What are the point deductions for code 20304?

1 Answers
StOscar
07/29/25 9:27pm
20304 point deductions are for failing to use or incorrectly using turn signals when starting, turning, changing lanes, overtaking, or before stopping. Below is an introduction to Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. 2. Content: The test items for small vehicles C1 and C2 include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. For large vehicles A1, A2, A3, B1, and B2, the test items include pole test, stopping and starting on a slope, parallel parking, crossing a single-plank bridge, curve driving, right-angle turns, passing through a width-limited gate, navigating continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, driving in rain and fog, slippery roads, and emergency handling.
Was this review help?
2
1
Share
More Forum Discussions

What is the wading depth of the CR-V?

The wading depth of the CR-V is 300mm. The wading depth of the CR-V is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, SUVs and off-road vehicles have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake is below the water level when the CR-V is wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct procedures should be followed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in the water, which could lead to severe engine damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not attempt to drive through. Instead, choose an alternative route.
8
2
Share

What to Do When an Automatic Transmission Car Lacks Power Going Uphill?

When an automatic transmission car lacks power going uphill, shift to the L gear. If there is no L gear, switch to manual mode and keep the gear in a lower position. If manual mode is not available, use the S gear for climbing. Climbing requires high torque output combined with power to maintain stable vehicle performance. Reasons for an automatic transmission car lacking power uphill: 1. The engine tachometer rises slowly, primarily reflecting engine power issues; 2. The engine speed increases quickly but the vehicle speed remains slow, directly indicating problems with clutch components. In such cases, it is advisable to visit a 4S shop for professional inspection and repair by qualified technicians.
19
1
Share

What brand are the original tires on the Roewe RX5?

Roewe RX5 uses different tire brands depending on the vehicle model. The high-end models are equipped with Michelin tires, while the mid-range models use Maxxis tires. Both Michelin and Maxxis tires focus on quietness and comfort. The following are the functions of car tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque to ensure good adhesion between the wheels and the road surface, improving the car's power, braking, and passability; work with the car suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
15
5
Share

Why are cars produced in 2018 called 2019 models?

Cars launched in 2018 are called 2019 models because manufacturers sometimes release new models in the previous year. Generally, vehicles produced after October 2018 are designated as 2019 models. The production date of a car can be referenced through its Vehicle Identification Number (VIN). Below are the specific details about the VIN: 1. First 3 characters: Represent the country of production, manufacturer, and vehicle type. 2. Characters 4—8: Indicate vehicle characteristics, such as vehicle category, body type, engine type, and gross vehicle weight rating. 3. The 9th character: Represents a check digit used to verify the accuracy of the VIN. 4. The 10th character: Indicates the production year, proving when the vehicle was manufactured. 5. The 11th character: Shows the assembly location, with '0' indicating original factory assembly. 6. Characters 12—17: Represent the production serial number, used for recalls by manufacturers for quality issues.
6
2
Share

Can Cooking Oil Be Stored in the Car Trunk During Summer?

Can cooking oil be stored in the car trunk during summer? The following items should not be placed in the trunk: 1. Overly heavy items: Due to the continuous evolution of car design, many drivers tend to store excessively heavy items in the trunk for long periods or during transportation. This practice is highly detrimental to the vehicle's operation. Heavy items can inadvertently increase fuel consumption, leading to unnecessary waste. Additionally, the shift in the car's center of gravity can negatively impact its stable performance. 2. Flammable or explosive materials: Given the enclosed nature of a car trunk and the hot summer weather, the trunk often reaches high temperatures, which poses significant risks for flammable or explosive items. An explosion in the trunk could damage the car body and, in severe cases, even cause the vehicle to catch fire, endangering the driver's safety. 3. Perishable food items: The enclosed environment of the trunk accelerates the spoilage of food stored for extended periods, resulting in waste. Moreover, the resulting odors can severely affect the trunk's condition, and eliminating these odors may incur additional costs, leading to an unpleasant driving experience.
1
2
Share

What are the procedures for purchasing parallel imported vehicles?

Purchasing a parallel imported vehicle requires customs clearance documents, the vehicle inspection report, and 3C certification. Below are the specific advantages of parallel imported vehicles: 1. Price Advantage: Parallel imported vehicles eliminate many intermediate steps. Moreover, parallel import dealers are not restricted by manufacturers in pricing, offering greater flexibility, which results in significant price discounts. Typically, parallel imported vehicles are 10%~20% cheaper than their China-spec counterparts. 2. Model and Delivery Time Advantage: When new vehicles are launched overseas, they may not be immediately available in China due to manufacturers' strategic planning or domestic certification processes. However, parallel imported vehicles can be freely sourced from overseas and shipped to China for sale, significantly reducing the waiting time for new models. 3. More Diverse Configurations: Buyers can access overseas models not available in China. To align with the Chinese market positioning strategy, manufacturers often make certain adjustments or modifications when importing overseas models into China.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.