What are the practical techniques for reverse parking?

What type of gasoline should be used for the Toyota Avalon?

The fuel tank capacity of the Toyota Avalon is 60 liters, and the manufacturer recommends using 92-octane gasoline. For safety reasons, the engine must be turned off before refueling, and the fuel tank cap can be opened by pressing it without locking the car. The refueling process for the Toyota Avalon is as follows: 1. First, press the left side of the fuel tank cap to open it. 2. Unscrew the fuel tank sealing cap. 3. There is a designated placement spot for the fuel tank sealing cap on the fuel tank cover—simply insert it there. 4. At this point, insert the fuel nozzle into the fuel tank. 5. If the fuel pump stops automatically for the first time, it indicates that the tank is full. Do not continue refueling, as this could fill the expansion chamber of the fuel tank with gasoline. 6. Do not remove the fuel nozzle immediately; leave it in the fuel filler neck for 5 seconds to allow any remaining fuel to drain into the tank. 7. Tighten the fuel tank sealing cap by turning it clockwise until you hear a click. 8. To close the fuel tank cap, press the left side firmly until you hear a clicking sound.

18

4

Share

Is the Axela a Three-Cylinder or Four-Cylinder Engine?

The currently available Axela models on the market are all equipped with four-cylinder engines. In terms of power, the Axela offers a choice between a 1.5-liter naturally aspirated engine and a 2.0-liter naturally aspirated engine. More information about the Axela is as follows: 1. The new Mazda 3 continues to use the 1.5L and 2.0L naturally aspirated engines from the current Mazda 3 Axela, with maximum power outputs of 86kW (117PS) and 116kW (158PS) respectively. The former is paired with either a 6MT or 6AT transmission, while the latter exclusively uses a 6AT transmission. 2. Four-cylinder engines offer a balanced performance in terms of fuel economy and smooth power delivery, with relatively low maintenance costs in the long run. Some high-end and performance cars are equipped with six-cylinder, eight-cylinder, or even ten-cylinder engines, which, although more fuel-consuming, deliver exceptionally strong power.

17

3

Share

What is the ground clearance of the Ford Mustang?

Ford Mustang's ground clearance is 147mm, which generally falls within the safe range unless encountering large potholes or rocks. More information about minimum ground clearance is as follows: 1. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the ground when the car is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles like rocks without collision. 2. Generally, the smaller the ground clearance, the lower the ability to overcome obstacles. Therefore, passenger cars usually have relatively small ground clearance as they typically operate on flat urban roads. The design of minimum ground clearance must consider the vehicle's passability during driving, and each model has certain limitations on this value.

2

4

Share

What are the reasons for excessive NOx emissions in cars?

The reasons for excessive NOx emissions in car exhaust are as follows: 1. Vehicle aging. If the vehicle has traveled more than 450,000 kilometers or has been in use for more than 15 years, various components of the car will show significant aging, poor contact, poor sealing, and insufficient pressure. 2. Failure of the three-way catalytic converter. This is the most important external purification device installed in the car's exhaust system, which can convert harmful gases such as CO, HC, and NOx in car exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. 3. Abnormal engine operation. The engine may have issues such as spark plug oil leakage or oil mixing. When the throttle is increased, the engine does not run smoothly and powerfully. 4. Damaged oxygen sensor. In engines using a three-way catalytic converter to reduce exhaust pollution, the oxygen sensor is an essential component. It detects the oxygen concentration in the exhaust and sends feedback signals to the ECU, which then controls the increase or decrease of fuel injection by the injector, thereby keeping the air-fuel ratio of the mixture near the theoretical value and making fuel combustion more efficient.

1

2

Share

What to Do When the Wiper Makes Noise While Wiping the Windshield?

Solutions for wiper noise while wiping the windshield are as follows: 1. Presence of foreign objects on the wiper. When there are foreign objects between the wiper blade and the windshield, it not only causes a squeaking noise during operation but also significantly affects the wiping performance, posing a potential safety hazard. Therefore, after driving through rough road conditions, check the wiper for any foreign objects and clean them promptly. 2. Quality issues with the wiper. Poor-quality wipers often contain rubber components with inadequate durability, which can harden (become rough) under prolonged exposure to sunlight, leading to squeaking noises during operation. Use sandpaper to smooth the blade. 3. Wiper angle. An incorrect angle can cause the wiper blade to bounce on the windshield, resulting in noise. In this case, simply adjust the angle yourself. Avoid applying excessive downward pressure on the wiper, as it can accelerate windshield wear.

18

5

Share

What kind of engine does GAC Trumpchi use?

GAC Trumpchi's engines are independently developed by GAC Group and produced at the group's factory in Panyu. The engine model used in GAC Trumpchi is 4B20J1, with a maximum power of 185 kW, maximum torque of 300 Nm, maximum horsepower of 252Ps, maximum power speed of 5250 rpm, and maximum torque speed range of 1750-4000 rpm. For daily maintenance of GAC Trumpchi's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate out, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

14

2

Share

What are the practical techniques for reverse parking?

What type of gasoline should be used for the Toyota Avalon?

Is the Axela a Three-Cylinder or Four-Cylinder Engine?

What is the ground clearance of the Ford Mustang?

What are the reasons for excessive NOx emissions in cars?

What to Do When the Wiper Makes Noise While Wiping the Windshield?

What kind of engine does GAC Trumpchi use?

What is the best engine oil for Changan Raeton?

What is the method for shifting from first gear to second gear in a manual transmission car?

Is AWD Useful for Climbing Steep Slopes?

Where is the keyhole on the Envision?