What are the personal impacts of long-term vehicle inspection delinquency?

How to Read the Engine Oil Dipstick in a Car

Method for reading the engine oil dipstick in a car: 1. Locate the dipstick handle in the engine compartment; 2. Pull out the dipstick and use a tissue to completely wipe off the oil stuck to the dipstick head. At this point, you can clearly see the position of the dipstick's markings (usually there are MIN and MAX markings); 3. Reinsert the cleaned dipstick all the way in, then pull it out again. The oil stuck to the end of the dipstick can now be used for observation; 4. By observing the oil stuck to the dipstick, you can determine the highest point of the oil in the engine; 5. If the oil level is between the MIN and MAX markings, this is the most ideal position, indicating that the engine oil level is just right.

19

3

Share

How to Open the Hood of the Tiguan L?

The method to open the hood of the Tiguan L is: 1. Pull down the lever located on the left side of the driver's left leg; 2. After hearing a 'pop' sound, walk to the front of the car, reach under the hood, and pull up the small latch; 3. Use your right hand to lift the hood and your left hand to insert the support rod into the corresponding hole inside the hood. The Tiguan L is a mid-size SUV with body dimensions of: length 4712 mm, width 1839 mm, height 1673 mm, wheelbase 2791 mm, and a fuel tank capacity of 60 liters. The Tiguan L is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.

19

5

Share

What happens if the supercharger bypass valve rod is adjusted shorter?

It will increase the turbo pressure, while adjusting it longer will decrease the turbo pressure. Relevant information about the supercharger is as follows: 1. Supercharger: A piston-type aircraft engine is a device used to increase the intake pressure of the cylinder. Before entering the engine cylinder, the air is first compressed by the supercharger to increase the air density, allowing more air to fill the cylinder, thereby increasing the engine power. An engine equipped with a supercharger can not only output greater takeoff power but also improve the engine's altitude characteristics. 2. Automotive supercharger: Supercharging is a technology that compresses the air before supplying it to the cylinder to increase air density and intake volume. The purpose is to increase the air charge, improve power, enhance fuel economy, and reduce emissions.

16

4

Share

What does SVS on the dashboard mean?

SVS on the dashboard refers to the engine malfunction indicator light. The light turns on when the vehicle's ignition key is turned on and goes off after the vehicle is started. When the engine ECU detects a fault, the SVS light illuminates. If the light comes on while the vehicle is in motion, it indicates a fault in the vehicle's engine. The SVS light is a standard indicator in the automotive industry, responsible for warning of abnormalities in the powertrain system and prompting users to take the vehicle to a service center for inspection. The alert originates from the engine, transmission, and gear shift control mechanism. Fuel-injected vehicles all have an SVS fault indicator light; for manual transmissions, it serves as the engine fault indicator, while for automatic transmissions, it indicates both engine and automatic transmission faults.

10

4

Share

Which Way to Loosen Tire Bolts?

For passenger cars, it's left to loosen and right to tighten. For large trucks, the left-side tires are left to tighten and right to loosen, while the right-side tires are right to tighten and left to loosen. Below is the relevant information: 1. Direction of tire bolts: For passenger cars, tire bolts loosen counterclockwise. For large trucks, the left and right sides differ—the left side (driver's side) has reverse threads, while the right side has standard threads. This means tightening follows the vehicle's forward rolling direction, while loosening follows the reverse direction. 2. Wheel hub bolts: Wheel hub bolts are high-strength bolts that connect the wheels to the vehicle. They attach to the wheel hub unit bearings. Typically, compact cars use 10.9-grade bolts, while medium and large vehicles use 12.9-grade bolts.

8

2

Share

What Causes a Car's Radiator to Boil Over?

Introduction to the causes of a car radiator boiling over: 1. Hot weather; 2. Overloaded air conditioning system; 3. Malfunctioning cooling components. Car boiling over usually refers to when the engine (also known as the motor or internal combustion engine, which is further divided into diesel and gasoline engines based on the type of fuel burned and ignition method) reaches a temperature that is excessively high for its normal operating range, affecting the machine's performance and potentially causing damage. Here are some solutions: 1. Conducting a comprehensive inspection of the car's cooling system is the primary method to prevent boiling over: check if the cooling fan is working properly, if the radiator is leaking, or if there is a lack of coolant. If the radiator is leaking, it should be repaired or replaced promptly. 2. If the radiator is low on fluid, it should be replenished immediately: if the coolant appears cloudy or deteriorated, it should be replaced.

10

4

Share

What are the personal impacts of long-term vehicle inspection delinquency?

How to Read the Engine Oil Dipstick in a Car

How to Open the Hood of the Tiguan L?

What happens if the supercharger bypass valve rod is adjusted shorter?

What does SVS on the dashboard mean?

Which Way to Loosen Tire Bolts?

What Causes a Car's Radiator to Boil Over?

How to Clear the Engine Fault Light on a Peugeot 307?

How to Change the Bluetooth Playback Frequency Band in a Car?

Can a slightly scratched tire be repaired?

Can Wheel Hubs Be Enlarged?