What are the physical examination items for the C1 driver's license test?

1 Answers
StGrant
07/29/25 8:47pm
C1 driver's license physical examination items include height: must be at least 150 cm; vision: naked or corrected vision in both eyes must reach 4.9 or above on the logarithmic visual acuity chart; color discrimination: no red-green color blindness; hearing: ability to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork; upper limbs: both thumbs must be sound, and each hand must have at least three other sound fingers with normal limb and finger movement functions; lower limbs: normal movement function; trunk and neck: no movement dysfunction. Vehicle types permitted with C1 license: The C1 driver's license allows driving small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special operation vehicles; small passenger vehicles with seating capacity of 9 or fewer. C1 driver's license does not permit driving: large buses, tractor units, city buses, medium buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and tramcars. Additionally, the C1 license does not allow driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
Was this review help?
19
0
Share
More Forum Discussions

How to Clean Dirty Fabric Seats?

Fabric seats can be cleaned using the following methods: 1. Surface Cleaning: For small stains, spray a small amount of foam cleaner onto the fabric for about 10 seconds, then wipe with a clean, soft cloth. Avoid using stain removers as they may cause discoloration and marks. 2. Dirt Cleaning: For dry dirt like dust or sand, simply pat it off or use a vacuum cleaner. For granular sand, use a soft brush to gently brush inward, but avoid hard brushes to prevent fabric damage. For spills like drinks or juice, first blot the moisture with a paper towel, then wipe with warm water mixed with mild detergent, and finally dry with a clean soft cloth and low-temperature drying. 3. Maintenance: Regular maintenance involves wiping with a clean, soft cloth. For long-term stains, the ideal method is to first wipe with warm water diluted with mild detergent, then remove the cleaning solution with a damp cloth, and finally polish with a dry cloth. Once completely dry, apply an appropriate amount of leather conditioner evenly for protection.
17
2
Share

What is the proper air pressure for painting?

Painting normally requires an air pressure of 0.3~0.6Mpa. Painting: Paint is a type of synthetic lacquer made from nitrocellulose, resins, pigments, solvents, etc. It is typically applied evenly onto surfaces using a spray gun, offering water resistance, oil resistance, and quick drying. It is used for painting cars, airplanes, wooden objects, leather, etc. This substance is toxic and can have certain effects on the body. The toxicity varies depending on the brand due to differences in ingredient composition. Special care should be taken during use to avoid inhalation and skin contact. Air pressure spraying method: Air pressure spraying is a type of spraying technique. It involves atomizing the paint with compressed air and spraying it onto the surface of the substrate (plastic or other materials) through a nozzle. This method is suitable for coating porous materials and substrates that should not be saturated. Air pressure spraying is further divided into suction-type spraying and pressurized air spraying.
8
3
Share

How to use the navigation system in Haval H6?

Haval H6 navigation usage method: Enter the navigation interface on the central console, select the province and city (county) of the destination, then input the destination name and press confirm. On the left side of the screen, prompts such as starting point and destination will appear, simply click the destination. When selecting the destination, note that there are three options: recommended, distance, and highway. Choose according to your situation, and the navigation will automatically plan the route and begin navigation. The Haval H6 is the flagship model of the Haval brand, with body dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm. In terms of appearance, the Haval H6 features dynamic micro-curves outlining the side profile, creating a sharp and ready-to-go stance. The LED intelligent headlights and wrapped wheel arch design add a cool and sporty touch, pursuing technology and futuristic feel while maintaining a balance between grandeur and stability.
11
0
Share

Will a car lose acceleration power when it gets too hot?

Yes, a car that has become overheated can experience a loss in acceleration power. Here are the relevant explanations: 1. Ignition system failure: Aging ignition coils or spark plugs that haven't been replaced for a long time can lead to insufficient ignition energy and poor combustion. This results in weak engine acceleration and the illumination of the engine fault light; low pressure caused by fuel system malfunctions can also contribute. 2. Excessive engine carbon buildup: This can impair fuel atomization, leading to poor combustion of the air-fuel mixture, excessive exhaust emissions, and weakened engine acceleration. 3. Engine system malfunctions: These can cause the engine to enter an emergency operating mode, thereby limiting power output and resulting in poor acceleration. Examples include failures in engine sensors such as oxygen sensors, air flow meters, crankshaft position sensors, knock sensors, etc. Signal faults from these sensors can trigger the engine's emergency operation mode, slowing down acceleration.
3
5
Share

How to sense the position of the wheels?

Use the steering wheel as a reference for observation. Here are the specific methods to sense the position of the wheels: 1. Sensing the left wheel position: When driving on a road with marked lines, use the steering wheel as a reference. Observe the leftmost edge of the steering wheel, then look straight ahead. As the edge line extends forward and aligns with the road's edge line, a perpendicular tangent line to the steering wheel's edge will pass exactly over the left tire. This helps determine the correct position of the wheel. 2. Sensing the right wheel position: Similarly, using the steering wheel as a reference, when you see the rightmost edge of the steering wheel, look outward an additional 10 centimeters. This creates a line extending to the right front, and the extension of this line indicates the correct position of the right front wheel. Of course, it's undeniable that different sitting postures may result in slight variations.
3
3
Share

Why Can't I Find Information After Accumulating 12 Points?

If you can't find information after accumulating 12 points, it's because the violation information has not yet been uploaded to the computer network. Attend Study Session: Motor vehicle drivers must, within fifteen days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security organ where the driver's license was issued or where the violation occurred. Take the Exam: After attending the study session, the vehicle management office must administer a road traffic safety laws, regulations, and related knowledge exam within twenty days. Pass the Exam to Clear Points: Those who pass the exam will have their points cleared and their driver's license returned. Those who fail will continue to attend study sessions and retake the exam. Those who refuse to attend the study session or take the exam will have their driver's license suspended by the traffic management department of the public security organ.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.