What are the new regulations for vehicle annual inspection in November 2020?

2 Answers
RyderRose
07/29/25 6:26am
New regulations for vehicle annual inspection: Starting from November 20, 2020, non-operational small and micro passenger vehicles with 7-9 seats (excluding minivans) within 6 years of age will be included in the exemption scope; for non-operational small and micro passenger vehicles (excluding minivans) over 6 years but under 10 years old, the inspection cycle will be relaxed from once a year to once every two years. This means private cars will only need to undergo on-site inspections twice within 10 years, specifically in the 6th and 8th years. Inspection content: Check whether the engine, chassis, body, and auxiliary equipment are clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records; Test whether the vehicle's braking performance, steering control, lighting, exhaust, and other safety performance meet the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles"; Check whether the vehicle has been modified, altered, or transformed, whether the driving license, license plate, and all registered vehicle records match the actual condition of the vehicle, whether there have been any changes, and whether approval and alteration procedures have been completed; Check whether the license plate, driving license, and enlarged license plate characters printed on the vehicle are damaged, altered, or illegible, and whether replacement is needed; For large vehicles, check whether the name of the unit or the street, township, or town where the vehicle is located and the maximum seating capacity in the cab are printed in Chinese imitation Song font on both sides of the door as required; For trucks, check whether the rear tailgate (including the trailer's rear tailgate) has the vehicle number enlarged 2-3 times and printed on the outside as required, and whether the word "individual" is printed on both sides of the door for individually or jointly owned vehicles. The characters must be clear, and unit codes or other patterns are not allowed (special circumstances require approval from the vehicle management office).
Was this review help?
5
0
Share
SanAlaina
08/12/25 9:52am
As someone who frequently deals with automotive matters, I remember that the new regulations implemented in November 2020 significantly simplified procedures for private vehicles. New cars no longer require biennial on-site inspections within the first six years, instead mandating comprehensive physical inspections only in the 6th and 10th years. For intermediate years, owners simply need to apply for inspection labels online without visiting testing stations. This policy applies to non-commercial passenger vehicles with 7 seats or fewer, excluding minivans and commercial vehicles. The changes aim to reduce owner burdens and administrative complexity while optimizing inspection items, such as combining certain lighting and emission tests for greater efficiency. For me, this represents substantial progress, particularly benefiting young professionals and busy individuals by saving time and effort. However, don't assume safety standards are relaxed - key year inspections actually become more stringent. Overall, the new regulations reflect a user-friendly trend, making vehicle inspections better suited to modern lifestyles.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

How often should the transmission fluid in the Jade be changed?

The transmission fluid in the Jade should be changed every two years or after driving 40,000 kilometers. The method for changing the transmission fluid in a car is as follows: 1. First, lift the car and place a large container underneath to catch the used fluid. Use an appropriate screwdriver to remove the inner and outer covers of the transmission, being cautious as some transmission fluid may spill out. 2. After a few minutes, when most of the fluid has drained, carefully remove the last oil pan, ensuring to support it by hand as it still contains a significant amount of used fluid. Upon removal, you will notice residue at the bottom of the oil pan. 3. Carefully remove the transmission fluid filter, which will clearly reveal the solenoid valve controlling gear shifts. 4. Remove the oil pan gasket and clean the surrounding area. If there are hard-to-reach spots, use tools for thorough cleaning. Over time, the rubber on the gasket may stick to the machine edges, requiring a small scraper and carburetor cleaner for easier and more thorough removal. 5. Wipe all cleaned transmission fluid filtration components with cotton cloth and reinstall them. Filters are generally for one-time use, so replace them along with the new fluid and gasket during the oil change.
3
4
Share

Is it necessary to clean the three-way catalytic converter of the New Transit?

The three-way catalytic converter generally does not need cleaning. The failure rate of the three-way catalytic converter is very low, and cleaning is typically done using a no-disassembly method similar to an IV drip. Usually, the three-way catalytic converter should be inspected and cleaned as needed every 30,000 kilometers. It is advisable to clean the three-way catalytic converter whenever the fuel injectors, throttle, and intake tract are serviced. Additionally, it is best to clean the three-way catalytic converter before the annual vehicle inspection to ensure smooth passage of the emissions test. When fuel quality is poor, sulfur, phosphorus, lead, and manganese-containing anti-knock agents in the fuel can form chemical complexes inside the three-way catalytic converter after combustion. Due to its honeycomb structure, the three-way catalytic converter is prone to clogging. The use of manganese-containing anti-knock agents in fuel, sulfur- and phosphorus-containing antioxidants in lubricants, and traffic congestion can easily lead to poisoning, failure, or clogging of the three-way catalytic converter. As a critical component of automotive exhaust treatment, the three-way catalytic converter significantly reduces pollutants in vehicle emissions, and all exhaust gases must pass through it. If the three-way catalytic converter is damaged or clogged, it is similar to a blocked exhaust pipe, resulting in a noticeable decrease in vehicle power, increased fuel consumption, and severe exhaust pollution.
18
3
Share

What Does the Number of Axles on a Vehicle Mean?

The function of the number of axles on a vehicle is to bear the load of the vehicle and maintain its normal operation on the road. Vehicles are categorized by the number of axles: single axle, double axle, front four rear four, front four rear eight, semi-trailer for more axles, two-axle tractor with three-axle trailer, three-axle tractor with three-axle trailer. Below are the applications of vehicle axle counts: 1. Ordinary family cars generally use a single axle. 2. For highway transport vehicles with a total mass less than 19 tons and vehicles not subject to road or bridge axle load limits, such as mining dump trucks, a simple and cost-effective two-axle configuration is typically used. 3. Highway transport vehicles with a total mass between 19-26 tons adopt a three-axle configuration, while vehicles with even greater total mass should use four or more axles. 4. Generally, three-wheeled trucks have a capacity of 2 tons; low-speed trucks (four wheels with a maximum design speed less than 70 km/h) 4.5 tons; two-axle trucks 17 tons; three-axle trucks 25 tons (27 tons for vehicle combinations consisting of a two-axle vehicle and a one-axle trailer); four-axle trucks 35 tons; five-axle trucks 43 tons; six-axle and above trucks 49 tons.
10
3
Share

Why is the car navigation screen very dark and almost invisible?

If the car's central control screen becomes dark, it may be due to damage to the display and require replacement. Here is the relevant introduction: 1. Purpose: The uses of the car's central control display screen include providing a visual reversing image, playing DVDs, and navigation; all navigation technologies involve positioning the navigator's location by comparing it with known positions or patterns. 2. Navigation: This is a field of study that focuses on monitoring and controlling the process of moving a craft or vehicle from one place to another. The field of navigation includes four general categories: land navigation, marine navigation, aerial navigation, and space navigation. It is also an art term used for the professional knowledge that navigators employ to perform navigation tasks.
18
4
Share

Can a temporary license plate be used in another city?

During the use of a local temporary license plate, the vehicle is not allowed to leave the city, while an out-of-town temporary license plate permits travel outside the city. Relevant information is as follows: 1. Introduction to temporary license plates: A temporary license plate serves as an interim plate before a new vehicle obtains its official license plate. During this period, the temporary license plate must be used for driving on the road, and it holds the same legal effect as an official license plate. Once the official license plate is obtained, the temporary license plate becomes invalid. 2. There are four types of temporary license plates: Temporary license plates within the administrative jurisdiction (for new cars sold within the city), temporary license plates across administrative jurisdictions (for new cars sold to other cities), temporary license plates for test vehicles (test cars, engineering prototypes, etc.), and temporary license plates for special vehicles.
18
0
Share

What Causes the Key to Get Stuck in an Automatic Transmission Car?

Here are the specific reasons why the key cannot be removed from an automatic transmission car: 1. The key cannot be removed after turning off the engine because the gear shift is not fully returned to the P (Park) position, meaning it does not actually trigger the electronic sensor. 2. There may be objects like coins obstructing the gear shift slot, preventing it from returning to position. Check the gear shift slot for any foreign objects, remove them, and then move the gear shift again to ensure it is fully returned to position. Here is additional information on why a car key might not turn: 1. After starting the vehicle with the key, the steering wheel automatically unlocks. Sometimes, if the steering wheel is turned to a certain angle when parked, it may align in a way that allows the key to turn for ignition but not unlock the steering wheel, making it seem stuck. To resolve this, gently turn the key with your right hand while lightly rotating the steering wheel with your left hand—this will naturally unlock the steering wheel. 2. After turning off the engine, if the steering wheel is turned left or right or if the wheels are not aligned straight when parked, external force can cause the steering wheel to move, activating the steering wheel lock mechanism. This locks the steering column and the steering lock pin together, preventing the steering wheel from moving. Even if the key is inserted, it may not turn. This is part of the vehicle's anti-theft system, which locks the steering wheel when it detects a potential theft risk.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.