What are the new regulations on the inspection period for motor vehicles?

1 Answers
DelAniyah
08/27/25 3:36am
Small and micro non-operating passenger vehicles must be inspected once every 2 years within the first 6 years; once a year after exceeding 6 years; and twice a year after exceeding 15 years. Below is a detailed introduction to vehicle annual inspections: 1. Overview: Vehicle annual inspection refers to the annual inspection of vehicles that have already obtained official license plates and registration certificates, conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to check the main technical conditions of the vehicle, encourage enhanced maintenance, keep the vehicle in good condition, and ensure driving safety. 2. Others: Operating passenger vehicles must be inspected once a year within the first 5 years and once every 6 months after exceeding 5 years. Trucks and large and medium-sized non-operating passenger vehicles must be inspected once a year within the first 10 years and once every 6 months after exceeding 10 years. Motor vehicle annual inspections are divided into initial annual inspections and regular annual inspections.
Was this review help?
4
5
Share
More Forum Discussions

How Does a Car Airbag Work?

How a car airbag works: During driving, the sensor system continuously sends speed change information to the control unit, which analyzes and evaluates this data. When the measured acceleration, rate of speed change, or other indicators exceed predetermined thresholds, the control unit sends an ignition command to the gas generator, triggering a rapid chemical reaction that produces a large volume of gas to inflate the airbag. The vent holes in the airbag then dampen the impact energy to protect occupants. The airbag system is a passive safety protection device that, when used in conjunction with seat belts, provides effective collision protection for vehicle occupants.
3
0
Share

What is the wheel speed signal channel number for Volkswagen?

Volkswagen ABS wheel speed signal channel number is 03-04-001. If any issues occur, it's best to have it handled at a professional repair shop. Here is some relevant information: 1. ABS: ABS stands for Anti-lock Braking System. Its function is to automatically control the braking force during vehicle braking to prevent wheel lock-up, ensuring maximum traction between the wheels and the road surface. 2. Control channels: ABS can be classified by control channels. Brake pipelines that can independently adjust braking pressure are called control channels. ABS systems are categorized into four-channel, three-channel, two-channel, and single-channel types.
8
4
Share

What to Do When the Brake Warning Light Comes On?

When the brake warning light comes on, you should immediately have it inspected. Below are the possible reasons for the brake warning light: 1. Low brake fluid level, causing the brake system to overheat and create vapor lock. 2. A damaged tail light bulb. 3. Severely worn brake pads. Here is additional information about the function of brake lights: 1. Enhances the penetration of light, allowing vehicles behind to notice when the front vehicle brakes, even in low visibility conditions. 2. Makes it easier for following vehicles to detect braking, preventing rear-end collisions. 3. Alerts drivers behind to maintain a safe distance.
18
5
Share

How many kilometers can 18 liters of fuel run?

18 liters of fuel can run 120 kilometers. More related information is as follows: 1. Gasoline classification: Gasoline products can be divided into three categories according to their use: aviation gasoline, automotive gasoline, and solvent gasoline. The first two are mainly used as fuel for gasoline engines and are widely used in cars, motorcycles, speedboats, helicopters, and agricultural and forestry aircraft. 2. Solvent gasoline: Solvent gasoline is used in the production of synthetic rubber, paint, grease, perfume, etc.; gasoline components can also dissolve substances that cannot be dissolved, such as oil stains, and play a role in cleaning oil stains; as an organic solution, gasoline components can also be used as an extractant.
1
4
Share

What Causes the Trunk of a Car to Make Strange Noises?

Car trunk noise is usually caused by improperly placed items in the trunk or the door not being closed properly. It is necessary to check whether there are loose or missing screws in the trunk to identify the source of the noise. It is recommended not to place heavy objects in the car trunk and to always ensure that the trunk is properly closed before driving. There is a type of noise that is not related to the speed of the car; the sound is irregular, like a tapping noise. In such cases, it is advisable to check for loose items in the trunk or inspect the car's chassis, as the noise might be caused by damage to the chassis.
10
4
Share

How to Determine Oil Emulsification?

Methods to determine oil emulsification: Open the engine hood and observe the area behind and below the oil filler cap. If there is a thick layer of sticky liquid resembling chocolate milk or the oil appears milky white or creamy yellow, looking like a batter mixed with water and containing bubbles, it indicates that the engine oil has emulsified and deteriorated. Emulsified oil has lost its effectiveness, with all its functions diminished, and should no longer be used. The presence of emulsification near the oil filler port is due to the contact with air, where water vapor in the air condenses on the oil filler cap with temperature changes, leading to slight emulsification.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.