What are the penalties for driving in the wrong direction on highways in 2021?

How to reset the tire pressure light on a Lexus ES250?

The method to reset the tire pressure light on a Lexus ES250 is as follows: inflate the tires to the correct pressure, turn on the ignition, press the SET button for three seconds, and then turn off the power. The Lexus ES250 is a mid-to-large-sized 4-door, 5-seater sedan with body dimensions of 4915mm in length, 1820mm in width, and 1450mm in height, with a wheelbase of 2820mm. The Lexus ES250 is equipped with a 2.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 235 Nm. It features front-wheel drive, with a front suspension using a MacPherson strut independent suspension and a rear suspension using an independent double-wishbone MacPherson strut with a stabilizer bar.

2

1

Share

What do the S and L gears in an automatic transmission car mean?

In an automatic transmission car, the S gear stands for Sport mode, while the L gear represents Low gear. When using the S gear, the shift points occur at higher RPMs compared to normal mode, resulting in more aggressive power delivery, greater torque output, and improved acceleration. The L gear is primarily used when descending long slopes, as it allows the engine to assist in braking during downhill driving. It also helps maximize engine torque when climbing steep inclines. The steps to start an automatic transmission car are as follows: 1. Sit in the driver's seat and press the start button; 2. Depress the brake pedal and press the start button to ignite the engine; 3. Release the foot brake and allow the car to warm up; 4. Depress the brake again and shift into D (Drive) gear; 5. Release the parking brake and gradually lift your foot off the brake pedal to start moving.

12

4

Share

Can ETC be installed in the black dotted area on the car?

ETC can be installed in the black dotted area on the car. ETC is an electronic toll collection system, also known as an automatic road toll system, commonly seen on highways, bridges or tunnels with toll policies, and some sections of city centers. Precautions for using ETC include: 1. Maintain a distance of more than 10 meters from the vehicle in front to prevent automatic sensing from charging the wrong vehicle; 2. When using a debit card to bind ETC, insufficient balance will also cause the toll deduction to fail; 3. The recognition speed for ETC lanes is 20 kilometers per hour, and if the speed is too fast, the vehicle device information cannot be read, leading to toll deduction failure.

16

5

Share

What is the fuel tank capacity of the Emgrand GS?

The fuel tank capacity of the Emgrand GS is 55 liters. The Emgrand GS is a compact 5-door, 5-seat SUV with body dimensions of: length 4440mm, width 1833mm, height 1573mm, and a wheelbase of 2700mm. It comes with 215/50R17 tires. The Emgrand GS is equipped with a 1.4T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 104 kW at 5200 rpm and a maximum torque of 235 Nm between 1600 to 4000 rpm. It features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.

7

4

Share

What lights should be used when passing through an intersection at night in Subject 3?

When driving straight through an intersection at night in Subject 3, alternately use the high and low beams at least twice. When driving a motor vehicle in weather with excessively low visibility such as heavy fog or extremely dense fog, first move the vehicle to a safe roadside area or parking lot, and wait until visibility improves before continuing to drive. Additionally, when encountering heavy fog, snow, or heavy rain that obstructs visibility, low beams must be turned on even during the day. Introduction to Subject 3: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviated name for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies depending on the type of vehicle being licensed for.

11

4

Share

What lights should be used when passing sharp turns at night?

When a motor vehicle passes sharp turns, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, it should alternately use high and low beam lights to signal. When a motor vehicle is driving at night with no street lights, poor lighting, or in low visibility conditions such as fog, rain, snow, dust, or hail, it should turn on the headlights, clearance lights, and tail lights, but high beam lights should not be used when following another vehicle. Motor vehicles driving in foggy conditions should turn on fog lights and hazard warning flashers. The fog light control lever is usually located below the left side of the steering wheel, with a length similar to the radius of the steering wheel, making it easy to operate while holding the steering wheel. It can control the switching between high and low beams, left and right turn signals, the turning on and off of lights, and the activation and deactivation of front and rear fog lights.

5

3

Share

What are the penalties for driving in the wrong direction on highways in 2021?

How to reset the tire pressure light on a Lexus ES250?

What do the S and L gears in an automatic transmission car mean?

Can ETC be installed in the black dotted area on the car?

What is the fuel tank capacity of the Emgrand GS?

What lights should be used when passing through an intersection at night in Subject 3?

What lights should be used when passing sharp turns at night?

Do Hybrid Vehicles Need Charging?

How to reset the tire pressure light on a Golf?

What are the reasons for no response when pressing the one-button start?

What is the Difference Between Mineral Oil and Synthetic Oil?