What are the penalties for a motor vehicle crossing solid lines?

1 Answers
ErinLynn
07/29/25 1:41pm
Vehicles randomly changing lanes or crossing solid lines at traffic light intersections are highly likely to cause minor road traffic accidents. If caught by electronic surveillance, a fine may be imposed along with a penalty of three demerit points. If the driver fails to pay attention to the road traffic markings and the vehicle crosses the yellow line for oncoming traffic, a fine may be imposed along with three demerit points.
Was this review help?
16
4
Share
More Forum Discussions

Does Using the Fan with the Engine Off Drain the Car Battery?

Yes, it drains the battery. When using the fan with the engine off, the alternator is not working, so the battery will deplete relatively quickly. If the fan speed is set to a lower level, it can be used temporarily for a while. However, if the battery is accidentally drained, the car won't start. More details are as follows: 1. Avoid using high-power electrical devices when the engine is off: This helps protect the battery. If the battery is accidentally drained and the car won't start, you can use jumper cables to start the vehicle. It's important to connect the cables correctly to avoid short circuits. When connecting the batteries of two cars with jumper cables, the correct method is to connect positive to positive and negative to negative. Car batteries generally have low voltage and won't pose an electric shock hazard. Properly jump-starting the car won't cause any damage. 2. If the positive and negative terminals are connected incorrectly: Starting the car may cause both batteries to burn out. When starting the powered vehicle, do not disconnect the jumper cables or the batteries of both cars. After ensuring the batteries are correctly connected, start the powered vehicle while turning off all electrical devices in the dead car. Wait a while before starting the dead car, and let it idle for a bit after starting before disconnecting the cables.
11
5
Share

Where to File a Complaint If There Are Issues with the Car?

If there are issues with the car, you can file a complaint with the 4S store or the manufacturer. If the issue remains unresolved, you can then complain to the Consumer Association or the relevant administrative departments, or you may also submit the case to an arbitration institution for arbitration. The specific details are as follows: 1. Negotiate with the dealer to resolve the issue: When encountering car quality problems, negotiating with the dealer is the most direct and commonly used method. According to the car "Three Guarantees" policy, if there are quality issues with the vehicle during the warranty period, you are entitled to free vehicle repair services; if the car breaks down on the road and cannot continue to drive, the 4S store is required to send someone to the site for repairs. In cases where towing fees are incurred or the repair time exceeds 5 days, the 4S store should also provide relevant compensation. 2. Collect some evidence in advance: When negotiating with the manufacturer and the dealer, you can collect some evidence in advance to clearly explain the reasons why the car cannot be used normally and to listen to each other's opinions and ideas. The advantage of negotiation is that it does not require high lawyer fees, expert fees, or inspection fees, nor does it involve the hassle of running back and forth between administrative agencies or courts. Therefore, it is recommended that both parties in dispute prioritize resolving the issue through negotiation.
4
5
Share

What are the effects on the engine after it overheats?

Engine overheating mainly occurs due to issues in the engine cooling system. For example, malfunctions in components such as the water temperature sensor, radiator, water pump, or fan can lead to the "overheating" phenomenon. More detailed information is as follows: 1. Consequences of engine overheating: In mild cases, it can cause deformation of the cylinder head and cylinder gasket, while in severe cases, it can lead to deformation of internal engine parts or even engine failure. 2. Consequences of delayed action: If the excessive heat is not dissipated promptly and high-load driving continues, the strength of components like the piston, piston rings, and connecting rod can decrease, or they may even deform. The engine will no longer be able to handle normal loads, and the normal gaps between parts will be disrupted, preventing the formation of proper oil films. In mild cases, this can cause cylinder scuffing or bearing seizure, while in severe cases, it can result in complete engine damage or failure.
11
4
Share

Why does the car make a clicking sound when starting at low speed?

When the car makes a clicking sound while accelerating at low speeds, it may be coming from the transmission. For manual transmission models, the possible causes of the abnormal sound include incomplete clutch disengagement, the presence of gear debris causing collisions between gears, or damaged gears. For automatic transmission models, the issue might lie with the gear set, which requires immediate repair. The reasons for the clicking sound during low-speed starts are as follows: 1. Transmission oil operating in high-temperature and high-pressure environments can produce a lot of sludge and impurities: This thickens the transmission oil, reducing its fluidity and causing direct friction between components without a protective layer, thereby increasing mechanical wear and leading to abnormal sounds. 2. Transmission oil needs replacement: Automatic transmission oil is generally replaced every 2 years or 40,000 kilometers, while manual transmission oil is serviced every 3 years or over 60,000 kilometers. For repaired transmissions, it is strongly recommended to perform the first maintenance at 3,000 kilometers, followed by replacement every year or 20,000 kilometers.
14
5
Share

How to reattach a fallen interior rearview mirror?

You can use strong double-sided tape, specifically designed for rearview mirrors. Simply peel off the protective paper on both sides, but make sure to scrape off any residual adhesive from the mirror. Additional solutions include: 1. AB adhesive: This type of adhesive comes in two parts (A and B) that need to be mixed before use. However, some AB adhesives take longer to cure, requiring patience for full solidification. 2. UV adhesive: Also known as invisible glue, it bonds plastic and metal perfectly. Since car windshields are made of glass and rearview mirrors often have metal parts, UV adhesive can solve this issue effectively. 3. Suction cup rearview mirror: This type doesn't require adhesive; it attaches to the glass via suction cups, making it very practical and convenient.
10
4
Share

What is a rain visor?

Rain visor is an accessory for vehicles. Below is relevant information about rain visors: 1. Function: Rain visors are attached to the side mirrors with double-sided tape. During rainy weather, they effectively prevent rainwater from splashing or flowing onto the mirrors, ensuring drivers always have a clear view. 2. Benefits: The formal name for rain visors is 'sun and rain deflectors'. Their greatest advantage is allowing windows to be slightly lowered during rain without letting water drip inside. Additionally, they create a small gap between the window and roof, which also serves a ventilation purpose.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.