···
Log in / Register

What are the photo requirements for submitting the Subject 4 exam?

3 Answers
SanTheo
07/29/25 1:16am
The photo required for submitting the Subject 4 exam should be a one-inch bareheaded photo with a pure red or blue background. Below is relevant information about the Subject 4 exam: 1. Required documents: Items needed for the Subject 4 exam include ID card, student permit, exam files, etc. Some locations may also require photos for the driver's license. Usually, if the driving school handles the Subject 4 exam registration, you only need to bring your ID card. Before the driving school organizes a group trip to the DMV for the exam, they will provide the student permit and files to the students. 2. Exam scope: Depending on the type of driver's license being tested, 50 questions will be randomly selected from the corresponding Subject 4 exam question bank. For car licenses, questions are selected from 1235 questions, and for large vehicle licenses, questions are also selected from 1235 questions. Each question is worth 2 points.
Was this review help?
12
1
Share
OChase
08/12/25 11:03am
I just finished the subject four exam and remember that photo requirements are particularly important. You need a one-inch photo without a hat, with a background that must be pure blue or white, which is the most standard. The photo must be a front-facing shot, clearly showing your face, ears, and eyebrows, with a natural expression—not too exaggerated—and no hats or large sunglasses unless they are necessary medical glasses. The photo should be recent, preferably taken within the last three months, to ensure no significant changes in facial features. When taking the photo, go to a good photo studio and specify it's for a driver's license test. When uploading, the file size should be correct, in JPG format, and not too large to exceed the system limit. If the photo is not qualified, the registration may not pass, delaying the exam time. During the subject four exam, this photo is used on the admission ticket for the examiner to verify your identity. Any mistake could lead to unnecessary trouble. After passing, the photo will be directly printed on your driver's license, so take some effort to get a good one to avoid regrets. Driver's license safety comes first, and these details cannot be taken lightly.
Was this review help?
4
3
Share
Expand All
Barry
10/02/25 2:10am
As someone who has gone through the driver's license test, the photo standards must emphasize a bareheaded one-inch color photo with a plain blue or white background preferred. Face the camera directly without turning sideways, ensuring even and clear facial lighting without blurriness, and avoid wearing any accessories or hats while maintaining a neat and calm expression. The photo must be taken within the last six months with high recognizability, and when uploading, the dimensions should match the system requirements as a JPG file of appropriate size. If the photo is not up to standard, the application may get stuck, requiring additional effort. The core purpose of the photo is for identity verification during the exam to ensure security and prevent cheating—I've seen cases where people had to retake photos due to blurriness, affecting the overall progress. It's advisable to visit a professional photo studio in advance and specify the purpose for the driver's license; they understand the standards. Once the license is obtained, the photo will be used throughout, so paying attention to these details ensures a smooth process.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

Is Audi Original Glass Better or Coated Glass Better?

Choosing coated glass is better. Coated glass offers many color options for the coating, and since the glass coating is applied to the 2nd and 3rd surfaces of the insulated glass, it ensures excellent durability of the coating. Additionally, selecting low-e coated glass can effectively prevent UV damage and more. Introduction to Coated Glass: Coated glass (Coated glass) is also known as reflective glass. Coated glass involves applying one or more layers of metal, alloy, or metal compound films on the glass surface to alter its optical properties and meet specific requirements. Depending on the product's characteristics, coated glass can be categorized into the following types: heat-reflective glass, low-emissivity glass (Low-E), conductive film glass, etc. Production Methods of Coated Glass: There are many production methods for coated glass, mainly including vacuum magnetron sputtering, vacuum evaporation, chemical vapor deposition, and sol-gel methods. Magnetron sputtering coated glass utilizes magnetron sputtering technology to design and manufacture complex multi-layer film systems, allowing for a variety of colors on white glass substrates. The film layers exhibit good corrosion resistance and wear resistance, making it one of the most widely produced and used products currently.
19
0
Share

What is the fuel consumption of the new Bora?

According to the test by the Ministry of Industry and Information Technology, the comprehensive fuel consumption of the new Bora 1.6L is around 6.8 to 7.2, while the 1.4T model is around 6.6. Introduction to fuel consumption: Fuel consumption (Constant-Speed Fuel Economy): Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. Comprehensive fuel consumption: Comprehensive fuel consumption is tested under different conditions such as urban roads, highways, and varying loads. It is only a reference, and the actual fuel consumption may be higher or lower than this number. For example, driving daily in busy city areas, frequently braking and accelerating, can lead to higher fuel consumption, even reaching 10 liters per 100 kilometers, which is quite normal.
1
1
Share

Which one is the low beam headlight on the Baojun 560?

The low beam headlight on the Baojun 560 is controlled by a lever on the left side of the steering wheel. Above the turn signal indicator, there is a symbol for the low beam headlight. Twist it twice to turn on the low beam. Introduction to low beam headlights: Low beam headlights are designed for close-range illumination. Their design requirements include a wide coverage angle (160 degrees) and a short illumination distance, with non-adjustable focus. Illumination range of low beam headlights: The low beam headlights illuminate approximately 30-40 meters ahead. According to experiments, when driving at 55 km/h at night, the braking distance after noticing an obstacle is exactly 30 meters. This means that if you spot an obstacle within the low beam's range and brake immediately, there will be no gap between the car and the obstacle. Of course, this is under ideal conditions with good vehicle and road conditions and a quick driver reaction. If the speed is higher, or if the vehicle or road conditions are poor, or the driver is fatigued with slower reactions, the outcome can be imagined. Therefore, it is essential to control your speed when driving at night. On flat, wide, and well-lit roads, you can use high beams and drive slightly faster. However, when encountering oncoming traffic, uneven roads, turns, bridges, narrow roads, or intersections, you should slow down, generally keeping the speed below 40 km/h.
10
0
Share

What is the chassis code of the new Fit?

2021 Fit is the fourth generation Fit, and the chassis code of this model is GR9. The chassis code is commonly known as the frame number, similar to a person's ID number. The frame number is the ID number of that car. Normal frame number locations: Except for trailers and motorcycles, on the door hinge pillar, door lock pillar, or one of the pillars connected to the door lock pillar, near the driver's seat; fixed on the left side of the dashboard; fixed on the inner side of the door, near the driver's seat. It should be in a place where it can be easily read without moving any parts of the vehicle except for the outer door. The VIN code of most domestic cars can be found on the left side of the dashboard or below the windshield. Importance of the frame number: The frame number is like a person's fingerprint. If the steel plate with the frame number is damaged, the owner must not cut the steel plate with the frame number by themselves. The damaged condition of the vehicle must be preserved, and the car should be driven directly to the vehicle management department for certification to prove that the steel plate with the frame number is indeed damaged. Then, the vehicle management department will handle the situation according to the actual circumstances.
16
2
Share

What is the fuel consumption per 100 kilometers for the Audi A7?

Audi A7 has an average fuel consumption of 14.45 liters per 100 kilometers. Introduction to fuel consumption: Constant-Speed Fuel Economy refers to the fuel efficiency indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. China also adopts this indicator. Fuel consumption testing: Special personnel select experimental roads, use a specially marked fuel tank to run a 100-kilometer round trip (acceleration fuel consumption can be calculated, but coasting is not allowed), and then divide by two to calculate the actual constant-speed fuel consumption per 100 kilometers.
5
0
Share

How often should the automatic transmission fluid be changed in a new Santana?

The automatic transmission fluid and filter in the new Santana should be replaced every 60,000 kilometers, or every two years or 50,000 kilometers, whichever comes first. Transmission fluid change interval calculation: The replacement cycle for transmission fluid is calculated the same way as the vehicle's maintenance cycle, based on either mileage or time in use. If the vehicle's manual clearly specifies both indicators, follow whichever comes first. If the manual doesn't provide such indicators or doesn't clearly mark the fluid change interval, replace it every 50,000 to 80,000 kilometers. Transmission fluid change methods: Circulating machine fluid change method: This method can completely clean out the old transmission fluid. However, it's relatively expensive and suitable for vehicles less than 5 years old.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.