What are the penalties for driving a motor vehicle 50% over the speed limit on the road?

1 Answers
DelMichael
07/29/25 5:47pm
The type of penalty is determined based on the percentage by which the speed limit is exceeded. If the speed limit is between 50 km/h and 80 km/h and the vehicle exceeds the speed limit by more than 50% but less than 70%, a fine of 500 yuan will be imposed. According to relevant regulations, if a motor vehicle violates the speed limit while driving on the road, the penalties are as follows: 1. Type 1: If the speed exceeds the speed limit by less than 10%, a warning will be issued. 2. Type 2: On roads with a speed limit below 50 km/h, if the speed exceeds the speed limit by more than 10% but less than 20%, a fine of 50 yuan will be imposed; if it exceeds the speed limit by more than 20% but less than 50%, a fine of 100 yuan will be imposed; if it exceeds the speed limit by more than 50% but less than 70%, a fine of 300 yuan will be imposed; if it exceeds the speed limit by 70% or more, a fine of 500 yuan will be imposed. 3. Type 3: On roads with a speed limit between 50 km/h and 80 km/h, if the speed exceeds the speed limit by more than 10% but less than 20%, a fine of 100 yuan will be imposed.
Was this review help?
16
3
Share
More Forum Discussions

Does the Chevrolet Cruze Hatchback have cruise control?

Chevrolet Cruze Hatchback high-end models come with cruise control, while the low-end versions do not. Press the button with the circular symbol to activate cruise control. Cruise control should be used on highways or fully enclosed roads, as complex road conditions on non-enclosed roads are not conducive to traffic safety. The operation methods of cruise control are as follows: 1. To set the cruise speed, press the cruise control lever in the direction indicated by SET; 2. To increase the cruise speed, lift the cruise control lever upwards without stepping on the accelerator pedal; 3. To decrease the cruise speed, press the cruise control lever button downwards.
3
4
Share

What are the reasons for the electronic brake warning light staying on?

There are two main reasons why a car's brake warning light stays on: severely worn brake pads and low brake fluid level. Here are the detailed explanations: 1. Severely worn brake pads: Brake pads come in two types - those with wear sensors and those without. For pads equipped with wear sensors, when the brake pad wears down to its limit, the sensor automatically completes an electrical circuit, triggering the warning light. 2. Low brake fluid level: Brake fluid plays a crucial role in a vehicle's braking system. When the driver presses the brake pedal, the force applied is transmitted by the master cylinder piston through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle.
17
2
Share

What causes engine weakness?

Engine weakness can be attributed to the following reasons: 1. Severe carbon deposits in the engine: Excessive carbon buildup can cause the fuel injected by the cold start injector to be largely absorbed by the carbon deposits, resulting in insufficient fuel entering the cylinders and causing the engine to shake and lose power. When there is too much carbon buildup inside the engine, the car's ignition energy decreases, and the intake efficiency drops, ultimately leading to reduced engine power. 2. Increased electrode gap in the spark plug: A larger electrode gap can affect the spark plug's ignition energy, causing it to decrease. Reduced ignition energy can result in incomplete combustion of the combustible mixture in the engine, which in turn affects the engine's performance, leading to decreased power and increased fuel consumption.
1
3
Share

Do new cars still have environmental protection labels now?

New cars do have environmental protection labels, but as of January 1, 2017, the environmental protection department has ceased issuing the motor vehicle environmental protection inspection qualification labels. The environmental protection inspection qualification label has been abolished, and only the motor vehicle inspection qualification label and compulsory insurance label need to be affixed to the front windshield of the vehicle. According to national regulations, the motor vehicle emission inspection system has been established and standardized. Motor vehicle manufacturers and owners must conduct emission inspections in accordance with the law. Emission inspection agencies must strictly implement the motor vehicle emission inspection standards, upload the emission inspection data and electronic inspection reports to the environmental protection department, and issue emission inspection reports with unified codes from the environmental protection department. For vehicles that fail the periodic emission inspection, no safety technical inspection qualification certificate will be issued.
14
2
Share

What is Engine Torque Limitation?

Generally, engine torque limitation is implemented to prevent excessive pollutants in the exhaust. The reasons for engine torque limitation are as follows: 1. Reason one: Failure of the urea pump. 2. Reason two: Malfunction of the urea nozzle. 3. Reason three: Aging of the speed limiter. Relevant information about automotive engines is as follows: 1. Automotive engine: It is the device that provides power for the vehicle, serving as the heart of the car, determining its power, fuel efficiency, stability, and environmental friendliness. 2. Classification: Based on the power source, automotive engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid power systems, among others.
10
2
Share

Is Roewe a Domestic or Joint Venture Brand?

Roewe is a domestic brand. Below is a detailed introduction to Roewe: 1. Roewe is an automobile brand under Shanghai Automotive Industry Corporation (Group), launched in October 2006, with the meaning "Innovation Honors, Dignity Across the World". 2. Since its establishment, the company has developed five vehicle platforms, with dozens of products successfully launched in the market, covering a wide range of fields including mid-to-high-end cars, popular models, and SUVs. It has established a good brand image and formed a broad series product line layout that keeps pace with international automotive technology trends, covering all segments of the mainstream passenger car market. 3. Roewe brand products include: Roewe 950, Roewe 750, Roewe 550, Roewe 350, and Roewe W5.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.