What are the original tires for the Audi A4L?

1 Answers
VanJourney
07/30/25 9:58am
Audi A4L comes with original tires from brands such as Michelin and Goodyear, with tire sizes including 245/35R19, 245/40R18, and 225/50R17. Among them, the Goodyear Tire & Rubber Company, founded in 1898 in the United States, has over a century of history. Goodyear is the world's largest tire manufacturing company, headquartered in Akron, Ohio, USA. The company primarily produces tires, engineered rubber products, and chemical products in over 90 factories across 28 countries. For the Audi A4L tires during daily use, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread wears flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts during high-speed driving. Additionally, promptly remove pebbles stuck in the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and tire pressure may increase. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool the tires, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the ground.
Was this review help?
9
5
Share
More Forum Discussions

How Long Until the First Driver's License Renewal?

The first driver's license renewal period is six years. Driving with an expired license is prohibited and may be treated as driving without a license. Motor vehicle drivers should apply for license renewal at the vehicle management office of the license issuing authority within 90 days before the expiration of their current driver's license. When applying, they must fill out the 'Motor Vehicle Driver's License Application Form.' If a driver has not accumulated 12 or more penalty points in any scoring cycle during the six-year validity period of their license, they will be issued a new license with a ten-year validity period. If they continue to maintain this record during the ten-year validity period, they will be issued a long-term valid driver's license. Time regulations: If the license has been expired for less than a year, it can be renewed normally; if expired for more than one year but less than three years, the license will be revoked, but it can be renewed by passing the subject one test; if expired for more than three years, the license becomes invalid and cannot be renewed.
13
2
Share

What does it feel like after changing manual transmission fluid?

After changing the transmission fluid, it helps maintain the cleanliness of the gear system, ensures the proper functioning of the transmission, and extends the lifespan of the drivetrain. Performance and maintenance methods of transmission fluid: Transmission fluid reduces friction, minimizes wear, and controls the performance of the clutch and synchronizer. It also bears loads (low-speed high torque, vibration loads), dissipates heat, reduces vibration and noise, and removes contaminants from gear meshing (cleaning function). Additionally, it prevents corrosion, pitting, and surface metal stripping, isolates metal surfaces, and prevents direct contact between metal components. When experiencing body shaking, gearshift jerking, or a transmission overheating warning on the dashboard, the transmission fluid should be replaced promptly. Methods for changing transmission fluid: Loosen the drain plug at the bottom of the transmission to drain the old fluid before refilling, or directly remove the transmission oil pan to drain and refill. The latter method is more thorough, as it removes impurities from the bottom of the oil pan. Alternatively, a smart circulation machine can be used for dynamic fluid replacement, which filters and cleans sludge and impurities inside the automatic transmission through circulation.
4
1
Share

What Causes Difficulty in Shifting Gears in a Manual Transmission?

1. Clutch cable failure. Some manual transmission vehicles still use cables to control the clutch. The cable sheath is prone to breakage, leading to difficulty in shifting gears without the clutch. This issue is relatively simple to fix—just replace the cable directly. 2. The gear self-locking force on the clutch side is too strong, making it difficult to engage or disengage gears. In this case, it is recommended to go to a repair shop to adjust the clutch cable and gear stop lock. 3. Failure of the clutch master cylinder. The clutch hydraulic master cylinder may lose pressure or leak oil during use. When pressing the clutch pedal to shift, the shift lever may fail to engage. The clutch master cylinder needs to be replaced at a service station, and the system must be bled afterward. 4. Transmission issues, such as insufficient transmission fluid, a stuck transmission shift mechanism, or a fault in a specific gear or shift fork, can all lead to difficulty or failure in shifting gears. For transmission problems, it is necessary to visit a professional repair shop for a detailed inspection. The steps for starting a manual transmission vehicle are: 1. After starting the car, press the clutch pedal all the way down with your left foot to completely disengage the clutch. 2. Shift the transmission into first gear. 3. Press or lift the electronic handbrake button. 4. Ensure safety by observing the road and other vehicles or pedestrians. 5. Continue pressing the clutch pedal with your left foot to keep the clutch disengaged, press the accelerator pedal with your right foot, and slowly release the clutch pedal with your left foot.
7
2
Share

What does (a) mean in a car?

The 'a' in a car refers to the Auto Hold function. Below is additional information: Introduction to the Auto Hold function: Auto Hold is an automatic braking feature. Once activated, for example, when stopping at a traffic light, it simplifies operations by eliminating the need to use the handbrake or electronic parking brake. For automatic transmission models, it also avoids frequent switching between D to N or D to P. How Auto Hold works: Auto Hold is an extension of the ESP (Electronic Stability Program) functionality, controlled by the ESP components. When the vehicle comes to a temporary stop and needs to restart shortly after, the braking for this situation is managed by the ESP-controlled brakes. The computer uses a series of sensors to measure the vehicle's levelness and wheel torque, determining any tendency for the vehicle to roll. It then applies an appropriate braking force to the wheels to keep the vehicle stationary.
10
3
Share

What is the lifespan of a dual-clutch transmission?

Generally, the lifespan of a dual-clutch transmission is around 20 years or 500,000 kilometers. Below is some extended information: Internal structure of the transmission: A dual-clutch transmission mainly consists of four components: the gear transmission, shift actuation mechanism, control system, and dual-clutch assembly. Typically, parts that may need replacement include the clutch gear bearings. The clutch plates experience significant wear but are relatively inexpensive and easy to replace. In contrast, gears and bearings may require a major overhaul or complete transmission replacement, involving more materials such as carbon steel, alloy steel, ductile iron, and gray cast iron. These materials are highly durable, making them less prone to damage under normal conditions. Methods to extend lifespan: Avoid prolonged low-speed driving. During traffic congestion, the clutch plates remain in a semi-engaged state and frequently shift between first and second gears, accelerating wear and reducing lifespan. In such situations, shifting to 'S' mode for low-speed driving can help avoid constant switching between first and second gears. Avoid excessively fast gear shifts—this does not refer to upshifting or downshifting during driving, but rather shifting into forward gear before the vehicle has fully stopped when reversing. Such actions can cause severe gear impact, thereby shortening the lifespan of the dual-clutch assembly.
18
5
Share

How Often Should Seat Belts Be Inspected After Years of Use?

Seat belts should generally be inspected once every two years of use. Here are some precautions for using seat belts: Lap Belt: The lap belt should be fastened snugly across the lower part of the hip bones, making direct contact with the femur area. In the event of a collision, the impact force will be distributed to the pelvic bones, preventing the belt from tightening around the abdomen and causing serious injuries. Shoulder Belt: The shoulder belt should be positioned across the shoulder and over the chest. These areas of the body can effectively withstand the restraining force of the seat belt. General Usage: The seat belt should be positioned across the hips and chest, forming a horizontally placed V-shape over the pelvis and ribcage. It should be used by one person only; sharing with another person is strictly prohibited. Avoid twisting the seat belt during use.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.