What are the penalties for exceeding the speed limit by more than 50% on urban roads?

1 Answers
DelAriana
07/29/25 9:26pm
According to the regulations on the application and use of motor vehicle driving licenses, the Road Traffic Safety Law stipulates that exceeding the speed limit by more than 50% will result in a fine and 12 demerit points. In addition, the motor vehicle driving license may be revoked.
Was this review help?
20
0
Share
More Forum Discussions

How Does a Car Engine Cool Down?

Car engines rely on engine radiators for cooling. The engine radiator, also known as the engine water tank, is a key component of the water-cooled engine cooling system. It cools the engine through forced water circulation, ensuring the engine operates continuously within the normal temperature range. Here are some precautions for using a car engine: 1. Avoid driving in neutral: The engine itself has a fuel-cut function during deceleration, and driving in neutral is not conducive to fuel economy. 2. Pay attention to observation during normal vehicle use: If oil is found on the ground, determine whether there is an engine oil leak and promptly communicate with the car 4S shop to eliminate safety hazards. 3. For cars equipped with turbochargers: Do not turn off the engine immediately after high-speed driving or climbing a slope. Let the engine idle for 10 minutes before shutting it down. Cars with turbochargers accumulate carbon deposits several times faster than naturally aspirated cars. 4. When brake fluid is mixed with or absorbs water, or if impurities or sediments are found in the brake fluid, it should be replaced or carefully filtered in a timely manner. Otherwise, it may cause insufficient braking pressure, affecting braking performance.
7
2
Share

Can the window films from 4S stores be applied?

4S stores often provide free window films that are generally low-quality with poor heat insulation or mid-to-low-end products from certain brands. While not absolute, this is quite common. As for the films available for additional purchase in-store, if they offer objective testing opportunities, they might be acceptable. However, if no testing is available and the installation process is unclear, it's generally not recommended. Below is an introduction to automotive window films: 1. Good privacy protection: Most automotive films are one-way, protecting the owner's privacy, but owners should carefully select the film. 2. Anti-shatter effect: In case of an accident, the film helps keep shattered glass together, preventing dangerous flying shards and protecting passengers. 3. Heat insulation: High-quality automotive films provide effective heat insulation, controlling temperature rise in summer and retaining warmth in winter, creating a comfortable driving environment. 4. Reduced light transmittance: Automotive films typically have a light transmittance of no more than 90%, especially on the windshield, which may slightly reduce visibility and affect driving safety.
6
5
Share

What are the tire model specifications for the Kia K4?

The Kia K4 has two types of tire models: 215/50R17 and 205/60R16. The first number, 215, indicates that the tire width is 215MM. The number 50 represents the aspect ratio of the tire section, which is 50%, meaning the section height is 50% of the width. The letter R stands for radial tire, and 17 indicates that the rim diameter is 17 inches. The Kia K4 has a fuel consumption of 6.6L per 100 kilometers. In addition to the model, the tire also displays the following common data: Tire carcass ply material: Represented by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
13
4
Share

Can I purchase new car insurance by myself?

New car owners can directly purchase insurance from insurance companies. However, when buying a car at a 4S store, the store will aggressively promote insurance and may even coerce owners into purchasing insurance at the 4S store. Insurance Introduction: Vehicle insurance, also known as motor vehicle insurance or car insurance, refers to a type of commercial insurance that covers personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Car insurance is a form of property insurance, and within the field of property insurance, car insurance is a relatively young category. This is because car insurance emerged and developed alongside the appearance and popularization of automobiles. Unlike modern motor vehicle insurance, early car insurance primarily focused on third-party liability coverage and gradually expanded to include risks such as collision damage to the vehicle body. Insurance Categories: Commercial insurance is an indeterminate-value insurance, divided into basic insurance and additional insurance, with the latter not being independently insurable. Basic insurance includes third-party liability insurance and vehicle damage insurance (comprehensive coverage). Additional insurance includes total loss theft insurance (theft coverage), onboard liability insurance, no-fault liability insurance, cargo drop liability insurance, standalone glass breakage insurance, vehicle downtime loss insurance, spontaneous combustion loss insurance, new equipment loss insurance, and deductible waiver insurance.
16
5
Share

What is the Function of Chrome Plating?

Chrome plating enhances the appearance of a car by improving its color, significantly increasing strength, hardness, and wear resistance, while simultaneously reducing plasticity and toughness. Chromium can improve the oxidation resistance and corrosion resistance of steel and also provides protection for some plastic parts. Additionally, when applied to areas like door handles, it can protect the paint surface. Advantages of Chrome Plating: The chrome plating layer has strong adhesion to the base metal. When properly applied, the bonding strength between the plating layer and steel can exceed that of the steel itself. The chrome plating layer exhibits excellent heat resistance and thermal conductivity. It can withstand high temperatures, with discoloration and changes in mechanical properties only occurring above 500 degrees Celsius. The thermal conductivity of chromium is second only to copper and is 40% higher than that of cast iron. Disadvantages of Chrome Plating: The deposition efficiency of the chrome plating layer is low, resulting in low productivity. The lubrication performance of the chrome plating layer is poor, leading to reduced wear resistance under conditions of insufficient lubrication. However, using porous chrome plating can improve wear resistance by 2-4 times. If not properly controlled, the chrome layer is prone to cracking and peeling.
8
4
Share

Where is the crankcase ventilation valve located on the Chery Tiggo 3?

The crankcase ventilation valve of the Chery Tiggo 3 is located on the valve cover. Below is the removal method for the Chery Tiggo 3 crankshaft position sensor: 1. During removal, disconnect the sensor wiring harness from the main wiring harness near the rear of the intake manifold. 2. Remove the nut securing the crankshaft position sensor wire clamp on the fuel pipe mounting bolt, then remove the crankshaft position sensor mounting bolt. 3. Remove the crankshaft position sensor and the clamp for the crankshaft position sensor wiring harness. 4. During installation, insert the protrusion of the crankshaft position sensor into the hole in the transmission housing until the end face is flush. 5. Install and tighten the two mounting bolts of the crankshaft position sensor with a torque of 17-21 N·m. The two bolts used to secure the crankshaft position sensor to the transmission are specially designed to ensure the correct gap between the sensor and the flywheel. Do not substitute other bolts for the specially designed ones. 6. Connect the wiring harness plug to the crankshaft position sensor, install the sensor wiring harness clamp, attach the clamp to the fuel pipe mounting bolt, and tighten the clamp mounting nut.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.