What are the penalties for immediately reversing after making an illegal left turn?

Can ETC devices be attached to the black area?

ETC devices can be installed on the black dotted area of the windshield, as long as they do not obstruct the driver's view and can sense the detection equipment of the toll station. However, installing them outside the black dotted area of the windshield has drawbacks, such as reduced solar charging capability of the ETC device, which may lead to power depletion over time. Correct installation position for ETC: For small vehicles like cars and vans, the ETC card and OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle part. ETC installation position requirements: the height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing film of the OBU and attach it to the installation position. Press firmly with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device.

10

1

Share

How to Check if a Car Has a Dash Cam Installed?

After installing a dash cam, you can see the camera on the front windshield or the rearview mirror inside the car. Here are the specific functions of a dash cam: 1. Protect the driver's legal rights: In case of a collision with pedestrians crossing the road or cyclists and motorcyclists, there might be extortion attempts, and the dash cam can provide valid evidence. 2. Facilitate traffic police in handling accidents: By replaying the recorded footage, the responsibility for the accident becomes clear, allowing the police to handle the situation quickly and accurately. This enables rapid clearance of the scene to restore traffic flow while preserving valid evidence of the incident, creating a safe and smooth traffic environment. 3. Reduce accident rates: If every car is equipped with a dash cam, drivers will be less likely to violate traffic rules, leading to a significant decrease in accident rates.

14

2

Share

Which country is Mobil lubricant from?

Mobil 1 full synthetic lubricant is produced by ExxonMobil, which is an American company. Mobil is the transliteration of the oil giant Mobil. ExxonMobil Corporation is a world-leading oil and petrochemical company, founded by John D. Rockefeller in 1882, with its headquarters located in Irving, Texas, USA. Mobil 1 is a fully synthetic motor oil with patented anti-wear technology. Mobil 1, a lubricant brand under ExxonMobil, was introduced in 1974 and has become a globally used synthetic motor oil for vehicles. At the time, its design exceeded industry energy standards, setting a new benchmark in lubrication technology. Mobil 1 meets the latest API SN specification from the American Petroleum Institute, utilizing multiple proprietary anti-wear technologies to effectively help reduce engine wear, keep the engine clean, and meet the demands of modern engine technology and fuel economy with higher standards of engine protection and lubrication performance.

8

3

Share

Is the Subject 4 Test in the Morning or Afternoon?

Subject 4 can be taken either in the morning or afternoon. The following are the precautions for taking Subject 4: 1. Observe examination room discipline: Making noise during the test will result in being expelled from the examination room and disqualification for the day. 2. Follow the instructions of the staff: Raise your hand if you have any questions, and you can ask the examiner if you don’t understand. 3. After sitting down, first verify your candidate information. 4. Adjust the camera position to focus on the upper 1/3 of your face and chest. 5. At the start of the test, quickly familiarize yourself with the special small 'keyboard' used for the test to avoid clicking errors. 6. For multiple-choice questions, ensure no options are missed, and observe the keywords carefully when answering.

9

0

Share

Benefits of Upgrading Car Keys to LCD Smart Keys?

Here are the benefits of upgrading car keys to LCD smart keys: 1. No need to modify the original car, just add comfort access for automatic unlocking when approaching the vehicle. 2. Automatic locking when leaving, with remote control capability. 3. Driving trajectory tracking and real-time vehicle information monitoring, plus automatic window closing. Below are the drawbacks of LCD smart keys: 1. The key consumes battery quickly, requiring charging every two weeks. Due to the LCD screen and the need to sense signals from OBU devices, power consumption is particularly high. However, there are physical buttons around the LCD screen, allowing unlocking even if the screen runs out of power. 2. Supports keyless entry but not keyless start. If your vehicle uses a mechanical key start, you still need to use the original key to start the car after entering, meaning you have to carry two keys when going out. 3. The vehicle unlocks when passing by, which poses a security risk.

3

5

Share

How to Solve the Abnormal Noise of the Oil Pump?

Oil pump abnormal noise solution is: replace the new oil pump. The oil pump is an important part of the fuel supply system. Without the gasoline pump, the fuel supply of the engine will have problems, which will affect the normal operation of the engine. The gasoline pump can draw gasoline from the fuel tank and provide a certain pressure. The oil pump is a kind of light and compact pump, which is divided into three categories: in-line, distributor and single-unit. The oil pump needs a power source to operate, and the camshaft at the lower part is driven by the engine crankshaft gear. The oil pump proposes a pump with a housing made of aluminum-containing material and a movable molded part arranged in the housing, wherein the movable molded part is made of at least one sinterable, at least austenite-containing iron-based alloy material, and wherein the molded part made of a sinterable material has a thermal expansion coefficient of at least 60% of the thermal expansion coefficient of the housing.

11

2

Share

What are the penalties for immediately reversing after making an illegal left turn?

Can ETC devices be attached to the black area?

How to Check if a Car Has a Dash Cam Installed?

Which country is Mobil lubricant from?

Is the Subject 4 Test in the Morning or Afternoon?

Benefits of Upgrading Car Keys to LCD Smart Keys?

How to Solve the Abnormal Noise of the Oil Pump?

Will points be deducted for occupying the overtaking lane for a long time?

How is China VI vehicle defined?

What are the precautions for driving a new car for the first time?

What is the Toyota Wildlander?