···
Log in / Register

What are the overall dimensions of the Audi A4?

4 Answers
LaJeremiah
07/28/25 5:27pm
The overall dimensions of the Audi A4 are 4763cm in length, 1826cm in width, and 1426cm in height, making it a mid-size car launched by Audi. In terms of suspension, the Audi A4 features a five-link independent suspension at the front and a five-link independent suspension at the rear. For the interior, the three-spoke steering wheel is a highlight, offering thumb-button gear shifting functionality. The in-car navigation system on the center console allows for watching TV programs or adjusting audio settings. Regarding safety features, the side head protection air curtains cover the entire side from the A-pillar to the rear of the cabin, and the new intelligent collision sensor designed for the front airbags can detect the severity of an accident.
Was this review help?
15
3
Share
Cheryl
08/11/25 9:34pm
As an A4 owner, I often use this car to transport my family, and its dimensions have left a deep impression on me. The car is 4762 mm long, 1847 mm wide, 1436 mm tall, with a wheelbase of 2820 mm. For daily commuting, parking isn't too troublesome—the side mirrors fold in just right for tight spots in residential areas. The interior is spacious, with enough room in the back for two tall adults without feeling cramped, and the 460-liter trunk capacity is ample for family trips. On weekend long drives, the car feels stable on the highway, with low wind noise and good fuel efficiency. However, the width requires caution in older parking lots to avoid side scrapes. Overall, these dimensions strike a balance between practicality and driving pleasure, making it ideal for families and commuters.
Was this review help?
17
3
Share
Expand All
Elena
09/30/25 2:09am
I've been commuting in my A4 for years, and its dimensions give me a confident driving experience. The length of 4762 mm makes the exterior look sharp and agile, while the width of 1847 mm provides stability in turns. The height of 1436 mm, combined with the low body, gives it a sporty appearance. It handles city streets with ease, and with the help of parking sensors, I can park effortlessly, saving time. The wheelbase of 2820 mm ensures comfortable legroom, and colleagues often praise the rear seats, saying they're not inferior to SUVs. The trunk space is sufficient for a laptop bag and small luggage. In terms of fuel efficiency, the wheelbase design reduces wind resistance, saving on daily expenses. The only drawback is that the width can be a bit cumbersome in narrow alleys, so I remind everyone to measure their parking space before choosing a garage to ensure a good fit.
Was this review help?
18
4
Share
Expand All
BraxtonLee
11/13/25 4:01am
The A4 has been tested multiple times, with dimensions such as a length of 4762 mm, width of 1847 mm, and height of 1436 mm directly impacting driving safety. The 2820 mm wheelbase optimizes weight distribution, ensuring stability at high speeds and reducing wind resistance for improved fuel efficiency. The height facilitates easy entry and exit without head bumps, while the width requires attention during parallel parking. The interior offers ample space for four passengers without feeling cramped, and the 460-liter trunk capacity is more than sufficient for grocery shopping. Daily driving benefits from well-controlled dimensions, making city navigation agile, and the weight of approximately 1.6 tons ensures stability. It is advisable to measure your parking space before purchase to avoid size mismatch issues.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

What engine does the SWM X3 use?

SWM X3 is equipped with a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. The functions of the engine are: 1. Fully burning the fuel injected into the cylinder to generate power; 2. Determining the vehicle's power performance, fuel economy, stability, and environmental friendliness. The 2020 Value Edition SWM X3 features a MacPherson independent front suspension and a five-link coil spring rear suspension. It is powered by a 1.5L naturally aspirated engine with a maximum horsepower of 112 PS, a maximum power of 82 kW, and a maximum torque of 152 Nm, paired with a 5-speed manual transmission.
2
2
Share

What to Do When ETC Signal is Weak?

The solutions for weak ETC signal are: 1. Reserve a cutout for ETC when installing metal film; 2. Replace with a new ETC device; 3. Change the installation position of the ETC. The installation method of the ETC device is: 1. Purchase the ETC device, check if the equipment is complete, and read the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the back adhesive of the device, fold the solar panel towards the vehicle's front windshield, and press firmly to ensure secure attachment; 4. Install the device at the center top of the vehicle's front windshield, ensuring it does not obstruct normal driving visibility. It should be adhered in one go and not removed for reattachment; 5. Insert the ETC card to activate the ETC device. Upon hearing a beep from the device and seeing the indicator light turn on, the device is activated, and the installation is complete.
9
4
Share

What are the drawbacks of ECU remapping for engines?

The drawbacks of ECU remapping for engines are: 1. It requires the use of higher-quality fuel, which increases driving costs; 2. If the ECU upgrade is not done properly, it can affect the engine's lifespan, cause the engine warning light to illuminate, and result in unbalanced power output; 3. Some vehicle models may experience excessive power after the upgrade, making the braking system inadequate, potentially leading to longer braking distances and safety concerns; 4. It may void the warranty. The function of an engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning it in a sealed cylinder, causing the gas to expand and push the piston to perform work. The components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system.
3
3
Share

Should the engine be warmed up before an oil change?

It is necessary to warm up the engine before changing the oil. The method for warming up is: After starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature. The steps for changing the oil are: 1. Lift the vehicle, remove the undercover, and place a container beneath the oil drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after the oil has drained and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil through the filler port. Precautions for changing the oil include: 1. Perform the oil change while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the appropriate amount of new oil; 3. After adding the oil, start the engine and check all components for leaks. Let the engine run for 3 minutes to confirm the oil level is at the normal mark.
2
2
Share

Is Skoda a Joint Venture or Domestic Car?

Skoda is a joint venture car. Its body dimensions are: length 4675mm, width 1814mm, height 1460mm, with a wheelbase of 2686mm, fuel tank capacity of 68.5 liters, trunk capacity of 570 liters, and a body weight of 1440kg. The 2019 standard version of Skoda features a MacPherson independent front suspension and a four-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
5
5
Share

What is the disassembly and installation method for the ŠKODA Superb navigation system?

The disassembly and installation method for the ŠKODA Superb navigation system is as follows: 1. Remove the button panel and air vents on the center console; 2. After removing the panel, unplug the connecting wires, loosen the relevant screws, take out the single-disc CD player, and disconnect the connecting wires to complete the disassembly; 3. Use screws and clips to install the new navigation device in the original center console panel position, remove the packaging from the navigation screen, and eliminate any bubbles on the screen film before completing the installation. The navigation modes include: 1. Path retrieval customization mode; 2. Site setting mode; 3. Map positioning mode. The functions of the navigation system are: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interface; 5. Wireless communication.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.