What are the performance differences between Volkswagen Bora and Buick Excelle?

2 Answers
OAutumn
07/28/25 11:29pm
Bora has dimensions of 4523×1775×1467mm with a three-dimensional design, while Excelle measures 4419×1814×1489mm and adopts a front-wheel-drive system, integrating performance with comfort. Both models are star vehicles of their respective brands. The differences between Volkswagen Bora and Buick Excelle are as follows: 1. Price: The top-end Excelle has a lower official price than the top-end Bora. 2. Overall body: The top-end Excelle is shorter in length than the top-end Bora, and its wheelbase is also shorter. 3. Overall configuration: The top-end Bora offers more features than the top-end Excelle. 4. Power output: The top-end Bora delivers stronger performance than the top-end Excelle.
Was this review help?
7
2
Share
ValeriaLee
08/12/25 3:51am
To be honest, I'm speaking from a young car buyer's perspective, having driven both my friend's Bora and my family's Excelle. The performance difference is quite noticeable. The Bora's 1.5L engine starts smoothly and is sufficient for daily use, but acceleration is a bit sluggish, especially when climbing hills. The Excelle's 1.3T turbocharged engine is more powerful, delivering strong thrust with a tap of the accelerator, making it ideal for those who enjoy the thrill of speed. In terms of handling, the Bora has a stiffer chassis, doesn't drift when turning, and feels stable when overtaking, embodying that solid German car feel. The Excelle's suspension is softer, providing a more comfortable ride on highways but tends to sway during sharp turns. Fuel consumption is another major difference: the Bora consumes about 7L per 100km in city driving, being economical and fuel-efficient, while the Excelle, though more powerful, is thirstier, averaging over 8L on long trips. Additionally, maintenance-wise, Bora parts are cheaper, whereas the Excelle has fewer minor issues but slightly pricier upkeep. Choosing between them depends on whether you prioritize economy and practicality or spirited driving.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

How to reset the tire pressure on a Lincoln MKX?

Lincoln MKX tire pressure reset method is as follows: 1. When the tire pressure monitoring system warning light comes on, immediately reduce speed and check the tires. 2. Use the built-in simple inflation device or a tire pressure gauge to measure and inflate each tire. 3. You can drive slowly to find the nearest service area. 4. After adjusting the tire pressure to normal, start the ignition switch and long-press the tire pressure monitoring reset button. 5. Release the button after hearing a "ding" sound, and the reset is complete. Below is a brief introduction to the Lincoln MKX: 1. The Lincoln MKX gives an overall impression of being honest, steady, and full of modernity. The winged family front grille remains the most eye-catching highlight, while the straight waterfall-style LED headlights and lower bumper are the most obvious features distinguishing it from the MKC. The side lines of the MKX are relatively simple, but the raised lines have a strong muscular feel. In terms of body size, it is 4844mm in length, 1936mm in width, 1687mm in height, with a wheelbase of 2849mm, making it a standard mid-to-large SUV size. 2. In terms of power, the MKX offers a choice between a 2.0T-EcoBoost high-power turbocharged engine and a 2.7T-V6-EcoBoost turbocharged engine. The 2.0T engine has a maximum output power of 186kW (253PS) and a peak torque of 378Nm; the 2.7T engine has a maximum power of 250kW (340PS) and a peak torque of 542Nm, with the data comprehensively surpassing ABB's 3.0T, fully showcasing American-style power. The transmission is matched with a 6AT gearbox, and there are options for front-wheel drive and four-wheel drive.
12
3
Share

Does a car need fuel when idling with the AC on?

A car does need fuel when idling with the AC on. Here are some precautions regarding using car air conditioning: 1. Try to avoid smoking: Many people occasionally smoke to stay alert while using the car air conditioning. However, if you smoke with the AC on, the smoke cannot be promptly vented outside the car, which can harm your eyes and respiratory system. 2. Do not adjust the temperature randomly: To cool down quickly, many people set the car air conditioning to the lowest temperature. While this may feel comfortable, it directly affects the human endocrine system. Prolonged exposure to excessively low temperatures can lead to symptoms like leg soreness and overall chills. It's best to maintain a temperature difference of 5-6℃ from the outside.
16
2
Share

What engine is used in the Changan CX20?

The Changan CX20 is equipped with a 1.3-liter naturally aspirated engine and a 1.4-liter naturally aspirated engine. The details are as follows: 1.3-liter naturally aspirated engine: This engine delivers 86 horsepower and a maximum torque of 110 Nm. The maximum power is achieved at 6000 rpm, and the maximum torque is available between 3000 and 4000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a 4AT automatic transmission. 1.4-liter naturally aspirated engine: This engine produces 101 horsepower and a maximum torque of 131 Nm. It also employs multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is matched with either a 5-speed manual transmission or a 5-speed AMT transmission.
10
4
Share

What are the requirements for upgrading from a C1 driver's license to a B1?

Yes. According to regulations, you can upgrade to a B1 license after holding a C1 license for more than three years. The requirements for upgrading are as follows: Hold a C1 license for more than three years; No record of full penalty points in the last two scoring cycles, no record of drunk driving, and no record of being primarily or fully responsible in a fatal accident; Age between 21 and 50 years old; height above 155 cm. What is a C1 driver's license: It is a type of motor vehicle driver's license code. The C1 license allows driving small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Age requirements for application: The minimum age for a C1 license is 18 years old, with no upper age limit. However, applicants aged 70 or above must pass tests for memory, judgment, and reaction abilities.
15
5
Share

Why can't I schedule Subject 3 on 12123?

The reasons for being unable to schedule Subject 3 on the Traffic Management 12123 platform are as follows: 1. Ranking exceeds available slots: If your scheduling rank exceeds the test center's capacity, the chance of successful scheduling is extremely low unless some candidates cancel their appointments. 2. Multiple cancellations: Note that there are limits on cancellation times for each subject. Frequent cancellations may negatively impact your next scheduling attempt. 3. Incomplete training hours: Scheduling will fail if required Subject 3 training hours aren't completed. Typically, Subject 3 requires 16 hours of theoretical training and 24 hours of practical training, with slight regional variations - please refer to local standards. 4. Exam cheating: Candidates who had scores canceled due to cheating must wait one year before rescheduling, during which any scheduling attempts will fail.
4
0
Share

What kind of engine oil does FAW T-Roc use?

Both the 1.4T and 2.0T models of Volkswagen T-Roc use 5w40 engine oil with a replacement capacity of 4L. Fully synthetic oil is recommended, with a replacement interval of 10,000 kilometers. Recommended brands: internationally recognized brands such as Shell, Castrol, and Mobil; domestic brands include Great Wall, Tongyi, and Kunlun. The tutorial for replacing the oil filter of Volkswagen T-Roc is as follows: 1. Friendly reminder: Before preparing to change the engine oil, turn off the engine for half an hour to allow the oil adhering to the cylinder walls to flow back into the oil pan, otherwise there will be residual oil. 2. First, remove the engine cover. (Remove the four clips of the cover) 3. Use a lift to raise the vehicle for operation, or directly use an electric oil pump to extract the oil. Pull out the oil dipstick and insert the hose of the oil extractor into the dipstick port until it reaches the bottom. 4. Extracting the oil takes about 15 minutes, and the used oil can be collected in a bucket. 5. After extracting the old oil, use a wrench and socket to remove the oil filter, wipe off any excess oil on the contact surface, and then install the prepared new oil filter. (Note: Usually, the oil filter is placed on top, but for some models, the oil filter needs to be removed and installed under the vehicle.) 6. After adding the new oil, it is necessary to check the amount of oil added, which can be observed through the oil dipstick. When checking the oil dipstick for the first time, wipe it clean with a tissue and reinsert it; the second check will be accurate. The oil dipstick has two marks, upper and lower limits, and the oil level should be between these two marks for normal operation.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.