What are the penalties for entering Beijing without a Beijing Entry Permit?

2 Answers
StephanieAnn
07/23/25 11:22pm
Driving within restricted roads without a Beijing Entry Permit will result in a fine and 3 penalty points. Below are the specific details about the Beijing Entry Permit: 1. Validity of the Beijing Entry Permit: Non-local vehicles entering within the 6th Ring Road of Beijing (excluding the main road of the 6th Ring Road) require this entry permit, which is valid for 7 days, or 3 days during special periods (such as the Olympics or National Day holidays). Failure to comply will result in a 3-point deduction and a fine. Entry permit offices are available on highways and national roads leading into Beijing. 2. Required documents for application: To apply for a Beijing Entry Permit, you need to provide the vehicle’s valid registration certificate, a green environmental compliance label or a vehicle exhaust inspection certificate issued by the local municipal environmental department, compulsory traffic insurance label, inspection compliance label, as well as the driver’s license, ID card (or household registration booklet), and other valid documents.
Was this review help?
5
1
Share
Emersyn
08/10/25 7:19pm
Last time I drove to Beijing without a Beijing Entry Permit and got caught by the traffic police. They said that according to current regulations, out-of-town vehicles entering Beijing without a permit would be fined 100 yuan and have 3 points deducted from the driver's license. I was really anxious at the time because it took two hours to handle the situation and delayed my trip. What's worse, if similar mistakes are made multiple times, the fine may double, and the vehicle could even be impounded for a few days. After that, I learned my lesson and now always apply for the permit in advance using the Beijing Traffic Police App, which is much more convenient. Everyone, remember to apply for the permit at least three days before entering Beijing to avoid ending up like me. To be honest, paying the fine promptly after being penalized won't affect the annual inspection, but it's important to learn the lesson and not repeat the mistake.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

Are the reference points the same for left and right reverse parking?

No, they are different. Below is extended information about left and right reverse parking: Right reverse parking: Observe the positional relationship between the left rearview mirror and the parking line. First turn the steering wheel half a turn to the right and start moving, then turn the steering wheel fully to the right when the left rearview mirror covers the parking line. While reversing with the steering wheel fully turned to the right, look at the right rearview mirror. Observe the distance between the car body and the right front corner of the parking space, keeping this distance at 30 centimeters. Once half of the car body has entered the parking space, observe the relationship between the car body and the side lines through the left and right rearview mirrors. When the car body is parallel to the side lines, straighten the steering wheel. When the left rearview mirror covers the side line, immediately press the clutch and stop. Left reverse parking: Observe the position of the left rearview mirror and the parking line, and turn the steering wheel fully to the left when there is still a small distance between the left rearview mirror and the parking line. Through the left rearview mirror, observe the position of the car body and the left corner of the parking space to predict whether the car body will cross the line. After the car enters the parking space, observe the left and right rearview mirrors, and straighten the steering wheel when the car body is about to be parallel. When the left rearview mirror covers the side line, you can stop the car.
14
1
Share

How to Fix the Lifted Edges of Full Coverage Car Mats?

If the original car has fixing clips, then the full coverage leather mats will have corresponding clip designs to match the full coverage mat clips. Below is relevant information about full coverage car mats: 1. Background Introduction: Full coverage car mats, developed on the basis of full coverage, are the most popular type of car mats currently. The most popular full coverage mats on the market are mainly divided into two types: full coverage carpet mats and full coverage leather mats. Full coverage mats are designed with high-sided, three-dimensional specifications tailored to different car models, providing protection for the car's carpet and 360° non-slip coverage. 2. Cleaning: Daily cleaning only requires wiping with a damp cloth. They can also be rinsed with water and then air-dried, or cleaned with leather mat cleaning agents. However, it is not recommended to wash them with water as this can accelerate the aging of the mats. If they are not used for a long time, you can apply a specialized leather care wax to the full coverage leather mats. Cleaning these mats is relatively simple. First, take them out and remove any gravel, mud, or other debris inside. Then, rinse them directly with water, scrub them with a brush a few times, rinse again, shake off excess water, and place them in a dry, ventilated area to air dry before reinstalling them in the car.
3
4
Share

Why Does a Truck's Steering Feel Unstable and Sway from Side to Side?

There are many reasons why a truck's steering may feel unstable and sway up and down, including issues with the steering gear, abnormal tire pressure, incorrect wheel alignment, or damaged shock absorbers. A detailed analysis is as follows: 1. Steering gear malfunction: When there is a problem with the vehicle's steering gear, the truck may experience unstable steering, veering to one side, difficulty turning, or even an inability to steer. There are numerous potential causes for steering gear malfunctions, and it is advisable to seek professional inspection and repair at a service center or 4S shop. 2. Abnormal tire pressure: If the tire pressure is uneven on both sides of the vehicle, the truck will tend to veer toward the side with lower tire pressure. In such cases, it is essential to stop immediately, inspect the tires, and proceed with repairs or replacements as needed. 3. Incorrect wheel alignment: If the truck's wheels are not properly aligned after tire replacement, the tires may become unbalanced, affecting the vehicle's handling. In this situation, a complete wheel alignment should be performed, and the tires' dynamic balance should be checked. 4. Damaged shock absorbers: When the truck's shock absorbers are damaged or there are issues with the ball joints, it can often lead to steering instability and veering problems.
8
3
Share

What is the break-in period for the Audi Q5 in kilometers?

1. Avoid emergency braking: Emergency braking not only harms the braking system during the break-in period but also increases the impact on the engine and transmission. 2. Do not drive at high speeds: Drivers who floor the accelerator should note that the engine has limited capacity; do not overload it. Try to keep the engine RPM steady below 3,000r/min. 3. Do not overload the vehicle: Overloading makes steering heavier, increases centrifugal force, and affects the vehicle's handling performance. Long-term overloading also shortens the car's lifespan and accelerates the aging of components. Keep the total weight of the vehicle and cargo within 70% of the rated load capacity. 4. Use high-quality fuel: There are many types of fuel on the market; choose fuel that meets national standards. Non-standard fuel can clog the fuel tank and lines. 5. Preheat the engine during cold starts: Preheating the car: first, it ensures smooth engine startup; second, it effectively saves fuel; third, it reduces wear on moving parts. 6. Use the appropriate gear: Manual transmission drivers, please note that gears and RPM should match. Remember: high speed requires high gear, and deceleration requires low gear.
13
1
Share

How Many Cylinders Does the Chevrolet Malibu XL Have?

Chevrolet Malibu XL is equipped with a 1.5T four-cylinder turbocharged engine. The Chevrolet Malibu XL features a 1.5T four-cylinder turbocharged engine, delivering a maximum output of 170 horsepower and a peak torque of 252 Nm, paired with a 9-speed automatic transmission. Meanwhile, the 2.0T engine maintains its unchanged power parameters and continues to be available. Here are some details about the Chevrolet Malibu: 1. Vehicle Design: The Malibu's interior adopts General Motors' commonly used wraparound design, with a dual-layer layout that gives the center console a strong sense of hierarchy. The Chevrolet Malibu comes with a 7-inch central LCD touchscreen. It includes a single-disc CD player supporting MP3 and WMA formats, along with a USB port. Higher-end models feature an intelligent navigation system (with built-in 5G multimedia storage, voice control, single-disc DVD player, and support for MP3/WMA/iPod/CD). 2. Production Plan: The SAIC-GM Chevrolet Malibu went into production at the end of 2011 and was launched in early 2012. It is understood that the initial models released were equipped with 2.0L and 2.4L engines, and did not adopt the "1.6T+6MT" powertrain combination.
9
2
Share

What is the working principle of the Accord hybrid engine?

The working principle of the Accord hybrid engine is as follows: 1. Electric mode: The motor obtains energy from the lithium battery pack and drives the vehicle alone. The maximum speed is 60 mph, and the maximum driving range is not high. 2. Hybrid mode: The Accord hybrid works similarly to the Chevrolet Volt. The 2.0-liter gasoline engine drives the generator to produce electricity, which is then used for the motor. 3. Hybrid mode: In this mode, the motor is decoupled from the transmission system. The following is relevant information about the Accord: 1. Accord: As a practitioner of Honda's innovative spirit and global leading technology, the Accord has a global history of 38 years. The original tires of the Accord are Michelin's ultra-high-performance Pilot Super Sport tires. On April 16, 2018, the all-new Honda Accord, the tenth-generation Honda Accord, was officially launched in China. 2. Model information: As the embodiment of Honda's "innovative" spirit and global leading technology, the Accord (Accord) continues to create new value and has won the trust of 19 million users worldwide. In 1999, the sixth-generation Accord entered China, introducing the world's latest and most advanced models to the Chinese automobile market for the first time. Over the 15 years since entering China, the Accord has consistently adhered to vertical replacement and continuous evolution, winning the trust of more than 1.5 million Chinese car owners.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.