What are the penalties for a private 7-seater vehicle carrying 9 people?

1 Answers
SanEmmanuel
07/29/25 9:27pm
Private 7-seater vehicles carrying 9 people will be penalized with 6 demerit points and a fine. Below is a partial introduction to the penalties for private 7-seater vehicles carrying 9 people: 1. Legal provisions: Article 49 of the 'Road Traffic Safety Law of the People's Republic of China' states that motor vehicles must not carry more than the approved number of passengers, and passenger vehicles must not carry goods in violation of regulations. 2. Demerit point management: The cumulative demerit point cycle (i.e., the scoring cycle) for road traffic safety violations is 12 months, with a full score of 12 points, calculated from the date the motor vehicle driver's license is first obtained. Based on the severity of the road traffic safety violation, the points deducted at one time are divided into five types: 12 points, 6 points, 3 points, 2 points, and 1 point.
Was this review help?
20
5
Share
More Forum Discussions

What does 'snow' on the dashboard mean?

The 'snow' on the dashboard refers to the snow driving mode. Driving modes: Generally, there are several driving modes to choose from, such as sport mode, ECO mode, off-road mode, snow mode, and standard comfort mode. It is recommended to select the ECO mode, also known as the economy mode, which will definitely result in lower fuel consumption. If you want to save fuel, it is important to pay attention to your driving style, choose smooth roads, and use the ECO economy mode. Snow mode: This mode is suitable for icy and snowy road conditions, improving traction for straight-line driving and enhancing grip for cornering. In snow mode, the vehicle will start in second gear. To avoid wheel spin, second gear is used for starting. The ABS system will be more sensitive; normally, it only intervenes when braking hard, but in this mode, it will also activate in non-emergency situations.
11
2
Share

What is the best position to install ETC in a car?

For small cars, the ETC is generally installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have it installed later, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the vehicle owner needs to provide original and photocopies of their valid ID card and vehicle registration certificate. If the application is made by a non-owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not block the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle for the windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the right side of the rearview mirror can help avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues with the ETC device of the vehicle in front, maintain a distance of more than 10 meters to avoid automatic toll payment for the preceding vehicle. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information and cause toll deduction failure. When using a debit card linked to ETC, insufficient balance may also lead to toll deduction failure.
15
1
Share

How Many Kilometers Can 30 Liters of Gasoline Drive?

30 liters of gasoline can approximately drive about 300 kilometers. Introduction to Fuel Consumption: Fuel consumption generally refers to the amount of gasoline consumed by a car per 100 kilometers driven, which is a theoretical indicator of the vehicle. Methods to Reduce Fuel Consumption: The longer the idling time when parked, the greater the fuel consumption, so try to minimize idling time; and avoid rapid acceleration, slamming the gas pedal, and driving at lower engine speeds. Factors Affecting Fuel Consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, can all affect a car's fuel consumption.
3
2
Share

What does non-motorized vehicle lane mean?

Non-motorized vehicle lane is a road dedicated for non-motorized vehicles. Non-motorized vehicle lane: Non-motorized vehicle lane refers to the lane between the carriageway and sidewalk on highways or urban roads, demarcated by vehicle lane markings or separation belts. On various urban roads in China, there is significant non-motorized vehicle traffic, with bicycles and electric vehicles being the most prominent. The design of non-motorized vehicle lanes in Chinese urban roads generally uses bicycles as the design vehicle type. Motor vehicle lane: Motor vehicle lane refers to the lane between the first vehicle lane marking on the right side and the center line on the carriageway of highways or urban roads, which is exclusively for motor vehicle traffic except under special circumstances.
10
4
Share

What is the equivalent speed of a motorcycle at 80 compared to a car?

A motorcycle's speed of 80 is equivalent to a car's speed of 80. If the accuracy of the speedometer is not considered, the actual speeds are the same. Definition of speeding: Driving at 45 mph on a road with a speed limit of 40 km/h falls within the range of exceeding the prescribed speed by more than 10% but less than 20%. According to the new traffic regulations, for violations where the speed exceeds the prescribed limit by less than 50% on a road with a speed limit of 40 km/h, the traffic police will only issue a warning without imposing a fine or deducting points. Precautions for driving: When driving, it is necessary to observe the speed limit indicated by roadside signs, markings, and other indicators. Additionally, always monitor the speedometer on your vehicle's dashboard to avoid committing speeding violations.
5
2
Share

What are the significances of Ford's assembly line production?

Ford's assembly line production has significant conveying capacity, long transportation distance, and can also complete several process operations simultaneously during the conveying process. Introduction to assembly lines: Production assembly lines are continuous conveying machinery for goods transportation on certain routes, also known as conveying lines or conveyors. According to the series of conveying products, they can be roughly divided into five types: plate chain lines, multiple chain lines, plug-in lines, mesh belt lines, and suspension lines. Generally, they include traction parts, load-bearing components, driving devices, tensioning devices, redirecting devices, and supporting parts. Assembly lines have large conveying capacity and long transportation distance, and can also complete several process operations simultaneously during the conveying process, so they are widely used. Ford Motor Company: Henry Ford founded Ford Motor Company in 1903. In 1908, the company produced the world's first Model T car. In 1913, the company developed the world's first assembly line, creating a world record that remains unbroken to this day.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.