What are the physical examination items for driver's license renewal?

2 Answers
Reagan
07/24/25 6:15am
The physical examination items for driver's license renewal include: height, vision, color discrimination, hearing, upper limbs, lower limbs, torso, and neck. Applicants for a motor vehicle driver's license must comply with Article 12 of the Regulations on the Application and Use of Motor Vehicle Driver's Licenses: apply for renewal at the vehicle management office of the issuing authority of the motor vehicle driver's license within 90 days before the expiration of the driver's license. The required materials and renewal process for driver's license renewal upon expiration are: 1. Within 90 days before the expiration of the driver's license, obtain or download and fill out the motor vehicle driver's license application form at the local vehicle management department; 2. For renewal due to expiration or reaching the specified age, fill out the motor vehicle driver's physical condition certificate; 3. Undergo a physical examination at designated renewal points or medical institutions at or above the county level.
Was this review help?
10
3
Share
Toby
08/11/25 2:01am
Last year, I renewed my driver's license, and the medical examination involved quite a few tests. The doctor first checked my vision using the E-chart, asking me to identify the direction of the letters to ensure I don't have nearsightedness that could impair road visibility. Next was the color vision test, where I was shown several color cards and asked to name the colors, mainly to check for color blindness that might affect traffic light recognition. Then came the hearing test—the doctor whispered words for me to repeat, ensuring I can hear car horns clearly while driving. Physical coordination was also important; the doctor had me rotate my neck and raise my arms to assess mobility and flexibility, along with a brief medical history review to rule out conditions like epilepsy. The whole process took less than half an hour and was affordable, but it had to be done at designated hospitals or traffic management centers. These tests are legally required to ensure safe driving, so don’t complain about the hassle—it’s only once every ten years. Just get enough rest beforehand to avoid any hiccups.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Where is the cabin air filter of Zotye SR7 located?

Zotye SR7's cabin air filter is located in the glove compartment area. Release the side clips and lower the glove compartment to reveal the cabin air filter cover. For typical urban family cars, it's recommended to replace the cabin air filter every six months or once a year. Consider replacing the cabin air filter under the following circumstances: 1. If the airflow from the AC vents significantly decreases, the cabin air filter might be clogged. First clean the filter, or replace it if necessary. 2. The cleaning frequency depends on road conditions (dusty roads, etc.), and earlier cleaning is recommended. 3. The cabin air filter should be properly installed in its position. Using the AC without the cabin air filter may degrade dustproof performance and affect AC performance.
18
4
Share

Does the Alphard have a hybrid version?

The Alphard does have a hybrid version, which adopts an oil-electric hybrid powertrain. The Alphard is a luxury MPV under Toyota, and the new model is equipped with a hybrid powertrain consisting of a 2.5-liter naturally aspirated four-cylinder engine and two electric motors. Details about the hybrid version of the Alphard are as follows: 1. All currently available hybrid models of the Alphard feature a front-engine, four-wheel-drive layout, with the four-wheel-drive system being an electric four-wheel-drive. 2. The dimensions of the hybrid Alphard models are 4975mm in length, 1850mm in width, and 1890mm in height, with a wheelbase of 3000mm. 3. The Alphard uses a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear.
18
0
Share

What type of tires does the BYD Surui use?

The tire model for the BYD Surui is 205/55R16. 205 indicates the tire width is 205 millimeters; 55 represents the tire's aspect ratio, meaning the ratio of the sidewall height to the tire width is 55%; R stands for radial tire; and 16 denotes the rim diameter is 16 inches. Relevant information about tires is as follows: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground contact and rolling. 2. Tires are typically composed of three parts: the outer tire, inner tube, and bead. 3. Tires not only bear loads and roll but also generate friction with the road surface through their tread blocks, serving as the power source for vehicle driving, braking, and steering.
15
0
Share

Where is the steering angle sensor located on an Audi A4?

The steering angle sensor is located under the steering wheel. You can see it after removing the driver's airbag and taking off the steering wheel. More information about the steering angle sensor is as follows: 1. The steering angle sensor in a car is used to detect the rotation angle and direction of the steering wheel. Whether the steering wheel turns left or right, it will be detected by the steering angle sensor, enabling the car's electronic control unit to issue the correct steering commands. The rotation angle of the steering wheel provides the basis for the car to achieve the desired steering amplitude, allowing the car to move according to the driver's steering intentions. 2. The steering angle sensor consists of components such as a photoelectric coupling element and a perforated slot plate. The photoelectric coupling element includes a light-emitting diode and a phototransistor. The perforated slot plate is placed between the light-emitting diode and the phototransistor. The perforated slot plate has many small holes. When the steering wheel is turned, the perforated slot plate rotates accordingly. The phototransistor operates based on the light passing through the perforated slot plate and outputs a digital pulse signal. The car's electronic control unit uses this signal to identify the steering angle, direction of rotation, and rotation speed of the steering wheel.
17
1
Share

Can the BMW X3 Use 92 Octane Gasoline?

The minimum fuel grade for the BMW X3 is 95 octane, and it cannot use 92 octane gasoline. Different types of vehicles use different engines, and the fuel grade specified for the engine will also vary. More information about fuel is as follows: 1. The reason fuel has different grades is because it serves different purposes. In daily life, household cars generally use 92 or 95 octane gasoline. Although fuel is graded, there is no difference in quality between these two types of fuel; they simply contain different components. 2. 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane gasoline consists of 95% isooctane and 5% n-heptane. The proportions of isooctane and n-heptane in these two fuel grades differ, and the higher the purity of isooctane, the stronger the fuel's anti-knock properties. 3. If fuel that does not meet the engine's specified grade is used during operation, knocking may occur. This is caused by incomplete combustion of the fuel in the engine, which not only increases fuel consumption but also reduces engine power. 4. The vehicle's fuel grade can be found on the back of the fuel filler cap. Always use the specified fuel grade when refueling.
11
0
Share

How to reset the tire pressure light on Volkswagen Magotan?

Methods to reset the tire pressure light on Volkswagen Magotan: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It then sends the pressure information from inside the tire to a central receiver module via a wireless transmitter, displaying the tire pressure data for each tire. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of the above two systems, equipping direct sensors in two diagonally opposite tires and incorporating a 4-wheel indirect system.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.