What are the odd-even traffic restriction hours on Dalian Binhai Road in 2020?

1 Answers
VonCharlie
07/29/25 11:52am
In 2020, the odd-even traffic restriction period on Dalian Binhai Road was from 00:00 on May 1 to 24:00 on October 8, enforced from 9:00 to 17:00 every Monday to Friday, excluding weekends and statutory holidays. The restricted sections include Binhai East Road and Yingbin Road to Hutan Road. Passenger vehicles with Liaoning B-series license plates (small car plates) are subject to odd-even restrictions based on the last digit of their license plate number (rightmost Arabic numeral). Vehicles with odd-ending numbers (1,3,5,7,9) can drive on odd dates, while those with even-ending numbers (2,4,6,8,0) can drive on even dates. Emergency vehicles (police cars, fire trucks, ambulances, engineering rescue vehicles) and official vehicles with unified markings (administrative, industrial/commercial, traffic law enforcement) are exempt from these restrictions.
Was this review help?
15
4
Share
More Forum Discussions

What Causes the Clicking Sound in the Differential?

Differential clicking sounds are generally caused by low machining precision of the gear teeth or improper meshing. In such cases, it is best for the car owner to have the vehicle inspected and repaired at a 4S shop. Below is relevant information about automotive differentials: Principle: The differential is a device designed to adjust the speed difference between the left and right wheels. In four-wheel drive systems, to power all four wheels, they must be interconnected. If all four wheels are mechanically linked together, the car cannot rotate at the same speed when cornering. To ensure the car's rotational speed remains consistent during curves, a center differential is added to adjust the speed difference between the front and rear wheels. Function: The automotive differential primarily eliminates mechanical interference caused by inconsistent rotational speeds of the left and right wheels during turns. Without a differential, mechanical damage could occur due to the speed discrepancy between the wheels. For example, conventional human-powered tricycles do not have differential devices installed, so they can only use single-side drive when turning.
15
2
Share

Is it mandatory to carry the original vehicle license when driving?

It is mandatory to carry the vehicle license of the car owner when driving. Relevant introductions are as follows: Relevant regulations: According to Article 11 of the Road Traffic Safety Law of the People's Republic of China, when driving a motor vehicle on the road, the vehicle license plate must be displayed, the inspection qualification mark and insurance mark must be placed, and the motor vehicle license must be carried with the vehicle. Vehicle license verification system: The vehicle license verification system can verify the authenticity of the motor vehicle, query motor vehicle information, and provide travel safety guarantees. Simply enter the basic information of the motor vehicle into the system to verify whether the motor vehicle is authentic. If the information matches, other details of the motor vehicle can also be verified.
7
5
Share

Is the turn signal lever for manual transmission up-right-down-left?

Manual transmission turn signal lever follows an up-right-down-left pattern. Here are the details: Turn signal switch: In modern cars, the turn signal switch is typically located on the left side of the steering wheel. The operation method can be summarized as "up-right-down-left". Drivers can imagine the turn signal lever as the steering wheel - simply push it in the direction you intend to turn. Turn signal usage: When observing a need to turn ahead while driving, always activate the turn signal about 10 seconds in advance to alert following vehicles to take timely measures such as slowing down or stopping to avoid collisions or rear-end accidents. However, it's also not advisable to activate the turn signal too early, as this might cause visual fatigue for following drivers and potentially trigger "road rage". The timing mainly depends on the driver's judgment.
17
0
Share

Reasons Why a Motorcycle Cannot Accelerate After Starting?

Motorcycle cannot accelerate after starting due to lean fuel mixture or poor crankshaft case sealing in two-stroke engines. Specific reasons are as follows: Lean Fuel Mixture: A lean air-fuel mixture causes insufficient gas pressure on the piston after ignition, prolongs combustion time, and leads to engine overheating. Symptoms of lean mixture include poor acceleration during operation, temporary improvement when manually adjusting the choke or pumping fuel, and recurrent acceleration weakness without enriching the mixture. Poor Crankshaft Case Sealing in Two-Stroke Engines: Air leaks from failed crankshaft oil seal on the generator side; sealing surface leakage at crankshaft case midline; leakage between crankshaft case and cylinder interface or incorrect piston installation orientation.
17
0
Share

New Energy Vehicle Battery Repair Technology?

New energy vehicle battery repair technologies are as follows: Imbalance: The repair method involves identifying batteries with consistent capacity, voltage, self-discharge, and internal resistance, then using them together. Sulfation: The repair method involves using the Kedi repair device to desulfate the battery, applying fuzzy digital control theory to measure the battery's state and continuously emit positive and negative variable-frequency microparticle waves during charging and discharging, taking 10 to 20 hours to remove the hardened lead sulfate crystals inside the battery. Plate softening: The repair method involves discharging the battery to 10.5V, then deeply discharging it with a bulb for 1 to 5 hours, followed by activation and repair using an activation device. Short circuit: The repair method for water batteries involves drilling to clean and remove the short-circuited lead powder, while for electric vehicle batteries, a rapid short circuit between the positive and negative terminals can burn out the short-circuited area.
11
4
Share

What is the reason for the EPC light being on and the accelerator pedal not responding?

EPC is the electronic throttle fault light. When it is illuminated, it may indicate an issue with the throttle, causing the accelerator pedal to be unresponsive. The following are possible symptoms when the throttle malfunctions: Unstable idle speed: The engine idle speed is unstable or there is no idle, the high idle speed persists and does not drop, and the engine is difficult to start, especially during cold starts. Engine problems: Difficulty starting the engine, insufficient engine power, poor acceleration performance, and unstable operation. Increased fuel consumption: Black smoke from the car's exhaust pipe and increased fuel consumption. Poor acceleration response: This is closely related to the dirtiness of the throttle. Cleaning the throttle can reduce fuel consumption and make the engine more responsive and powerful.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.