a comprehensive view of all blind spots around the vehicle: one is positioned at the front grille, one at the rear license plate light, and the other two on the side mirrors. Precautions for using a 360-degree panoramic camera: The current reversing camera system still has certain blind spots, especially when children are near the left or right sides of the rear bumper. According to IHS, since the reversing camera system has its limitations, it should only be used as an aid for reversing to confirm safety conditions behind the vehicle and should not be solely relied upon for reversing.
1
4
Share

48V Mild Hybrid: Blue License Plate or Green License Plate?

48V mild hybrid vehicles are the same as regular vehicles and require a blue license plate. Only pure electric vehicles or plug-in hybrid vehicles are eligible for green license plates. Principle of mild hybrid vehicles: It essentially involves adding a 48V electric motor to a fuel-powered car. This motor assists the engine during vehicle startup, resulting in improved smoothness, enhanced fuel efficiency, and reduced fuel consumption. Pros and cons of mild hybrid vehicles: While it offers smoother starts and relatively lower fuel consumption, its selling price is slightly higher than that of pure fuel-powered vehicles.
15
0
Share

What procedures are required for transferring to another driving school?

Procedures for transferring to another driving school: The student needs to obtain a transfer certificate from the original driving school, then retrieve their personal file from the vehicle management office or the driving school, and finally report to the new driving school with the file and the transfer certificate. Additional information about driving schools: A driving school is a training institution that teaches vehicle driving methods and driving ethics, and assists students in obtaining a driver's license by passing the examinations administered by the vehicle management department. The curriculum of a driving school generally includes theoretical and practical courses. Theoretical courses cover driving ethics, road traffic management regulations, driving principles and methods, automobile structure and maintenance basics, first aid knowledge, etc. Practical courses include starting, turning, parking, accelerating, shifting gears, and decelerating. Points to note when transferring to another driving school: Driving schools in different locations can transfer student records, which is considered a contract termination. If certain exams have already been taken, the corresponding exam fees will be deducted when refunding the tuition. Specific details should be based on the contract terms regarding unilateral termination.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.