What are the passing scores for Subject 1, Subject 2, Subject 3, and Subject 4?

2 Answers
DelClara
07/29/25 4:12am
The passing scores for Subject 1, Subject 2, Subject 3, and Subject 4 are 90 points, 80 points, 90 points, and 90 points respectively. Relevant information about the driver's license test is as follows: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can one obtain a driver's license and legally operate a motor vehicle. 2. Content: The content of the motor vehicle driver's test is divided into the road traffic safety laws, regulations, and related knowledge test (also known as the "theoretical test", referred to as "Subject 1"), the field driving skills test (commonly known as the "parking test", referred to as "Subject 2"), and the road driving skills and safe civilized driving common sense test (commonly known as the "road test", referred to as "Subject 3"). The test content and passing standards are unified nationwide, with corresponding test items specified according to different types of vehicles eligible for driving.
Was this review help?
2
1
Share
LaWillow
08/12/25 7:56am
I just got my driver's license last year. The first and fourth tests were theory-based, requiring a score of 90 to pass, with full marks being 100. The second test was the field exam, involving tasks like staying within the lines, and passing required only 80 points—with enough practice, it's totally manageable. The third test, the road test, also required 90 points to pass. Don't underestimate the importance of signaling and parallel parking; these details are where most points get deducted. Our instructor put it quite plainly: 'Test two depends on steady hands, test three on quick thinking, and for the theory tests, just run through the app a few more times.' After passing the third test, I went straight to the theory simulation room to review, which made taking the fourth test much easier with that preparation under my belt.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

How Many Times Can You Take the Driving License Subject 4 Exam?

There is no limit to the number of times you can take the Subject 4 exam for the driving license, but it must be passed within the 3-year validity period of the driving test. Subject 4 can only be taken after passing the Subject 3 road driving skills test. If you fail the exam, you can apply for a retake on the same day, and the previously passed road driving skills test results will still be valid. Notes on the driving license exam: After each subject is scheduled, you can take the exam once and retake once on the same day. If you do not attend the retake or fail the retake, you must reschedule the exam. During the validity period of the driving skills test permit, the number of scheduled attempts for Subject 2 and Subject 3 must not exceed five times each (i.e., a total of ten exam opportunities). If you fail the fifth scheduled exam, the results of other subjects that have been passed will be invalidated, and the student will need to retake the exam starting from Subject 1. Subject 4 exam content: Safe and civilized driving test, with a full score of 100 and a passing score of 90. The question types for Subject 4 are multiple-choice and true/false questions, with questions mainly presented in the form of case studies, pictures, animations, etc.
12
3
Share

How to Complete the Required Hours for Subject Three Quickly?

Dedicating four hours daily to practice is the fastest method. According to the "Motor Vehicle Driver Training and Examination Syllabus," the total training hours for Subject Three must reach 34 hours. This includes 24 hours of practical road driving skills training and 10 hours of safety and civilized driving theory. The daily training duration must not exceed 4 hours. Additional Information: 1. Road Driving Skills Test Content for Subject Three: Vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, lane changing, parking by the roadside, proceeding straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Safety and Civilized Driving Theory Test Content: Requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
15
3
Share

What Causes the Classic Focus to Feel Sluggish and Lack Power During Acceleration?

Focus feeling sluggish and lacking power during acceleration may be due to an intake system malfunction or a fuel supply system issue. Here are some explanations regarding the Focus feeling sluggish and lacking power during acceleration: 1. Lack of Power During Acceleration and the Intake System: The air supply system primarily provides an appropriate amount of air to match the fuel, and the purity of the air directly affects combustion efficiency, which in turn influences power output. Therefore, when experiencing a lack of power during acceleration, the first step is to check whether the intake system is functioning properly. If it appears intact, consider whether the intake system needs cleaning. Remove the air filter and blow out the dust; if it cannot be cleaned thoroughly, replace it. Inspect the throttle body for cleanliness, and further examine the intake valves and intake manifold. Clean them if necessary. If the acceleration still feels sluggish after inspecting and cleaning the intake system, it can be concluded that the issue is unrelated to the intake system. General idle shaking can often be resolved by cleaning the intake system. 2. Lack of Power During Acceleration and the Fuel Supply System: The amount of fuel supplied directly determines the strength of the power output, and the complete combustion of fuel ensures consistent power. Therefore, when experiencing insufficient power, the fuel supply system should also be considered. First, ensure the fuel meets the vehicle's standards. If the fuel lines and connections are intact, inspect the fuel filter, fuel injectors, and fuel pump for any blockages in fuel delivery. Clean or replace them if necessary. Checking the fuel supply system ensures smooth fuel delivery and injection, and a properly functioning fuel pump will eliminate potential obstacles for subsequent operations.
20
1
Share

How to Correct Direction for Front Wheel Skid and Rear Wheel Skid?

When the front wheels skid, the steering wheel should be corrected in the opposite direction; when the rear wheels skid, the steering wheel should be corrected in the direction of the skid, and the vehicle should return to the road after the rear wheels are straightened. Vehicle skidding refers to the phenomenon of sudden acceleration or sudden lateral swinging, which is more likely to occur on curves or in rainy or snowy weather. If a skid suddenly occurs while driving, the driver should try to stay calm, hold the steering wheel firmly with both hands, quickly identify which tire is skidding, immediately release the brake pedal, and swiftly turn the steering wheel in the direction of the skid. On icy or snowy roads, drivers should never use emergency braking. Emergency braking not only fails to stop the vehicle but can also accelerate skidding or even cause the vehicle to roll over. If skidding occurs while going downhill, the driver can accelerate appropriately. If skidding occurs during a turn, the driver should slowly release the accelerator and turn the steering wheel to correct the direction, but be careful not to turn the steering wheel too much to avoid losing control and causing an accident. During a skid, do not abruptly turn the steering wheel or use the foot brake. Immediately release the brake pedal, turn the steering wheel toward the side of the skid, and promptly adjust and correct the direction before continuing to drive.
15
1
Share

What is the foot brake?

The foot brake is the service brake. The service brake is a braking device that stops or reduces the speed of a moving vehicle. It achieves braking through intense friction between the brake pads and the brake drum. In contrast, the handbrake is a parking device and should not be used for braking during driving except in emergencies. Here is a related introduction to the classification of braking systems: 1. Throttle control braking: When deceleration is needed, maintain the 3rd gear position and fully release the throttle. At this point, the engine tends to idle, creating resistance in the drivetrain that acts on the wheels to slow the vehicle down. 2. Exhaust brake: High-power diesel engines have a butterfly valve at the connection between the exhaust manifold and the exhaust pipe. In gear, operating the electromagnetic switch closes the valve, causing the engine to stall and achieve braking. It automatically opens when the throttle is pressed again. Simple in structure but harmful to the engine. Commonly used in heavy trucks and buses. 3. Hydraulic torque converter retarder: A turbine chamber is added at the rear of the transmission housing. When the braking circuit is activated, transmission oil generates damping in the turbine to achieve braking. No wear but requires additional cooling. Currently used in ZF transmissions for high-end buses. 4. Electric turbine retarder: Essentially a "generator" installed on the driveshaft. When not powered, there is no contact or wear. When braking is needed, the circuit is activated, and the driveshaft is subjected to electromagnetic resistance to achieve braking. No wear but bulky in structure. Optional for heavy trucks and buses. 5. Engine braking structure: The braking signal slightly opens the exhaust valve without closing it, creating airflow resistance during piston movement to generate braking force. Compact and non-damaging, currently not available domestically.
2
5
Share

What is the purpose of Subject 2 simulation training?

Subject 2 simulation is designed to mimic the formal Subject 2 driving test, aiming to improve the pass rate. The simulation covers the same test items as the actual exam, serving as a practice test. Below are some key points to note for the Subject 2 test: 1. Reverse parking into a garage: (1) Ensure accurate alignment with reference points and lines, and monitor the distance between the vehicle body and the line via the rearview mirror to prevent the body from crossing the line. (2) Do not stop the vehicle until it is completely inside the garage; pay attention to clutch control to avoid stopping midway or incomplete parking. 2. Parallel parking: (1) Maintain proper distance from the garage when aligning the vehicle, avoiding crossing the line, and be cautious not to run over the garage corner when exiting. (2) Remember to use the turn signal when exiting the garage.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.