···
Log in / Register

What are the penalties for using fake vehicle documents?

4 Answers
JayceMarie
09/08/25 3:20am

Detain the motor vehicle, impose detention for up to 15 days, and impose a fine ranging from 2,000 to 5,000 yuan. If the act constitutes a crime, criminal liability shall be investigated according to law. If the party concerned provides corresponding legal certificates or completes corresponding procedures, the motor vehicle shall be returned in time.

Was this review help?
8
4
Share
OAdriel
09/20/25 2:08am

I heard that the penalties for forging documents are quite severe, especially in the automotive field. For example, if someone is caught forging a driver's license, the traffic police can impose a fine directly, which could amount to several thousand yuan, or even detain them for up to fifteen days. In serious cases, it can constitute a crime, leading to several years of imprisonment. Don't think you can get away with it by luck—surveillance technology is very advanced now, and they can catch you every time. I've seen many cases where those caught had their licenses revoked and their lifelong credit records affected, making it extremely difficult to find a job or apply for loans. I really advise everyone to do things honestly and obtain documents from official institutions to avoid a single misstep leading to lifelong regret. After all, safe driving is the right way to go.

Was this review help?
18
4
Share
Expand All
WilliamMarie
11/03/25 2:29am

My friend once tried to use fake documents, and it turned out to be a total disaster. After getting caught, he was fined 5,000 yuan, had his driver's license suspended for three years, and was detained for 15 days. That money could have bought some nice car parts, but it all went down the drain. Since then, he's been extra careful when driving and always warns me not to try forging documents. Actually, the law clearly states: forging documents is a crime, punishable by fines and detention for minor offenses, or even several years in prison for serious ones. Personally, I think it's really not worth it—not only does it harm yourself, but it could also affect your family's life. Following the rules is the most hassle-free and sensible choice.

Was this review help?
3
4
Share
Expand All
DelAxel
12/17/25 2:29am

Forging documents is severely punished. According to traffic regulations, if caught, you will face hefty fines and detention immediately. In severe cases, it may lead to imprisonment, with the sentence depending on the case. Personally, I believe this is equivalent to ruining your driving career and may also damage your personal reputation. In short, obtaining documents legally is the simplest and safest way. Don't take any shortcuts.

Was this review help?
6
5
Share
Expand All
More Forum Discussions

How to remove H4 headlight bezel?

First, of course, remove the old headlight, but you need to take off the front guardrail first. Remove several screws at the top and bottom to take it off, along with the grille; then unplug the headlight assembly power supply; use the corresponding screwdriver to remove the headlight screws. Use the corresponding screwdriver to remove the headlight screws, usually four screws. There are several small screws on the bezel; after removing them, you can take off the panel. After opening, be sure to clean the residual glue on the rear cover groove, then apply new glue. Pay attention when applying the glue: apply more and ensure the glue line is continuous. Finally, install the new headlight according to the removal method.
8
3
Share

How to Drain Summer Windshield Washer Fluid?

First, open the front hood safety lock, extend your hand to release the front hood, lift the safety latch upwards, and open the hood. Open the windshield washer fluid reservoir cap, insert a roughly 2-meter-long hose into it, pushing it as deep inside as possible. Then, from the other end of the hose, siphon out the fluid from the reservoir. When the fluid level drops to about the height of the headlights, lower the hose. Wait until the reservoir is completely drained, lift the funnel upwards, and add a small amount of new windshield washer fluid concentrate into the reservoir. Activate the windshield wipers to draw up and spray the new windshield washer fluid concentrate, thereby clearing any residual fluid from the pipes.
16
3
Share

How to Replace Coolant

Wait at least 10 minutes after the engine is turned off before replacing coolant. The coolant temperature remains dangerously high immediately after driving and can cause burns. Check all pipes for signs of leakage or cracks, and inspect the five-way water pipe. If there's any coolant leakage, replace the hose or resecure the connection as needed. Use a jack to lift the vehicle. Loosen the radiator drain plug with a wrench and collect the old fluid in a waste container. Cover the expansion tank cap with a thick towel and slowly loosen it until pressure is fully released before completely removing the cap. Use compressed air blower or apply pressure with a thick towel at the expansion tank filler neck to purge residual coolant from the engine block. Then fill with new coolant up to the maximum level mark.
8
3
Share

How to Automatically Fold the Rearview Mirrors on the Trumpchi GS4?

To operate the folding of the vehicle's rearview mirrors, you need to locate the rearview mirror control button on the door panel of the driver's side. The two buttons at the top of the rearview mirror button area control the left and right rearview mirrors, while the directional button in the middle is used to adjust the mirror angle. The two buttons directly below, the one on the right is the button that controls the folding (and unfolding) of the rearview mirrors on the Trumpchi GS4. Finally, press the rearview mirror folding button, and the rearview mirrors of the Trumpchi GS4 will automatically fold.
14
1
Share

How to reset the oil reminder on a 2013 Ford Ecosport?

With the vehicle off but the power on, open the door and press the reset button on the vehicle body. If the light comes on, it indicates normal operation. With the vehicle powered on, press and hold the trip meter reset button for about ten seconds to use the reset function and clear the monitoring. Turn the key to position 2 to illuminate all dashboard lights, then simultaneously press the brake and accelerator pedals. Note that the brake may require slightly more effort as there is no power assist. Hold the SET button, then press the dashboard indicator light with your hand for approximately 3-5 seconds. A response indicates normal operation. The oil symbol will appear on the center of the dashboard. Press the corresponding menu items one by one until the warning light disappears.
18
3
Share

How to Remove Aging Marks on Car Headlights?

Clean dust, dirt, and other debris from the surface of the headlights with a soft cloth. Be sure to use a professional car cleaning towel to avoid secondary damage to the lamp cover. Wash the headlights with soapy water; avoid using laundry detergent as it has some corrosive properties. After cleaning, use a clean soft cloth to polish the headlights. Apply polishing wax or polish to enhance the glossiness of the headlights for maintenance. Clean dust, dirt, and other debris from the surface of the headlights with a soft cloth. Be sure to use a professional car cleaning towel to avoid secondary damage to the lamp cover.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.