What are the penalty standards for stopping midway in Subject 2?

1 Answers
OAbigail
07/29/25 1:01pm
Stopping midway during reverse parking, parallel parking, or right-angle turns results in a 5-point deduction, while stopping during curve driving (S-curve) leads to an immediate failure. Except for designated stopping areas, any pause lasting more than 2 seconds or an abrupt stop is considered stopping midway and will be penalized. For the C1 license test, the required items include reverse parking, parallel parking, hill start and stop, right-angle turns, and curve driving (commonly known as S-curve). Some regions may include a sixth item, such as highway toll card collection. The C2 license test includes reverse parking, parallel parking, right-angle turns, and curve driving (S-curve). For large vehicles (A1, A2, A3, B1, B2), the test items include pole test, hill start and stop, parallel parking, single-plank bridge, curve driving, right-angle turns, narrow gate passage, continuous obstacle course, bumpy road driving, narrow road U-turn, and simulated scenarios such as highways, continuous mountain curves, tunnels, rain/fog conditions, slippery roads, and emergency handling. If you fail during Subject 2, you can continue completing the remaining items before returning to the starting point for a free retake. If the retake is also unsuccessful, the test will be terminated, and you must wait at least 10 days before reapplying. You have a total of 5 attempts for Subject 2. If you fail the 5th attempt, you must restart the driving test from Subject 1. Tips to avoid stopping midway in Subject 2: Increase speed slightly when encountering road transitions or uneven surfaces. When performing maneuvers requiring full steering lock, slightly release the clutch to prevent stalling due to insufficient power. Coordinate clutch and brake use—release the clutch more when moving slowly, avoid heavy braking, and apply throttle if necessary. Stopping outside the test area is not considered stopping midway. If another candidate is ahead in a test area, you may wait outside without penalty.
Was this review help?
7
0
Share
More Forum Discussions

How to Check Volkswagen Genuine Parts?

Genuine parts manufacturers have fixed retail prices for parts within a certain region, and some even have nationwide uniform pricing. The price difference for the same type of products from different manufacturers is minimal. Genuine parts packaging is relatively standardized, with the product name, specifications, quantity, registered trademark, manufacturer's name and address, and contact number clearly marked on the packaging. The printing, engraving, or casting marks on the surface of genuine parts are clear and are the result of obvious mechanical work. Some parts may also have assembly marks engraved on their surfaces. Counterfeiters may simply process and refurbish used parts before selling them as new. If the surface paint is not smooth and even, or has small bumps, it is definitely a refurbished part. Check the surface of the part for rust. Qualified parts have both precision and smoothness on their mating surfaces, with more important parts having higher precision.
18
5
Share

How to Use the Paddle Shifters on the Tiggo 8 Plus?

Generally, it defaults to starting in sport mode. You just need to shift the gear to S mode to use the paddle shifters. You need to set up the activation for D and S modes in the vehicle's computer. When in D mode, press and hold the '+' on the paddle shifter for 3 seconds to use the paddle shifters. To switch back from S mode to D mode, simply shift to D mode, but this will deactivate the paddle shifters. Switching from D mode to S mode in sport mode will not affect the paddle shifters. S mode will deactivate when switched back to D mode. To deactivate in D mode, press and hold the '+' on the paddle shifter for 3 seconds again. If unused for a long time, it will deactivate automatically.
2
2
Share

How to Adjust the Height of an Electric Tailgate?

Enter the vehicle's cabin, press and hold the start button for 7 seconds without stepping on the brake to turn on the ignition. The dashboard lighting up indicates success. Manually open the electric tailgate to the desired position, ensuring the highest point of the vehicle is approximately 185cm from the ground with the hood closed and in an unloaded state. Press and hold the close button inside the tailgate for 5 seconds until you hear a beep, indicating successful setting. Close the electric tailgate and reopen it; the tailgate will automatically open to check if it reaches the set position.
17
5
Share

What is the difference between violation photography and speed limit photography?

The differences between violation photography and speed limit photography are as follows: 1. Different cameras: Speed limit photography and surveillance photography use two different types of cameras. 2. Different photography methods: Speed limit photography uses high-speed, high-sensitivity cameras and flashlights with sensing devices. The photography device is equipped with induction coils (sensors), which automatically trigger the flash when a vehicle is detected. Surveillance photography uses conventional cameras, primarily for observing traffic flow and road conditions. For surveillance photography, at least 3 or more photos are required to prove speeding. 3. Different purposes: Speed limit photography aims to prevent speeding, while violation photography aims to prevent violations. On ordinary roads, speed limits of 70 and 50 are the most common.
18
1
Share

Which Vehicles Are Suitable for Mobil Oil?

Mobil oil is generally suitable for most vehicles, but it is not recommended for large-displacement turbocharged cars. Mobil 1 is ideal for high-end vehicles, Mobil Super 2000 is suitable for mid-range cars, Mobil 1000 fits cars priced around 100,000 yuan, Mobil Delvac is designed for low-end vehicles, and Mobil Delvac Black is tailored for large trucks and buses. Below is an introduction to oil classifications: 1. Mineral Oil: Mineral oil is extracted from natural minerals. 2. Synthetic Oil: Synthetic oil is artificially formulated through chemical processes. 3. Semi-Synthetic Oil: Semi-synthetic oil is a blend of synthetic and mineral oils.
16
5
Share

Where is the trunk escape switch located?

Open the trunk, and you will find a small black box on the upper part of the trunk lid. Inside this box is the trunk escape device, also known as the trunk escape button. As the frequency of traffic accidents increases, many manufacturers have designed this button for safety purposes. There are several types of escape devices: 1. Pull-string or pull-ring escape device: Usually, there is a pull-string or pull-ring on the trunk lid, and some even use self-luminous materials, making it easy for the owner to locate in the very dark environment of the trunk. There is no difficulty in operation; just pull it outward with force to open the trunk. 2. Cover-type escape device: There is usually a cover plate that needs to be pried open during use, and then the lock core can be moved with a finger to pop open the trunk. 3. Hidden escape device: The opening device is usually hidden in a small hole and requires auxiliary tools like a key to operate.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.