···
Log in / Register

What are the physical examination items for driver's license renewal?

4 Answers
DelLevi
07/29/25 7:52pm
The main items for driver's license renewal are as follows: 1. Height: Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. For applicants of large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams, the naked or corrected visual acuity of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle types, the naked or corrected visual acuity of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 3. Color vision: No red-green color blindness. 4. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from the fork. 5. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions. 6. Lower limbs: Normal movement function. For applicants of manual transmission vehicles, the length difference between the lower limbs should not exceed 5 cm. For automatic transmission vehicles, the right lower limb must be intact. 7. Trunk and neck: No movement dysfunction.
Was this review help?
4
1
Share
Norman
08/14/25 3:34pm
I've experienced the physical examination for driver's license renewal, which mainly includes four parts: vision test, color discrimination test, hearing test, and limb mobility assessment. For the vision test, you need to read an eye chart while wearing glasses or contact lenses, with the goal of achieving corrected visual acuity of 0.8 or above in both eyes to ensure clear visibility of road signs and pedestrians. The color discrimination test involves identifying colored pictures or cards to check for color blindness or red-green weakness, which is crucial as drivers need to recognize traffic lights. The hearing test typically requires you to hear normal speech from a doctor standing behind you, confirming your ability to notice horn sounds. The limb mobility part involves performing simple actions like bending fingers or moving ankles to ensure flexible and safe operation of the steering wheel and pedals. The entire process takes about 20 minutes at a hospital or designated DMV location. Bring your ID and old driver's license to save time in line. The cost is low, around 30-40 yuan, and the medical report is valid for 6 months—just submit it directly when renewing your license; don't worry about complexity. These tests are designed to ensure road safety, as poor vision or color blindness can easily lead to accidents. I'd just remind everyone to get enough rest beforehand and avoid staying up late, which could affect the results. If you have vision issues, wearing glasses for a recheck is simple.
Was this review help?
1
0
Share
Expand All
DelMicah
10/15/25 7:53am
I have a clear understanding of the driving safety physical examination items: The vision test is to meet the corrected visual acuity standard of 0.8, ensuring you can see distant objects and details clearly while driving to avoid accidents. The color vision test is crucial for accurately identifying traffic signals like red and green lights—any mistake here could lead to traffic chaos. The hearing test requires you to respond to normal-volume conversations, proving you can detect emergency sounds such as sirens. The limb mobility check assesses the flexibility of your wrists and ankles, confirming smooth operation of turn signals and the accelerator. The logic behind these tests is to eliminate driving risks, as conditions like color blindness or hearing issues could cause you to miss signals and lead to accidents. I recommend bringing a copy of your ID when visiting designated institutions for the exam, which costs just a few dozen yuan, and the report remains valid for six months. If you fail a test, such as the vision check, don’t lose heart—just retake it with glasses. Regular physical activity and eye checkups, along with a healthy lifestyle, can also help you pass in one go. The entire process is quick and convenient, but going during off-peak hours can save time. Ensure you pass the exam to renew your license with peace of mind—safety comes first on the road.
Was this review help?
17
5
Share
Expand All
LeJace
11/28/25 8:44am
When renewing my driver's license, the required medical tests were simple yet essential: a vision check ensuring at least 0.8 corrected visual acuity; a color blindness test excluding red-green color weakness; a hearing test confirming clear comprehension at normal speech pace; and limb mobility verification for proper driving control. These checks take about 20 minutes at hospitals or DMVs—bring ID to save time. The affordable report remains valid for six months, ensuring safe license renewal. Don't worry, it's an easy pass.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What are the hassles of registering a vehicle in a different location?

If you plan to transfer the vehicle to your local area in the future, it might not be possible due to factors like emission standards or vehicle age. Additionally, when purchasing a car from another location, most 4S dealerships do not offer free first maintenance. Registering the vehicle in a different location can also cause issues with annual inspections, as you would need to return to the place of registration for the inspection. Some local free benefits may also be unavailable. Below are specific inconveniences of having an out-of-town license plate: 1. Lost license plate: If your vehicle license or plate is lost, you can only apply for a replacement at the vehicle's registered location. Driving without a license plate is prohibited, and doing so could result in penalties like a 12-point deduction, so you must promptly go to the registered location for a replacement. 2. Annual inspection: Although policies support cross-region annual inspections, the procedures, required documents, and rules vary by location. 3. Traffic restrictions: Large cities with high populations often impose travel restrictions on vehicles with out-of-town plates. For example, in Beijing, vehicles with non-local plates cannot enter within the 5th Ring Road during rush hours, and in Tianjin, non-local vehicles are barred from entering the inner ring road.
1
3
Share

Where is the car's oil filter located?

The car's oil filter is located at the bottom of the engine. Also known as the oil element, it is used to remove impurities such as dust, metal particles, carbon deposits, and soot particles from the engine oil to protect the engine. Oil filters are categorized by working principle into: 1. Full-flow filters: Connected in series between the oil pump and the main oil passage, they filter all the lubricating oil entering the main oil passage; 2. Bypass filters: Connected in parallel with the main oil passage, they filter a portion of the lubricating oil pumped by the oil pump. Requirements for oil filters in cars: 1. The oil flow rate must meet the engine's oil demand; 2. The filtration precision must remove particles larger than 30 microns; 3. They must be able to withstand high oil temperatures and corrosive environments.
10
1
Share

What Causes Spot Paint Peeling on the Hood?

It is due to poor paintwork. It could be a localized color difference defect in the paint surface that existed when the vehicle left the factory, caused by uneven paint spraying. The spots, covered by the glossy enamel paint, generally cannot be removed and do not have a significant impact, nor will they expand on their own. Below is an introduction to the functions of automotive paint: 1. Protective Role: As an outdoor means of transportation, cars are constantly exposed to various corrosive agents in the atmosphere, such as humidity, oxygen, industrial atmosphere, sulfur dioxide, carbon dioxide, and nitrogen dioxide. Automotive paint forms a firmly adhered continuous film on the car, preventing chemical or electrochemical reactions between the surface and surrounding media, thereby stopping or delaying the occurrence and development of damage to the vehicle. 2. Decorative Role: Coating the car surface with various bright and colorful paints makes it look beautiful, lively, and pleasant, giving people an aesthetic feeling and showcasing the vehicle's personality. A full-bodied paint film can also enhance the car's grade. 3. Identification Role: The color of automotive paint can serve as a mark for the type and function of the vehicle, such as green for postal vehicles and white for ambulances. Other Functions: Some automotive coatings can improve comfort and sealing, preventing noise caused by vibrations.
8
1
Share

What Causes Oil Stains on the Hood?

Oil stains on the hood and engine are generally normal, but if it's due to an oil leak, then it's abnormal. Causes of oil traces around the engine include: a poorly sealed fuel cap, possibly due to aging or damaged seals leading to oil leaks or seepage; or oil spilled around the filler neck during oil changes that wasn't thoroughly cleaned. Below is additional information about the hood: 1. Types: Front-engine hood, mid-engine hood, rear-engine hood. 2. Functions: (1) Airflow guidance: The hood's shape effectively adjusts the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the vehicle. By guiding the airflow, air resistance can be broken down into beneficial forces, increasing the front tires' grip on the road, which enhances driving stability. (2) Protection for the engine and surrounding components: By improving the hood's strength and structure, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle's normal operation. (3) Aesthetics: The vehicle's exterior design is a direct reflection of its value. As a crucial part of the overall appearance, the hood plays a vital role in visual appeal, embodying the concept of the entire car.
17
3
Share

What are the disadvantages of renewing a driver's license in a different location?

There are no disadvantages. Motor vehicle drivers should apply for license renewal at the vehicle management office of the original issuing location or any other location within 90 days before the expiration of their current driver's license. To renew the new version of the driver's license, citizens need to bring two copies of their ID card, two recent 1-inch color passport photos without hats, the original ID card, the original driver's license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office). The required documents for renewing a motor vehicle driver's license upon expiration are as follows: 1. Documents: "Motor Vehicle Driver's License Application Form," which must be signed by the applicant; the original driver's license and the applicant's relevant documents; the identity proof of the motor vehicle driver (original and copy); if the applicant cannot be present, a jointly signed application form by the applicant and the agent, along with the identity proofs of both (original and copy), must be submitted. 2. Medical proof: A medical condition certificate issued by a county-level or above medical institution or a military medical institution at the regimental level or above. For applicants applying to drive small automatic passenger vehicles for the disabled, a medical condition certificate issued by a specialized medical institution designated by the provincial health authority must be submitted. 3. Photos: Three photos of the motor vehicle driver, which must be straight-edged, front-facing, color passport photos without hats, taken within six months before the driver's license business processing, with a white background and no uniform clothing.
6
1
Share

What are the symptoms of a faulty EGR valve?

egr valve failure symptoms are: 1. Difficulty starting the engine, weak acceleration; 2. Failing emission tests; 3. Black smoke from the exhaust pipe; 4. Unstable idle or stalling at idle; 5. Check engine light flashing; 6. Engine oil burning; 7. Increased fuel consumption. Causes of EGR valve damage: 1. Quality issues with the exhaust gas recirculation system itself; 2. Improper maintenance; 3. Fuel quality problems; 4. Aging of the waste valve. The function of the EGR valve is to appropriately reduce fuel consumption, improve engine efficiency, lower exhaust temperature, and reduce the formation of nitrogen oxide compounds and carbon monoxide.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.