What are the penalties for not wearing a seat belt as required?

1 Answers
MacOmar
07/30/25 12:49am
When driving on urban expressways, if the driver fails to use the seat belt as required, a fine will be imposed and 2 points will be deducted. When driving on roads other than highways or urban expressways, if the driver fails to use the seat belt as required, a fine will be imposed but no points will be deducted. When a motor vehicle is in motion, if a passenger fails to use the seat belt as required, a fine will be imposed. Here is some additional information: 1. The function of seat belts: Seat belts are safety components used in equipment, such as when riding aircraft or performing high-altitude work or artistic performances, to ensure safety. The main materials are polyester, polypropylene, and nylon. Seat belts do not only refer to the webbing; besides the webbing, seat belts are also assembled with other components. "Seat belts" have become a primary consideration for drivers and passengers, and are also one of the most important features of automobiles. 2. Precautions for wearing seat belts: (1) The lap belt should be worn snugly across the lower part of the hips, in contact with the pelvic bones. In a collision, the force will act on the pelvic bones, avoiding serious injury caused by the belt tightening around the abdomen. (2) The shoulder belt should be worn across the shoulder and chest. These parts of the body can better withstand the restraining force of the seat belt. (3) To ensure the lap belt is tight, pull down on the lap belt at the buckle end while pulling up on the shoulder belt.
Was this review help?
16
3
Share
More Forum Discussions

How to Remove Small Yellow Spots on a White Car Body?

Small yellow spots on a white car body can be removed with a cleaner. Here are the methods to remove small yellow spots: Using Iron Remover: Apply an iron remover evenly on the yellow spots, then wipe with a car wash sponge or towel. If it doesn't come off, you can also use a clay bar for polishing and wiping. Using Asphalt Remover: Spray and wipe with a dedicated tar cleaner. Tar cleaner is a powerful cleaning agent with some corrosive properties. Prolonged residue of tar cleaner can also corrode the car paint. After using tar cleaner to clean the car, rinse it with water again to avoid any cleaner residue.
12
5
Share

What are the differences between the Mercedes-Benz E300 and the Audi A6?

Here are the differences between the Mercedes-Benz E300 and the Audi A6: Dimensions: The Mercedes-Benz E300 measures 5078mm in length, 1860mm in width, and 1484mm in height; the Audi A6 measures 5038mm in length, 1886mm in width, and 1475mm in height. Transmission: The Mercedes-Benz E300 is equipped with a 9-speed automatic transmission; the Audi A6 is equipped with a 7-speed dual-clutch transmission. Power: The Mercedes-Benz E300 is powered by a 2.0T turbocharged engine with a maximum power of 135kW and a peak torque of 280Nm; the Audi A6 is powered by a 2.0T turbocharged engine with a maximum power of 140kW and a peak torque of 320Nm.
5
2
Share

What is the actual fuel consumption of the BMW 320?

The actual fuel consumption of the 2022 BMW 320 is 6.2L per 100 kilometers. The following are the factors affecting fuel consumption: Irregular driving habits: Harsh braking, driving at high speeds in low gears, frequent braking, and aggressive acceleration when starting can all increase the vehicle's fuel consumption. Carbon deposits in the transmission: Carbon deposits in the transmission can reduce engine power and, to some extent, lead to increased fuel consumption. This is because achieving the same power output as before the carbon buildup requires increasing throttle opening and corresponding fuel supply. Poor road conditions: When road conditions are poor, frequent switching between acceleration and braking can easily increase fuel consumption. Generally, flat roads are more fuel-efficient than uneven roads, straight roads are more fuel-efficient than winding roads, and smooth traffic is more fuel-efficient than congested traffic.
13
1
Share

How to Remove the Memory Card from a Dash Cam?

Press the memory card after opening the dash cam to remove it. Here is a detailed introduction to the memory card of a dash cam: Storage Location: Swing the dash cam, and the memory card is located at the top side of the dash cam. Operation Method: After opening the dash cam, you will see a black card. Press the memory card downward with your hand, and a click sound indicates that the memory card has been ejected. Screen Display Reminder: At this time, the dash cam's screen will display a prompt indicating no memory card. There is a memory card slot next to the dash cam. Turn off the dash cam and press the memory card inward with your hand to eject it. Dash cams require a memory card to function. The memory card is usually located on the side or bottom, and the position varies for different models of dash cams.
5
2
Share

How to Extend the Lifespan of a Car Battery?

Do not use electrical devices for extended periods after turning off the engine. When the battery is used without charging, it enters a "dry consumption" state, which can reduce its capacity and potentially prevent the vehicle from starting. Excessive discharge can cause significant damage to the car battery itself. After turning off the engine, make sure to turn off the lights and unplug any external devices. With the increasing number of external devices in cars, additional electrical equipment adds to the battery's burden. Before turning off the engine, shut down the multimedia and air conditioning systems. If these systems are not turned off, they will automatically activate the next time the vehicle starts, creating an excessive instantaneous power load. Particularly, if the air conditioner is left on, it can lead to prolonged battery drain. Avoid prolonged or frequent ignition attempts. When starting the engine, do not exceed 3 seconds of ignition time. If the engine fails to start, avoid frequent or repeated ignition attempts. Wait for at least 15 seconds before trying again. The above are the methods introduced on how to extend the lifespan of a car battery.
6
3
Share

How Long After Replacing a Car Windshield Can You Drive?

Some windshield adhesives are quick-drying and can solidify in about 1-2 hours, while others may take around 6 hours. Currently, standard adhesives on the market require at least 24 hours to reach a safe driving condition. Below is an introduction to windshields: Functions: Laminated glass involves bonding a transparent adhesive plastic film between two or three layers of glass, combining the toughness of plastic with the hardness of glass to enhance the glass's resistance to breakage. Tempered glass is made by quenching ordinary glass to create internal stresses, thereby strengthening the glass. When impacted and broken, tempered glass shatters into small, blunt-edged fragments, reducing the risk of injury to passengers. Maintenance Methods: Choose the appropriate windshield washer fluid. When the windshield surface appears blurry, cleaning it with the right washer fluid can significantly improve clarity. If you notice excessive glare at night, wiping the glass with washer fluid can also help. Additionally, during highway driving or in dusty conditions, washer fluid is used up quickly, so it's important to refill it promptly.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.