What are the new regulations for yellow-label vehicles in 2021?

Can the Rear Seats of Volkswagen Santana Be Folded Down?

The rear seats of the Santana cannot be folded down. The rear seats of this model are fixed with screws and can only be removed, not folded. Here is some information about folding rear seats: 1. There are two types of rear seat folding: split-folding rear seats and full-folding rear seats. 2. Split-folding rear seats: Split-folding rear seats refer to the backrests of the rear seats being able to be folded down in a certain ratio. Compared to full-folding rear seats, split-folding offers greater flexibility, allowing only half of the backrest to be folded down for carrying large items while the other half remains usable for seating. 3. Full-folding rear seats: Full-folding rear seats refer to the backrests of the rear seats being a single unit. When more space is needed for larger items, the entire backrest of the rear seats can be folded down to provide additional space.

4

5

Share

What are the reasons for the engine warning light in the Baojun 730?

Sensor issues, engine misfire, car maintenance problems, fuel quality issues, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust problems, and anti-theft system malfunctions are the main causes of the engine warning light illuminating. Additionally, when starting the car, the vehicle performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check is completed. If it remains on for an extended period, you should promptly visit a repair shop to seek professional help and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor Issues: Sensors include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, which will trigger the engine warning light. Solution: If such issues occur, promptly visit a repair center for professional inspection to eliminate safety hazards. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light. Vehicles have specific maintenance cycles. If maintenance is not performed on schedule, combined with poor driving habits, the engine's operational burden increases, eventually causing the engine warning light to illuminate as a reminder of a fault. Solution: Follow the time or mileage specified in your car's maintenance manual to perform comprehensive maintenance and rule out non-maintenance-related issues. Fuel Quality Issues: This includes both fuel and engine oil. The fuel used in cars usually has a specific octane rating, and engine oil can be semi-synthetic or fully synthetic. Manufacturers typically recommend which fuel octane rating and oil type to use. If the owner fails to adhere to these recommendations, long-term use can lead to engine wear, triggering the warning light. Solution: Use the appropriate fuel octane rating and engine oil grade as specified for your vehicle. Poor Combustion of Air-Fuel Mixture: Faulty spark plugs, fuel pump issues, or clogged fuel lines can lead to poor combustion of the air-fuel mixture in the engine. Poor combustion results in engine carbon buildup or knocking, which is detected by the oxygen sensor and reported to the ECU, triggering the warning light. Intake Issues: Engine combustion requires proper air intake, and the air filter plays a crucial role. If the air filter is dirty or not cleaned regularly, it can affect the engine's air intake, potentially leading to blockages and, in severe cases, illuminating the engine warning light. Solution: Regularly clean or replace the air filter to ensure the intake system functions properly. Turbocharging Issues: Intake boost pipes or turbocharger malfunctions can also trigger the engine warning light. The most common issue is turbocharger failure, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Solution: Visit a 4S shop to inspect and replace the turbocharger. In most cases, repair is not cost-effective, and replacement is recommended. Exhaust Issues: Rear oxygen sensors, catalytic converters, exhaust camshafts, and bearings can cause the engine warning light to illuminate. The most common issue is catalytic converter failure, often caused by physical damage or fuel system malfunctions. Solution: Use lead- or silicon-based lubricants for catalytic converter maintenance and cleaning. Anti-Theft System: If the car's anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the engine may not operate correctly, and the warning light will illuminate. Solution: Visit a professional repair shop for a thorough system check, as this issue cannot be fixed individually. Engine Misfire: This occurs when one or more cylinders fail to operate or operate poorly, leading to insufficient power, difficulty starting, or unstable idling. Solution: First, identify which cylinder's components are faulty and replace them. If internal mechanical damage is detected, a major repair at a professional shop is necessary.

2

5

Share

What are the differences between the Bora Legend and the all-new Bora?

1. Different prices: As a facelifted and upgraded product, the all-new Bora is priced higher than the Bora Legend. In terms of body dimensions, the all-new Bora measures 4663mm/1815mm/1462mm in length, width, and height, with a wheelbase of 2688mm, while the Bora Legend measures 4562mm/1793mm/1468mm, with a wheelbase of 2614mm. 2. From the perspective of body dimensions: The all-new Bora is overall larger than the Bora Legend. This is because the all-new Bora is based on Volkswagen's new MQB platform, while the Bora Legend still comes from the PQ34 platform, so the all-new Bora offers significantly better space and comfort compared to the Bora Legend. 3. In terms of power: Both models are equipped with the same engine, but there are slight differences in tuning.

17

3

Share

How to Open the Buick Engine Hood?

Buick engine hood opening method is as follows: 1. Open the car door and pull the lever located on the left side under the dashboard. 2. The engine hood will pop out from the locking mechanism due to spring force, revealing a handle near the radiator grille. 3. Pull the handle upward and lift the engine hood to fully unlock it. 4. Remove the support rod from its holder and insert it into the hole on the right side of the engine hood. 5. Before opening the engine hood, ensure the windshield wipers are flat against the windshield to avoid potential paint damage.

11

0

Share

How to Replace the Key Battery for Hyundai Elantra?

Here are the detailed steps to replace the key battery for Elantra: 1. Prepare a small knife or flat-head screwdriver and a CR2032 button battery. 2. Take out the mechanical key from the key fob. 3. Turn the key over and unscrew it. 4. Locate the green chip and pry it open using the small knife or flat-head screwdriver. 5. After opening the chip, you will see the button battery. Remove the old battery and replace it with the new one. 6. Reassemble the key following the disassembly steps in reverse order. The Elantra has dimensions of 4610mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2700mm. In terms of power, it is equipped with a 1.6L hybrid system, with the engine delivering a maximum power of 105 horsepower and a maximum torque of 77.2 kW.

19

1

Share

Where to Adjust the Tire Pressure Monitoring in the New Elantra?

The tire pressure monitoring in the New Elantra is located next to the headlight height adjustment button below the steering wheel on the driver's side. According to the international GBT2978-2008 standard requirements, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete.

2

Share

What are the new regulations for yellow-label vehicles in 2021?

Can the Rear Seats of Volkswagen Santana Be Folded Down?

What are the reasons for the engine warning light in the Baojun 730?

What are the differences between the Bora Legend and the all-new Bora?

How to Open the Buick Engine Hood?

How to Replace the Key Battery for Hyundai Elantra?

Where to Adjust the Tire Pressure Monitoring in the New Elantra?

Where is the trunk switch located inside the Roewe ei6?

What does a 12V mild hybrid system mean?

What is the ground clearance of the Golf GTI?

How often should the Cavalier get its first maintenance?