What are the peak and off seasons for car buying?

What are the symptoms of a faulty car PVC valve?

When the problem occurs, after starting the motor vehicle, it will experience shaking. The idle speed will be either too high or too low. A large amount of white smoke will appear from the vehicle's tailpipe. There will be insufficient power when the vehicle is in motion. The fuel consumption of the motor vehicle will increase. Specific details are as follows: Once the motor vehicle experiences these issues, it must be repaired. Otherwise, it will affect the use of the motor vehicle, because any problem with the motor vehicle indicates a fault. If not repaired in time, the problem will worsen, affecting the normal use of the motor vehicle.

12

2

Share

Should the AC be turned on for cold air?

Automobile air conditioning AC activates the air conditioning compressor. To cool the air, you need to press the AC button. When the AC button is pressed, the air conditioning compressor starts working, cooling the hot and stuffy air in summer. The maintenance methods for automobile air conditioning are as follows: 1. Comprehensive inspection of the air conditioning system: When using the air conditioning for the first time in summer, first check the air conditioning system, such as checking the refrigerant and whether the air filter is too dirty through the liquid storage tank, and whether there are foreign objects on the radiator. 2. Pay attention to the cleaning of the air conditioning: The air filter should be replaced regularly, because there is a lot of dust and willow catkins in spring, which will stick to the filter and easily breed bacteria, causing a musty smell in the air conditioning. In addition, the condenser should also be cleaned regularly, and the water tank should be removed for thorough cleaning. 3. Regularly turn on high fan speed: The air conditioning will suck in a lot of dust during use. Regularly turning on high fan speed can blow out the dust on the inner surface of the air conditioning ducts, which is a simple way to keep the air conditioning clean. In addition, special duct cleaning solutions should also be used for sterilization, cleaning, and odor removal.

4

1

Share

What is a car PVC valve?

Automotive PVC valve is a component in the Positive Crankcase Ventilation (PCV) system of a car engine, consisting of valve body, valve, valve cover, and spring. Below are relevant details about the automotive PVC valve: Composition: The PCV valve is made up of valve body, valve, valve cover, and spring, and is non-disassemblable. Function: It directs gases from the crankcase into the intake manifold via the PCV valve, with a small amount of air entering the intake manifold directly from the air filter through the PCV valve. This prevents throttle icing, incomplete combustion, and emission deterioration. It also prevents exhaust gases from entering the atmosphere and keeps engine oil from deteriorating.

5

Share

How to Switch Instant Fuel Consumption?

After entering the settings interface, the toggle button is used to switch or flip through information, and this process is unidirectional and sequential. Press the settings button briefly to enter the settings interface, which is used for time settings, English/Chinese language settings, factory reset, etc. Cycle through average fuel consumption, instant fuel consumption, etc., one by one in a unidirectional loop. When the steering wheel multiplexing is activated, you can also switch using the left and right buttons.

4

2

Share

What to Do If Driving Someone Else's Car Without a License and the Car Gets Impounded?

Driving a motor vehicle without a license will result in a fine and may also lead to detention for up to 15 days, as well as temporary impoundment of the vehicle. If the motor vehicle is unlicensed or has incomplete documentation, the necessary procedures must be completed or a fine paid before the vehicle can be retrieved.

18

0

Share

What to Do If Water Gets into the Engine Oil?

If water gets into the engine oil, it is necessary to drain all the oil and replace it with new oil. The main causes of water entering the engine oil are as follows: 1. Damage to the oil cooler causing water to enter the oil: If the pipes of the oil cooler break, external water can seep into the oil cooler, leading to water contamination in the oil. 2. Leakage from the engine water plug causing water to enter the oil: After several years of engine use, corrosion from scale can cause some water plugs to rust through, allowing coolant to enter the oil passages and drain into the oil pan. 3. Damage to the cylinder liner seal causing water to enter the oil: A damaged cylinder liner seal is a major cause of water entering the oil. Therefore, when diagnosing the cause of water in the oil, always check the condition of the cylinder liner seal. 4. Cracks in the cylinder liner leading to water entering the oil: When a heated cylinder liner comes into direct contact with coolant, cracks can form. Once cracks appear, coolant can enter the cylinder directly and seep into the oil pan through the cylinder walls, causing the oil to turn milky. This can result in poor engine combustion, white smoke, and other issues. 5. Damage to the cylinder head gasket causing water to enter the oil: If the cylinder head gasket is damaged and the coolant circulation is fast, water from the coolant passages can flow into the oil passages, contaminating the oil.

5

Share

What are the peak and off seasons for car buying?

What are the symptoms of a faulty car PVC valve?

Should the AC be turned on for cold air?

What is a car PVC valve?

How to Switch Instant Fuel Consumption?

What to Do If Driving Someone Else's Car Without a License and the Car Gets Impounded?

What to Do If Water Gets into the Engine Oil?

How to Open the Door with the Mondeo Mechanical Key?

What is the method to reset the maintenance light on the Changan Eado?

What to Do If Water Enters the Motorcycle Exhaust Pipe?

What is the tire size of the Nissan Sunny?