What are the precautions after an engine overhaul?

1 Answers
Alice
07/28/25 4:25pm
Precautions after an engine overhaul include: 1. Avoid high engine speeds, preferably not exceeding 3000 RPM; 2. After a cold start, it's best to warm up the engine for a while before driving, usually about 5 minutes, until the water temperature changes; 3. Adhere to the vehicle's specified load capacity, preferably not exceeding 70% of the maximum load; 4. Try to avoid sudden acceleration and hard braking, as hard braking can cause significant impact damage to the engine, especially sudden acceleration, which can severely affect the running-in of new engine components and directly impact the fitting clearance between parts; 5. Anticipate sudden situations while driving, maintain a steady speed, and keep the speed between 50 to 80 kilometers per hour, but avoid prolonged low-speed driving. Pay attention to gear changes while driving and avoid staying in one gear for too long.
Was this review help?
15
3
Share
More Forum Discussions

Can a C1 License Drive All Blue Plate Trucks?

C1 license does not necessarily allow driving all blue plate trucks. A C1 license can drive trucks up to 4.5 meters in length because the total length of trucks driven with a C1 license cannot exceed 6 meters. If the truck length exceeds 6 meters, it is classified as a large truck, which a C1 license cannot drive. In addition to large trucks, a C1 license also does not permit driving tractor-trailers, large buses, city buses, medium-sized buses, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. The scope of a C1 license includes small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special operation vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Below is information on the four categories of heavy, medium, light, and micro vehicles: 1. Vehicle length ≥6m: Cargo vehicles with a total mass ≥12,000kg are classified as heavy cargo vehicles; 2. Vehicle length ≥6m: Cargo vehicles with a total mass ≥4,500kg and <12,000kg are classified as medium cargo vehicles; 3. Vehicle length <6m: Cargo vehicles with a total mass <4,500kg are classified as light cargo vehicles; 4. Vehicle length ≤3.5m: Cargo vehicles with a load capacity ≤750kg are classified as micro cargo vehicles.
9
2
Share

How to Cancel the Wrench Symbol on the 10th Generation Accord?

The process to eliminate the small wrench symbol is the same; just repeat the operation a few more times. The "small wrench" is a maintenance indicator, reminding the driver to perform timely maintenance. Here is more information about car maintenance: 1. Introduction: Car maintenance, also known as car servicing, refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. 2. Purpose: To keep the car clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, and extend the service life. 3. Types: Regular maintenance is divided into three aspects: body maintenance, interior maintenance, and body refurbishment.
8
3
Share

What are the penalties for reckless lane changing?

For illegal lane changing by vehicles, the fine is generally within 200 yuan, depending on the location. Deduction of points is an additional penalty and may not always apply. Below is relevant information about reckless lane changing by vehicles: 1. Scope of illegal lane changing: Any motor vehicle changing lanes in sections marked with white straight lines or zebra crossings, or affecting the normal driving of vehicles in that lane when changing lanes, or continuously changing two lanes at once on elevated roads, constitutes illegal lane changing. 2. Legal provisions: According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China" and its implementation regulations, changing lanes improperly on surface roads may result in a fine of up to 30 yuan, and the driver's license may be suspended for up to two months; changing lanes improperly on elevated roads may result in a fine ranging from 50 to 200 yuan, and the driver may also face suspension of their license for one to three months.
12
1
Share

How much windshield washer fluid does the BMW X3 require?

The BMW X3 typically requires approximately 5L of windshield washer fluid for optimal performance. The filling location for the washer fluid is situated on the far left side of the engine compartment. Windshield washer fluid is formulated with various surfactants and anti-corrosion agents. Surfactants generally possess wetting, penetrating, and solubilizing properties, thereby facilitating effective cleaning and dirt removal. The presence of ethanol and ethylene glycol in the fluid significantly lowers the freezing point of the solution, providing anti-freeze protection and enabling rapid frost dissolution. The fluid forms a monomolecular protective layer on the glass surface, which prevents particle adhesion and ensures clear windshield transparency with unobstructed visibility. After cleaning with washer fluid, it eliminates static charges on the glass surface, demonstrating anti-static properties. The ethylene glycol content provides high viscosity, offering lubrication that reduces friction between wiper blades and glass, preventing scratches. The fluid contains multiple corrosion inhibitors that are completely non-corrosive to various metals, vehicle paint, and rubber components, ensuring absolute safety.
7
3
Share

Foshan, Guangdong's Deadline for Ending China 5 Vehicle Registration

Foshan's deadline for ending China 5 vehicle registration was July 1, 2019. According to the Ministry of Ecology and Environment's schedule, the implementation of China 6 standards was originally planned in two phases: Phase 1 aimed to popularize China 6A standards by July 2020, while Phase 2 targeted full adoption of China 6B standards by 2023. Some regions piloted the China 6 standards before July 1, 2019, meaning that China 5 vehicle registration was halted in certain areas starting from that date. Below is the implementation timeline for China 6 standards: 1. Pearl River Delta Region: Foshan, Dongguan, Zhongshan, Huizhou, Zhuhai, Jiangmen, Zhaoqing, Shaoguan, Qingyuan, Yunfu, Heyuan, Shanwei; 2. Yangtze River Delta Region: Hangzhou, Shanghai, Jiangsu, Anhui, Zhejiang; Shanxi: Taiyuan, Jincheng, Changzhi, Yangquan; 3. Chengdu-Chongqing Region: Chengdu, Mianyang, Deyang, Leshan, Neijiang, Zigong, Nanchong, Ziyang, Yibin, Guang'an, Ya'an, Luzhou, Dazhou, Meishan, Suining, Chongqing; 4. Fenwei Plain: Jinzhong, Xi'an, Tongchuan, Linfen, Baoji, Lüliang, Weinan, Yuncheng, Xianyang, Yangling.
5
4
Share

What is the average fuel consumption of the Chevrolet Cruze?

The actual average fuel consumption of the Chevrolet Cruze is 8-10L/100km in urban areas and 7-8L/100km on highways, depending on the specific model and actual road conditions. Here is some information about fuel consumption: 1. Introduction: Generally refers to the amount of gasoline consumed by a car per 100 kilometers, which is a theoretical indicator of the vehicle. 2. Ways to reduce fuel consumption: The longer the idle time, the higher the fuel consumption, so try to minimize idle parking time; avoid rapid acceleration, slamming on the gas pedal, and driving at lower RPMs. 3. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, all have an impact.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.