What are the precautions and details for the automatic transmission Subject 3 driving test?

1 Answers
TeaganLynn
07/28/25 4:39pm
After completing the vehicle inspection and before the lighting test, check whether the lights have been reset, and whether the gear and handbrake are in the correct positions. When reaching the lane change area, complete the lane change after turning on the turn signal. During driving, pay attention to observing intersections and turning your head before changing lanes.
Was this review help?
8
0
Share
More Forum Discussions

Are Winter Tires Noisier Than All-Season Tires?

Winter tires are noisier. Advantages of winter tires: Compared to regular tires, winter tires use a special compound to increase friction with snow and ice surfaces. Their advantage lies in improving traction and safety on snowy and icy roads. The tread material of winter tires is softer, and the carefully formulated silica rubber compound allows for better contact with slippery ice surfaces, generating greater friction than all-season tires. This significantly enhances vehicle handling and safety on icy surfaces. Principle of winter tires: The tread that contacts the road surface uses a special silica-containing compound to ensure the tire remains exceptionally soft even at extremely low temperatures, providing excellent ice grip. The tread pattern typically employs cross-Z siping technology, which not only improves braking performance on snow/ice and shortens braking distances but also delivers ideal traction.
11
5
Share

How to Replace the Fog Light Grille on a BMW 3 Series?

The method for replacing the fog light grille on a BMW 3 Series is as follows: 1. Remove the bumper; 2. Unscrew the bolts and take off the fog light grille; 3. Install the new grille in the reverse direction; 4. Tighten the bolts and reinstall the bumper. The BMW 3 Series is a mid-size car with body dimensions of length 4719mm, width 1827mm, height 1459mm, a wheelbase of 2851mm, and a fuel tank capacity of 59 liters. The BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum power of 115kW, with the maximum power rpm ranging from 4500 to 6500 per minute.
3
5
Share

Where is the AUX interface in the 2012 Crosstour?

The AUX interface of the 2012 Crosstour is located inside the armrest box. The AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio from electronic products can be connected to the car audio through the headphone jack and AUX interface, and the audio can be played on the car audio broadcasting facilities. The USB interface can be used to insert a USB flash drive to play audio. When using it, connect one end to the AUX interface and the other end to a mobile phone, MP3, MP4, or other video player. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will also stop (the interface is generally a 3.5mm standard headphone jack). Aux is the abbreviation of Auxiliary. It is an additional signal line design. In general audio equipment, in addition to the official output and input terminals, there are often several input and output terminals marked with Aux as a backup connection terminal. When there are special applications, such as additional audio output or input, this terminal can be used. This kind of backup terminal or line, regardless of input or output, is collectively called Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, and can also be connected to a MODEM through a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because the configuration environments they are suitable for are different. The AUX interface establishes a command-line connection between the user and the device, performing some operations that usually cannot be completed in user mode, such as initialization, restoring the initial configuration, and correcting abnormal user modes. It provides a fixed port for the device, which can be used as a normal asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup of hardware products can be achieved. Note: When using the AUX interface, pay attention to buying the correct connecting cable and ensure not to plug the audio cable into the wrong port. It is best to follow the steps in the product's user manual when using the AUX interface. If you still don't know how, you can consult the product's official website or call for advice.
18
5
Share

What are the body dimensions of the Nissan Teana?

Nissan Teana's body dimensions are 4901/1850/1447mm, which are official data. The length of the Nissan Teana refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle support plane. The Nissan Teana is equipped with an EA211-DJS 1.4T L4 turbocharged engine. This engine has a maximum horsepower of 150PS, a maximum power of 110kW, a maximum power speed of 5000-6000rpm, a maximum torque of 250Nm, and a maximum torque speed of 1750-3000rpm. It is paired with a 5-speed manual transmission and a 6-speed automatic manual transmission. The state has relevant regulations regarding the dimensions of vehicles. According to the national standard "GB1589-89" issued, the total width of a vehicle does not include rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data lies in providing enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the state stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of relevant public roads.
17
3
Share

What is the model and specification of the Sonata 8 tires?

The tire specification for the Sonata 8 is 225/45R18. The first number, 225, represents the tire width in millimeters (225MM). The 45 indicates the aspect ratio of the tire's cross-section is 45%, meaning the height of the cross-section is 45% of the width. The 18 denotes the rim diameter in inches, and the middle letter "R" stands for radial tire. The Sonata 8 tires feature a fan-blade-like five-spoke design, and the spare tire is a non-full-size type. If you wish to replace the tires yourself, follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and ensure it is at a right angle to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not completely remove the nuts; just loosen them enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures that the nuts, not the tire, rotate. Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. The tire replacement is now complete. In addition to the model, the tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
11
4
Share

Which company supplies the batteries for Tesla cars?

Tesla's battery suppliers are primarily two companies: LG and Panasonic. As of now, Tesla cars use 18650 lithium-ion batteries. Tesla chose Panasonic's 18650 batteries for the following four main reasons: 1. Higher energy density with better stability and consistency; 2. Effectively reduces the cost of the battery system; 3. Billions of 18650 batteries are produced globally each year, with continuously improving safety standards; 4. Small size but high controllability, minimizing the impact of potential failures. Battery requirements: stable performance, high safety coefficient, and multiple recharge cycles.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.