What are the new vehicle inspection regulations effective November 20?

1 Answers
LucilleFitz
07/29/25 11:55am
The new vehicle inspection regulations effective November 20 are as follows: Non-operational passenger vehicles: (Including non-operational passenger cars, small and mini non-operational passenger vehicles. Starting from November 20, 2020, 7-9 seat non-operational mini and micro buses (excluding minivans) are included in the exemption range) Exempt from on-site inspection within 6 years, only requiring inspection mark application every two years. Over 6 years but under 10 years: Starting from November 20, 2020, for vehicles over 6 years but under 10 years, the inspection cycle is relaxed from annual inspection to biennial inspection. This means private vehicles only require two on-site inspections within 10 years - at the 6th and 8th year respectively.
Was this review help?
16
3
Share
More Forum Discussions

What is the reason for poor navigation sound quality after replacing the large screen?

Poor navigation sound quality after replacing the large screen is due to the weak sound processing system of the large screen navigation. The following are the drawbacks of installing a large screen navigation: 1. Matching and visual aspects: Although the functions of third-party central control screens are relatively comprehensive, the matching degree is definitely not as good as the original central control screen, and it may appear a bit abrupt and uncoordinated visually. 2. Installation process: The installation involves relatively complex wiring. If the central control screen is installed unprofessionally or incorrectly, it may cause screen malfunctions or even burn out components in the car, posing certain safety hazards. Therefore, it is essential to have it installed at a regular auto repair shop.
6
4
Share

What is the situation when there is water under the driver's seat?

The reasons for water under the driver's seat are as follows: 1. Sunroof leakage due to poor sealing, check the sunroof. 2. Water from car washing that was not cleaned properly. 3. Corrosion and leakage of the interior heater core. Extended content handling methods: 1. Go to a car cleaning shop, remove the floor mats, and use a vacuum cleaner to remove most of the water. 2. Whether it's loop mats, leather mats, rubber mats, or full TPE mats, use dry towels alternately under the mats to absorb water until they are clean. Otherwise, they may smell or mold, affecting driving. 3. Use high-pressure air at a repair shop to blow through the pipes to clear them.
7
0
Share

Why Are Japanese Car Paints Generally Thin?

The reason why Japanese car paints are thin is to maintain the smoothness of the car surface. Below is relevant information about car paint: 1. Function of car paint: The primary role of car paint is to protect the car's surface from corrosion, enhance the car's aesthetic appeal, and prolong its service life. 2. Performance aspects: Car paint must meet high-performance requirements, including excellent mechanical properties and gloss, as well as outstanding scratch resistance and wear resistance. 3. Paint material: Car paint is typically a baked finish, processed through multiple layers and dried at temperatures as high as 200 degrees Celsius to achieve stable properties, forming a durable oil film on the car body to protect it.
15
5
Share

Can Aisin 6AT Run for 500,000 Kilometers?

Aisin 6AT cannot run for 500,000 kilometers. Here are the relevant details: 1. Lifespan: With proper maintenance, the Aisin 6AT transmission has a lifespan of approximately 200,000 kilometers. The actual lifespan may vary depending on the vehicle's usage and the owner's driving habits. While major failures are unlikely, regular inspections of components such as the clutch are necessary. 2. Technical Design: The Aisin 6AT transmission utilizes a dual planetary gear set, with an expanded lock-up range design that reduces fuel consumption during upshifts. Additionally, the fuel-saving valve employs advanced structural technology to enhance fuel combustion efficiency more effectively and rationally, whether at idle or during acceleration. Furthermore, the incorporation of a long-stroke damper in the torque converter effectively suppresses vibrations.
16
4
Share

What is the Function of Vehicle Stability Control System?

Vehicle Stability Control System, also known as Anti-Skid Control System, is an active safety system developed by Toyota that significantly improves vehicle handling safety and driving convenience. In emergency situations such as sharp turns, sudden acceleration, or hard braking, the system can quickly detect and take corresponding braking measures, such as individually controlling each tire while reducing engine output to maintain vehicle stability. Its functions include the following three aspects: 1. During emergency braking, the ABS function prevents wheel lock-up. When wheels slip, the TCS function controls engine output and wheel braking to prevent wheel spin. 2. When the vehicle is making sharp turns, swerving to avoid suddenly appearing cars or animals, or experiencing understeer causing the vehicle to slide outward or oversteer causing the vehicle to cross the centerline or even spin, the system uses computer control to adjust engine output and apply braking force to individual wheels (with varying intensity) to counteract understeer or oversteer, thereby enhancing dynamic driving stability. 3. System Features: Compared to other active safety systems like ABS, the VSC system has three main characteristics: Real-time Monitoring: The VSC system continuously monitors the driver's inputs (steering, braking, throttle, etc.), road conditions, and vehicle dynamics, sending constant instructions to the engine and braking system. Active Intervention: While safety technologies like ABS primarily intervene based on driver actions, they cannot regulate the engine. The VSC system actively adjusts the engine throttle to modify engine speed and modulates the driving/braking force on each wheel to correct excessive understeer or oversteer.
19
3
Share

What are the characteristics of an Atkinson cycle engine?

Here is an introduction to the characteristics of the Atkinson engine: 1. Advantages: High compression ratio, long expansion stroke, the power stroke of the piston is larger than the intake stroke, the intake volume is relatively reduced. By delaying the closing of the intake valve, part of the mixed gas is pushed back into the intake manifold, thereby relatively reducing the theoretical air-fuel mixture entering the combustion chamber each time, while the power stroke relatively increases the work output, improving fuel economy. 2. Disadvantages: The Atkinson engine is an internal combustion engine cycle with a high compression ratio and long expansion stroke, offering excellent part-load economy but poor full-load power performance.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.