What are the penalties for carrying 11 people in a 7-seater vehicle?

2 Answers
EmersynAnn
07/29/25 10:17am
A 7-seater vehicle carrying 11 people constitutes an 80% overload, which will result in a fine and 6 penalty points. Overloaded vehicles bear loads far exceeding the design capacity of roads and bridges, leading to pavement damage and bridge fractures. Increased mass leads to greater inertia, longer braking distances, and higher risks. Vehicles are manufactured based on predetermined technical specifications, including load limits. Overloading alters these original design parameters.
Was this review help?
16
0
Share
OIsabella
08/13/25 1:43pm
Last time, my family and I went out for fun in a 7-seater car. To save trouble, we squeezed in 11 people, but ended up being stopped by traffic police for inspection. We were fined 2000 yuan directly and had 6 points deducted from the license. The car was also warned to be temporarily impounded, which was really scary. The police explained that overloading by more than 40% is very dangerous, as it makes the vehicle's center of gravity unstable and increases the braking distance. In case of an accident, the insurance might refuse to pay, leaving the whole family regretting it deeply. Overloading is not only illegal but also risking lives. It is advised to count the number of passengers clearly and avoid overcrowding. Before setting off, check everything to ensure safety first, so as not to face penalties or live in fear. Although the fine is high, the safety risks are even more terrifying. We all need to learn a lesson and follow the rules.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What is the reason for the buzzing noise when driving a Peugeot 3008?

The reason for the buzzing noise when driving a Peugeot 3008 is a faulty front wheel half-shaft. The Peugeot 3008 is a compact SUV. Taking the 2019 Peugeot 3008 as an example, its body dimensions are: length 4435mm, width 1840mm, height 1652mm, with a wheelbase of 2613mm. The 2019 Peugeot 3008 is equipped with a 1.6T turbocharged engine, with a maximum horsepower of 167PS, maximum torque of 245Nm, maximum power of 123kW, and is paired with a 6-speed manual/automatic transmission.
14
3
Share

How to align the timing belt on a Roewe 550?

Roewe 550 timing belt alignment method is: Use a wheel block to secure the timing wheel of the engine to prevent the wheel from turning during chain tooth alignment; Locate the blue timing chain tooth on the engine camshaft; Align the colored chain on the engine with the small dot on the camshaft; After marking, use a wrench to clamp the timing shaft so that the marked chain tooth can be secured; Release the clip holding the engine timing wheel, and the timing alignment is complete. Taking the 2014 manual Zhi Xuan edition Roewe 550 as an example, its body dimensions are: length 4648mm, width 1827mm, height 1483mm, with a wheelbase of 2750mm.
12
2
Share

What is the difference between BYD Tang DM and DMI?

The differences between BYD Tang DM and DMI are: 1. Different powertrains: BYD Tang DM is equipped with a 2.0T plug-in hybrid system, while BYD Tang DMI is equipped with a 1.5T plug-in hybrid system. 2. Different motors: BYD Tang DM uses ternary lithium batteries, while BYD Tang DMI uses lithium iron phosphate batteries. Taking the 2021 BYD Tang as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 2.0L turbocharged engine with a maximum horsepower of 230PS, a maximum torque of 350Nm, and a maximum power of 169kW, paired with a 6-speed automatic transmission.
5
3
Share

What Causes Transmission Shaking?

Transmission shaking can be caused by: 1. Excessive carbon buildup; 2. Dirty throttle body or air filter; 3. Faulty spark plugs; 4. Aging engine components. The functions of a transmission are: 1. To change the gear ratio to meet different driving conditions' traction requirements; 2. To enable reverse driving; 3. To interrupt power transmission to the drive wheels during engine start, idle operation, gear shifting, or when power output is needed while parking. Transmission maintenance methods include: 1. Regularly checking the fluid level; 2. Avoiding skipping gears when upshifting; 3. Not forcing the transmission into neutral; 4. Not shortening the idle warm-up time; 5. Avoiding gear grinding when shifting.
6
3
Share

What is the use of ECU?

ECU (Electronic-Control-Unit) is an electronic control unit, also known as the "on-board computer" or "vehicle computer". In terms of its purpose, it serves as a dedicated microcomputer controller for automobiles. Below is relevant information about ECU: 1. The main component of ECU is a microcomputer, with the CPU being its core element. The ECU converts input signals into digital form, processes them by comparing with stored reference data, calculates output values, and then amplifies the output signals to control various regulating servo components such as relays and switches. 2. Essentially, an ECU is an "Electronic Control Unit", composed of three parts: an input circuit, a microcomputer, and an output circuit. The input circuit receives signals from sensors and other devices, filters, processes, and amplifies these signals, then converts them into input levels of specific voltages.
9
5
Share

What does 2.0gdit mean?

2.0gdit means: 2.0 represents the displacement, and gdit stands for turbocharged direct injection engine. The function of the engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work. The maintenance methods for the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly clean the carbon deposits in the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable speed. The components of the engine include: the engine block, the crankshaft and connecting rod mechanism, the valve train and intake/exhaust system, the fuel supply system and governor, the starting device, the cooling system, and the lubrication system.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.