What are the precautions and details for the reverse parking test in Subject 2?

[DelAnderson]

Reverse parking techniques: Drive the car to the starting position: The distance between the car body and the line, the car body should cover the white line in front of the right side of the parking space, but not exceed it. When reversing, pay attention to aligning with the reference points: Turn the steering wheel fully, just as you practiced, and align with the parking space reference points through the rearview mirror. After the car enters the parking space, make sure the car is straight and the wheels are straightened: Do not turn left or right. After entering the parking space, be careful not to reverse too much: Stop immediately once parked. When exiting to the left, pay attention to: Check the distance between the left side of the car body and the parking space line, and adjust the steering wheel appropriately. When exiting to the left, make sure to reach the designated position. Throughout the entire process: Do not stop, do not let the car roll, do not shift gears incorrectly, do not stall the engine, and do not cross the lines. (Some lines must not be crossed).

[TannerLynn]

During the Subject 2 reverse parking test, I found that controlling the speed is crucial. You must drive slowly to adjust the direction in time. Before entering the garage, observe the rearview mirror to judge the position of the car body, and the timing of steering must be precise—turning too early may cause the car to touch the boundary line, while turning too late may result in the rear of the car going out of bounds. Pay attention to details such as the stopping point and reference objects, like the marker lines set in the test site, ensuring to slowly turn the steering wheel back to center when the wheels press against the corner of the garage. Stay calm and don’t get nervous; common mistakes include sudden braking causing the engine to stall or reversing too far. Practice more in simulated real scenarios. It’s best to visit the test site a few times before the exam to familiarize yourself with the layout and reduce mistakes. During the test, stay calm, repeatedly check the rearview mirror for minor angle adjustments, and remember these points to greatly improve the pass rate.

[VanBriella]

When taking the Subject 2 test for reverse parking, the most challenging part is steering wheel operation. Beginners are advised to start practicing at a slow speed and accurately locate the parking point. The key detail lies in the parallel relationship between the car body and the parking lines—observe the gap between the car and the lines through the rearview mirror, ensuring it doesn’t exceed 30 cm. When turning, rotate the steering wheel at a steady pace, and make slight adjustments after reversing to prevent the rear of the car from crossing the line. Also, pay attention to environmental factors, such as lighting conditions affecting visibility, and use the interior rearview mirror to assist in judging the position. Mentally, avoid overthinking past failures and focus on the current steps. Warm up with full simulations before the test to reduce panic—these practices will help you perform more smoothly during the actual test.

[Jeff]

My experience with reverse parking emphasizes focusing on the turning point and mirror observation. Slow down and control the speed with first gear; when parking, steer the wheel precisely, usually straightening it when the rear wheels cross the line, avoiding the boundary lines. A commonly overlooked detail is adjusting the car body—use the mirrors to check if the tires are parallel and make slight steering adjustments as needed. If you're nervous during the test, take a deep breath first and ensure the steps are followed in order.