···
Log in / Register

What are the physical requirements for obtaining a C1 driver's license?

3 Answers
LaAnthony
07/29/25 9:03am
Physical requirements for obtaining a C1 driver's license are as follows: 1. Height requirement: Height must be at least 150 centimeters. 2. Vision requirement: For individuals with monocular vision impairment, naked or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart, and horizontal field of vision must reach 150 degrees. Such individuals may apply for small cars and small automatic transmission vehicles. 3. Color discrimination ability: No red-green color blindness. 4. Hearing requirement: Must be able to distinguish the direction of sound sources with each ear at 50 centimeters from a tuning fork. Individuals with hearing impairments who can meet the above requirements with hearing aids may apply for motor vehicle driver's licenses for small cars and small automatic transmission vehicles. 5. Upper limb requirement: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal limb and finger movement functions. However, individuals with missing finger tips or those with three intact fingers on the left hand and complete palms on both hands may apply for motor vehicle driver's licenses for small cars, small automatic transmission vehicles, low-speed trucks, and three-wheeled vehicles. 6. Lower limb requirement: Both lower limbs must be intact with normal movement functions, and the length difference must not exceed 5 centimeters. However, individuals with missing left lower limbs or loss of movement function may apply for motor vehicle driver's licenses for small automatic transmission vehicles.
Was this review help?
15
4
Share
PiperFitz
08/12/25 8:10am
I remember the physical requirements for a C1 driver's license are quite basic, mainly handled through a medical check-up. You need to ensure your vision is at least 4.9, whether with glasses or without, but color blindness or color weakness is not allowed—especially red-green color blindness, as it would make traffic signals unreadable. Hearing is also important; both ears must be able to distinguish the direction of sound from 50 cm away. If you're hard of hearing, it could affect your alertness while driving. Your hands and feet must be flexible too—both thumbs must be intact, and each hand must have at least three fully functional fingers. Your lower limbs must be normal to operate the pedals, or emergency braking could become problematic. Additionally, you can't have major illnesses like epilepsy or heart disease to avoid potential dangers. During my medical check-up, these were the main points examined. The check-up is done at a driver's license medical center or designated hospital—just bring your ID card and go. Make sure to get enough sleep beforehand and stay relaxed to avoid delaying your driving test progress.
Was this review help?
5
4
Share
Expand All
Clayton
10/06/25 3:24am
I'm quite familiar with the physical requirements for obtaining a C1 driver's license, as I just took the test last year. Your vision must be at least 4.9 - I had my eyesight checked during the medical exam, and also passed the color blindness test where you identify red and green from colored dots. If you fail, you'll have to apply for a different type of license. Hearing is also crucial - the doctor whispered in my ear and I had to identify the direction. Your arms and legs need normal mobility - my friend couldn't qualify because he's missing a finger, but fortunately I met all the requirements. Regarding medical conditions, if you frequently experience fainting or have high blood pressure, it's best to get those under control first. The entire medical exam is very quick, taking only about 15 minutes, and costs just a few dozen yuan. I recommend practicing your vision or getting your ears checked in advance to avoid minor issues that could delay your driving lessons.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

How to align the camshaft on a Cruze?

There is a groove at the rear of the Chevrolet Cruze camshaft. Simply rotate the crankshaft two turns to align the marks. Below is an introduction to automotive camshafts: The camshaft is a component in a piston engine. Due to its high rotational speed and the need to withstand significant torque, the design requirements for the camshaft in terms of strength and support are very high. The material is typically high-quality alloy steel or alloy steel. There are three key points to note regarding camshaft usage: 1. Insufficient oil supply pressure from the oil pump, blocked lubrication channels preventing oil from reaching the camshaft, or excessive tightening torque on the bearing cap bolts preventing oil from entering the camshaft clearance can all lead to abnormal wear of the camshaft. 2. Abnormal wear of the camshaft can increase the clearance between the camshaft and the bearing seat, causing axial displacement during camshaft operation and resulting in unusual noises. 3. When installing the bearing cap, pay attention to the directional arrows and position numbers marked on the bearing cap surface, and strictly follow the specified torque using a torque wrench to tighten the bearing cap bolts.
20
4
Share

How to Adjust the Headlight Height of Hyundai Elantra?

The method to adjust the headlight height of the Elantra is as follows: Locate the knob on the left side of the dashboard near the air vent and adjust it accordingly. Here are the details about headlight height adjustment: 1. Headlight height adjustment refers to optimizing the illumination distance by adjusting the headlight height to prevent potential hazards. This is a safety feature that uses an electric motor to adjust the headlight height. 2. The headlight height adjustment knob is located on the left side of the dashboard, next to the light control switch. 3. The knob has numbers from 0 to 3, where a higher number indicates a lower height. Adjust it to the 0 position. 4. The 0 position is the default setting, representing the horizontal height, suitable for when the front seats are occupied and the trunk is empty. Positions 1-3 are suitable for when the vehicle is fully loaded with passengers and luggage.
18
2
Share

Where is the air filter of Baojun 730 located?

The air filter of Baojun 730 is located behind the glove box on the passenger side. To replace it, you need to remove the glove box, inside which there is a removable black panel. The air filter is behind this panel. After removing it, you can clean or replace the filter yourself. Below are the functions of the air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air. 4. It prevents the car windows from fogging up, ensuring clear visibility for drivers and passengers and safe driving. 5. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; it also effectively sterilizes and deodorizes. 6. It maintains clean air in the cabin, preventing bacterial growth and creating a healthy environment.
2
5
Share

How to Open the Trunk of a Honda Accord?

The trunk can be opened by pressing the button on the driver's door panel, allowing you to open the trunk for your family without getting out of the car. To close the trunk, simply pull the switch on the tailgate, which is easy to operate and keeps your hands clean. The car key also features a trunk release button; pressing this button outside the car will unlock the trunk. Below is some information about the Honda Accord: 1. The all-new interior design fully showcases a high-end and stylish tone. The dashboard is innovatively divided into an upper information area and a lower control area, making the design more ergonomic. 2. The 8-inch embedded color LCD screen includes features such as GPS navigation and an onboard computer. These functions can be easily and intuitively operated via one-touch multifunctional buttons, offering a better human-machine interface compared to similar systems in European luxury cars, ensuring active driving safety.
5
3
Share

How many liters of transmission oil should be added to the Emgrand GS?

Emgrand GS transmission oil should be added 4 liters. The following is the information about Emgrand GS: 1. In terms of configuration, Emgrand GS comes standard with electric adjustable rearview mirrors, rearview mirror heating, daytime running lights, automatic headlights and other configurations. 2. The interior of Emgrand GS adopts Geely's latest family-style design language, and also comes standard with a multifunctional steering wheel, automatic air conditioning, reverse radar and other configurations. 3. In terms of space, one fist of headroom and two fists of legroom are at a good level among models of the same class. Although the 1.3T and 1.8L engines of Emgrand GS are not particularly outstanding among models of the same class, they are equipped with a 6-speed dual-clutch transmission.
10
0
Share

How to Change Transmission Oil for Magotan?

Here are the steps to change transmission oil for Magotan: 1. First add transmission cleaner into the gearbox to decompose the oil film on gears as much as possible, then lift the vehicle. 2. Shift between D and R gears, and drive for 5-10 minutes. 3. After these two steps, the automatic transmission will be cleaned, so now drain the old oil. Here is some information about transmission: 1. Unlike engine oil change, automatic transmission fluid replacement requires specialized equipment to completely remove old lubricant and other residues. 2. 49% of automatic transmission fluid cannot be drained by atmospheric pressure, and the remaining oil will mix with sludge and impurities in valve body, torque converter and cooling lines, which may cause internal passage blockage if not thoroughly cleaned.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.