What are the payment methods for the Subject 3 make-up exam fee?

1 Answers
Donna
07/25/25 3:06pm
Subject 3 make-up exam fees can be paid at the traffic management office or through the official website of the Public Security Traffic Management Bureau. Generally, the make-up exam fee is uniformly set at 100 RMB per person for Subject 3, but the specific amount may vary by region. Related information: 1. Subject 3 make-up exam: The number of appointments for the Subject 3 road driving skills exam must not exceed 5 times. If the 5th appointment is still unsuccessful, the results of other previously passed subjects will be invalidated. 2. Free make-up exam: Each subject exam can be taken once with one free make-up exam. If the make-up exam is still unsuccessful, the exam for that subject will be terminated. The applicant can reapply for the exam, but the exam dates for Subject 2 and Subject 3 must be scheduled at least 20 days later.
Was this review help?
7
1
Share
More Forum Discussions

How to Add Antifreeze to the Encore?

To add antifreeze to the Encore, follow these steps: First, drain the old antifreeze and flush the channels with clean water. Wait approximately one hour for the water to drain completely. Then, pour the new antifreeze into the radiator through the water pipe. If there is air in the radiator, start the engine to expel the air before continuing to fill the radiator with antifreeze until it is full. The Encore is a compact SUV under SAIC-GM Buick, with dimensions of 4295mm in length, 1798mm in width, and 1616mm in height, and a wheelbase of 2570mm. The vehicle comes standard with electronic safety systems such as ESC (Electronic Stability Control), ROM (Roll Over Mitigation), HSA (Hill Start Assist), CBC (Cornering Brake Control), and TPMS (Tire Pressure Monitoring System).
2
4
Share

What Causes a Slight Delay in Car Startup?

Car startup delays can be caused by poor fuel quality, carbon buildup, or dirty components. Here are the specific reasons: Poor fuel quality: If your car suddenly starts normally but then experiences delayed startups, consider whether you've recently switched to gasoline with a different octane rating or from a different source. Carbon buildup or dirty components: Throttle body: Carbon deposits on the throttle body can affect the sensitivity of the throttle and air intake, causing delayed or incorrect signals from the ECU, which may prevent the car from starting. Fuel injectors: Fuel injectors can easily accumulate sticky deposits that obstruct normal fuel injection, leading to poor gasoline atomization. This causes delayed ignition and makes the car difficult to start. Spark plugs: Excessive carbon buildup on spark plugs or air leaks at the junction between the metal and ceramic parts can both result in poor ignition. If your car experiences slight startup delays, it's recommended to check the fuel octane rating and inspect for carbon buildup or dirty components, then visit a 4S shop for diagnosis and repairs.
15
1
Share

Can Cars Be Modified with Xenon Lights?

Directly replacing bulbs on the original vehicle is illegal, but installing only lenses is permissible. A bi-xenon lens combined with xenon lights will not affect oncoming traffic. Additional information: 1. Replacing halogen bulbs with xenon bulbs: Since the market has introduced xenon bulbs compatible with H7, H4, H3, H1, HB3, HB4, and other halogen bulbs, almost all vehicle models can use them. 2. Replacing the entire headlight assembly: This modification method primarily uses original xenon headlights, which combine xenon light sources with specially designed light distribution mirrors and reflectors, making it the most ideal modification approach. 3. Installing xenon auxiliary lights on the front or roof of the vehicle: This modification is relatively flexible. Users can select suitable products based on the vehicle's front styling and personal preferences, choose reasonable installation positions, and meet personalized needs. Xenon auxiliary lights are mainly used for high beams, with outer diameters ranging from as small as 80~90 mm to as large as 200 mm, suitable for different vehicle types such as trucks, off-road vehicles, and sedans.
18
5
Share

How to Use the Engine Start-Stop Function in the Excelle?

The usage method of the Excelle's engine start-stop system is as follows: The system is enabled by default after the engine starts. The switch is located next to the ignition switch or on the center console. Pressing the button can manually deactivate the automatic start-stop system. When the start-stop function is enabled, with the gear lever in D position and the brake pedal depressed, the system stops when the tachometer needle points to the AUTOSTOP position. The Excelle is a compact car under SAIC-GM, equipped with a 1.3T or 1.0T Ecotec dual-injection turbocharged engine. The Super Connected Edition model features Buick eConnect connectivity technology, a human-machine interface, and supports cloud-based connected applications and services.
20
0
Share

Can the Jetta steering tie rod assembly be replaced?

Jetta steering tie rod assembly can be replaced. The disassembly and installation steps are as follows: 1. Remove the dust cover of the car tie rod; 2. Remove the screw connecting the tie rod and the steering knuckle; 3. Remove the ball joint connecting the tie rod and the steering gear; 4. Install the new tie rod, compare it with the old one, and assemble it after confirming that the parts are the same; 5. Tighten the dust cover, you can apply glue to both ends of the dust cover and then secure it with zip ties; 6. After replacement, a four-wheel alignment must be performed to adjust the data within the normal range. Jetta is an automobile brand under FAW-Volkswagen Automotive Co., Ltd., with a length, width, and height of 4501mm, 1704mm, and 1469mm respectively, and a wheelbase of 2604mm.
19
2
Share

How to Reset the Tire Pressure Light on the Sagitar?

The method to reset the tire pressure light on the Sagitar is as follows: You can turn off the tire pressure indicator light by using the tire pressure reset button on the car's central console. This button is usually located near the gear shift lever. Press and hold the tire pressure monitoring switch for more than 3 seconds, and you will hear a corresponding prompt sound. At this point, the tire pressure warning light on the dashboard will turn off. The Sagitar is a model under FAW-Volkswagen, with body dimensions of 4544mm in length, 1760mm in width, and 1461mm in height, and a wheelbase of 2578mm. The car is equipped with LED high-performance composite taillights, halogen integrated headlights, a windshield with a sunshade area, green UV-protective and heat-insulating glass, a multifunctional electric sunroof, and exterior rearview mirrors with electric adjustment and heating functions.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.