What are the penalties for speeding on highways in C language?

1 Answers
VonRosalie
07/30/25 1:29am
In C language, penalties for speeding on highways are as follows: a fine is imposed if the speed reaches or exceeds 10% of the lane's speed limit; if it reaches or exceeds 50%, the driver's license will be revoked. Definition of speeding: Driving at 45 km/h on a road with a speed limit of 40 km/h falls within the range of exceeding the speed limit by more than 10% but less than 20%. According to the new traffic regulations, for violations where the speed exceeds the limit by less than 50% on a 40 km/h road, the traffic police will only issue a warning without imposing a fine or deducting points. Precautions for driving: When driving, it is necessary to observe the speed limit indicated by roadside signs and markings, and always monitor the speedometer on the vehicle's dashboard to avoid committing speeding violations.
Was this review help?
18
4
Share
More Forum Discussions

Why Does the Car Make a Squeaking Sound When Braking?

It is normal for a car to make noise when the brakes are applied, as the brake pads and brake discs rub against each other, causing sound. Below is an introduction to car braking: Brake System Introduction: Braking, also known as stopping, refers to the action of halting or reducing the speed of moving locomotives, vehicles, and other transport tools or machinery. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. Purpose of Braking: The goal is to decelerate, reducing speed or bringing the vehicle to a stop. The principle of braking is to convert the kinetic energy of the car into heat energy, which is then dissipated. The kinetic energy comes from the power provided by the engine, which requires fuel combustion to generate work. Drum Brakes: Two semi-circular brake shoes are installed inside the wheel, and the "lever principle" is used to push the brake shoes into contact with the inner surface of the brake drum, creating friction. Drum brakes utilize stationary brake shoes inside the brake drum to rub against the rotating drum, generating friction to reduce the wheel's rotation speed. When the brake pedal is pressed, the force from the foot causes the piston in the master cylinder to push brake fluid forward, creating pressure in the hydraulic circuit. This pressure is transmitted via brake fluid to the wheel cylinders at each wheel, where the pistons push the brake shoes outward, causing them to rub against the inner surface of the brake drum. This generates sufficient friction to reduce the wheel's rotation speed, achieving the braking effect.
9
3
Share

How to Repair When the EDC Light Comes On in a Yuejin Truck?

When the EDC (Electronic Diesel Control) light appears on the dashboard, it indicates an issue with the diesel injection electronic control system, signaling an engine fault. If the EDC warning light illuminates, it means there is a problem with the engine, and the owner should promptly visit a repair shop for inspection and servicing. Below are some extended details: 1. High-voltage line malfunction: If the vehicle fails to start normally, it may be due to excessive carbon buildup in the throttle, an abnormal fuel pump condition, or a clogged fuel filter. 2. High-voltage circuit malfunction: If the engine starts and runs normally, the issue may not severely harm the engine. Possible causes include damage to the high-voltage circuit, fuel injectors, or oxygen sensors, leading to increased fuel consumption.
9
2
Share

Why is the Excelle Recalled to Replace the Intermediate Steering Shaft?

Because many car owners have complained about steering wheel jamming, abnormal noise, low-speed steering or reversing steering, and the steering wheel being very heavy and tight. Therefore, the Excelle is recalled to replace the intermediate steering shaft and upgrade the electronic steering system program for free. The following are the functions of the steering transmission shaft: 1. Transmitting force: The function of the steering shaft is to transmit the steering torque applied by the driver to the steering wheel to the steering gear. Its upper part is fixedly connected to the steering wheel, and the lower part is connected to the steering gear. The steering shaft passes through the steering column tube and is supported by bearings and bushings inside the column tube. 2. Energy absorption: Some steering shafts not only have a certain stiffness but also have energy absorption functions, which play a role in injury prevention.
3
3
Share

What Causes a Manual Transmission Car to Stall When Starting?

Manual transmission cars stall when starting due to not shifting gears promptly after releasing the clutch. The correct starting method is: 1. After starting the car, fully depress the clutch with your left foot to prepare for the semi-engaged state; 2. Shift into first gear; 3. Gently push the turn signal lever downward with your left hand to activate the left turn signal, alerting vehicles in front and behind; 4. Press the horn button in the center of the steering wheel to warn pedestrians ahead, preparing to start; 5. With your right hand, press and hold the button in front of the handbrake, then lift and fully lower the handbrake; 6. Slowly raise your left foot until the clutch reaches the semi-engaged state. When the vehicle begins to vibrate slightly, it indicates sufficient power. Release the throttle, depress the clutch, and shift into second gear.
10
5
Share

How many color options are available for the Geely Boyue?

Geely Boyue offers 6 color options, which are: Han Jade White, Agate Brown, Titanium Platinum, Pearl Silver, Black Jade, and Coral Red. The Geely Boyue is equipped with a 7-inch full LCD 3D dynamic combination instrument panel, a NAPPA luxury leather multifunction steering wheel, an EPB electronic parking brake system, and an AUTOHOLD automatic parking system. In terms of power, the Geely Boyue provides diversified power options, including a 1.8TD engine, a 2.0L naturally aspirated engine, and a 6-speed manual transmission. Regarding body dimensions, the Geely Boyue measures 4519mm in length, 1831mm in width, and 1694mm in height.
18
5
Share

What is the Real Purpose of a Car Sunroof?

Car sunroofs serve several functions including rapid cooling, defogging, and quick air exchange. Additional details are as follows: 1. Rapid Cooling: If your car is parked under direct sunlight, especially in summer, the interior temperature can easily exceed 60℃. Many drivers instinctively turn on the air conditioning upon entering the car. However, the more effective approach is to first open the windows and sunroof while driving, which quickly draws out the hot air and achieves cooling. This method cools the car about three times faster than using the air conditioning alone and also saves fuel. 2. Defogging: During seasons with significant temperature variations, if the side windows are closed while driving, the windshield is prone to fogging up. Opening the sunroof for a few minutes can quickly eliminate the fog. 3. Quick Air Exchange: Opening the sunroof while driving rapidly increases air circulation inside the car, thereby improving ventilation and air exchange within the cabin.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.