What are the performance differences between Volkswagen Bora and Buick Excelle?

1 Answers
MacHayden
07/30/25 4:28am
The performance comparisons between Volkswagen Bora and Buick Excelle are as follows: 1. Exterior design: The Buick Excelle GT features a full-bodied appearance with excellent aerodynamics. Its front grille is grand and imposing. The Excelle appears more dynamic than the Bora, making it more suitable for younger demographics. 2. Power performance: Due to its heavier body weight, the 1.6L engine of the Excelle GT delivers slightly weaker power output compared to the Bora, with the Bora performing better in acceleration. 3. Fuel consumption: In terms of average fuel consumption, the same displacement Buick Excelle GT consumes slightly more fuel than the Bora. It's widely known that Buick vehicles tend to have higher fuel consumption. Generally, the Excelle consumes about 0.5 liters more fuel per 100km than the Bora. 4. Reputation: Volkswagen's technology is very mature. Although Buick is also good, the Bora enjoys better market reputation due to its stable market performance and long history since launch, earning affirmation from numerous users.
Was this review help?
3
4
Share
More Forum Discussions

Why Does the Gear Shift Go Wrong Immediately in Exam Vehicles?

Exam vehicle gears often shift incorrectly immediately because the student either didn't press the clutch or is unfamiliar with the gear positions. Below is relevant information about vehicle gear shifting: 1. Precautions: When downshifting, use the two-clutch method plus one blip of the throttle. The principle for downshifting with throttle blip is: the faster the speed, the larger the 'throttle blip'; the slower the speed, the smaller the 'throttle blip'. At low engine speeds, use a larger 'throttle blip'; at high speeds, use a smaller one. On flat roads, use a larger 'throttle blip'; when going uphill, use a smaller one. 2. Techniques: Gear shifting should be timely, accurate, smooth, and swift. When starting the car, generally use the low gear (first gear). After starting, as soon as road conditions permit, promptly and sequentially shift up to higher gears.
12
2
Share

What does P+R parking lot mean?

P+R parking lot refers to a park-and-ride parking facility. In the morning, drivers park their cars in the P+R parking lot and then transfer to the subway to reach their workplaces. After work, they take the subway back to the parking lot and drive home. Benefits of P+R parking lots: They can effectively meet the travel needs of some citizens, reducing unpredictable traffic congestion on one hand and saving fuel costs on the other. This is the most notable feature of P+R parking lots. Compared to other parking facilities, car owners who park and transfer according to regulations can enjoy certain discounts on parking fees. Parking lot: A parking lot is a designated area for vehicle parking. There are simple parking lots with only marked parking spaces and no management or fees, as well as paid parking lots equipped with entry/exit barriers, parking attendants, and time-based fee collectors. Modern parking lots often feature automated time-based fee collection systems, closed-circuit television, and video recording systems.
20
4
Share

Why does the outside of the car window fog up when the air conditioning is on?

When the car's air conditioning is turned on, the outside of the window fogs up because the outside temperature is lower than the inside temperature, causing water vapor inside the car to form many tiny water droplets. Since the surface of the windshield is not perfectly smooth, these small water droplets adhere to the windshield. Below are some precautions for using the air conditioning system: 1. Check the cooling effect: The car's air conditioning system is generally unused during winter. Before initial startup, check the belt tension and let the engine idle for a while to observe if it starts normally and check the cooling effect during operation. If it does not start or the cooling effect is unsatisfactory, take it to a service station for inspection. 2. Clean the air conditioning system: The air conditioning system tends to accumulate dust and bacteria during use, so after prolonged use, it should undergo a dust and bacteria removal treatment to ensure the health of the passengers.
10
5
Share

What is PEA in fuel additives?

PEA in fuel additives is a material for cleaning agents. The function of fuel additives: Fuel additives, commonly known as the third generation of gasoline detergents (also referred to as gasoline detergents or fuel additives), are designed to address carbon deposit issues in the fuel system of fuel-injected vehicles, quickly restore the engine to optimal performance, and compensate for certain deficiencies in gasoline properties while imparting new beneficial characteristics (such as improving atomization, reducing wear, protecting the engine, lowering emissions, etc.). Composition of fuel additives: Fuel additives mainly consist of more than ten components, including nano-molecules, cleaning activation factors, antioxidants, anti-corrosion agents, demulsifiers, etc. They are developed to target harmful substances in fuel such as sulfur, gum, and engine carbon deposits, thereby achieving effects like enhancing power, promoting combustion, anti-oxidation, anti-wear, cleaning, dispersion, demulsification, anti-corrosion, and lubrication.
9
4
Share

Where to Find the Transmission Model Number of a Car?

Transmission mainly refers to the gearbox of a car. It is divided into manual and automatic types. The manual transmission mainly consists of gears and shafts, while the automatic transmission (AT) is composed of a torque converter, planetary gears, and a hydraulic control system. The methods to check the transmission model number of a car are as follows: 1. Transmission nameplate identification: There is a small metal nameplate on the engine and transmission housing, which usually indicates the name of the automatic transmission manufacturer, model, production serial number code, torque converter specifications, etc. 2. Vehicle nameplate identification: Some cars have a vehicle nameplate in the engine compartment, inside the driver's compartment, on the door pillar, etc. These nameplates usually contain the car's model, engine model, transmission model, etc. 3. Housing marking identification: Some transmissions have the model number marked on the housing and oil pan.
16
5
Share

How Many Ring Roads Can Beijing-Licensed Pickup Trucks Enter?

Pickup trucks are prohibited from driving within the Fifth Ring Road in Beijing. Here are the detailed regulations: 1. Time and Area Restrictions: Pickup trucks are classified as light-duty trucks and are banned from entering roads within the Fifth Ring Road between 6:00 AM and 11:00 PM daily. Violators will be fined 100 RMB and receive 3 penalty points on their driver's license. Although pickup trucks use a sedan chassis, they feature a truck body, which prohibits them from driving on urban roads in Beijing. 2. Introduction to Pickup Trucks: A pickup truck is a vehicle with an open-top cargo area behind the cab, where the cargo bed sides are integrated with the cab. From the front, it resembles an SUV, while from the rear, it looks like a utility vehicle. Pickup trucks are an important segment of the automotive market. The most common type in the market is the double-cab pickup, which can serve both as a commercial vehicle and a family car. Although pickup trucks have not been in the domestic market for very long, they are highly popular models in the United States.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.