What are the new regulations for vehicle annual inspection in 2020?

Where is the cigarette lighter fuse located in the Equinox?

The cigarette lighter fuse in the Equinox is located in the engine compartment. Method to locate the cigarette lighter fuse: Open the engine hood, you will see the fuse box. Then open the fuse box - the back of the fuse box cover has a fuse circuit diagram. Follow the diagram to locate the cigarette lighter fuse. There's also a small white clip inside the box, which is specifically designed for fuse replacement. Classification of fuses: Automotive fuses are divided into high-current fuses and medium/low-current fuses. Medium/low-current fuses are more commonly seen in general vehicles, which can be further categorized into blade-type fuses, fork-bolt fuses, screw-type fuses, and tube-type fuses. Among these, the most frequently encountered are medium and mini fast-acting blade-type fuses.

20

5

Share

What is the difference between D1, D2, and D3 gears in automatic transmission?

Automatic transmission's D1, D2, and D3 refer to the low-gear modes of the transmission. D1 manually locks the car's gear in first gear, overriding the vehicle's automatic control. D2 locks the gear in second gear, not exceeding second gear, allowing the car to automatically switch between first and second gears. D3 locks the gear in third gear, allowing automatic switching between first, second, and third gears but not exceeding third gear. The scenarios for using D1, D2, and D3 are as follows: 1. D1 and D2 can be used when going uphill: On steep slopes, manually setting the gear to first or second gear, similar to using a manual transmission on a steep slope. Using low gears achieves higher torque, making it easier to climb the slope. In reality, this isn't the main purpose, as D gear can also accomplish this. Locking the gear has the advantage of preventing frequent gear shifts in D mode. 2. The benefit of D3 is faster response when overtaking: At a speed of 80 km/h, the gear is usually in 5th or 6th gear. If you want to overtake quickly, the automatic transmission will slowly downshift from 6th to 5th, 4th, and then 3rd, which takes time. By directly shifting to D3, the gear immediately changes to 3rd, providing the fastest response. The car accelerates instantly, and after overtaking, you can shift back to D mode. 3. The biggest advantage of D1 and D2 is their application on downhill slopes: When going downhill in D mode, even without pressing the accelerator, the car will gradually speed up, making it difficult to control and dangerous. However, when shifted to D2, the car descends slowly due to the resistance from the transmission and engine, improving safety and controllability. This is why some cars promote their hill descent control technology, which achieves the same effect with a simple button press.

10

3

Share

Where is the Bluetooth in older Subaru models?

Subaru's Bluetooth can be found on the main interface of the central control screen. Car Bluetooth: The Bluetooth technology in the car Bluetooth (English: Bluetooth) system is an extension of mobile phone Bluetooth technology, sharing the same transmission system. Car Bluetooth is an in-car wireless hands-free system designed and developed based on wireless Bluetooth technology. Functions of Car Bluetooth: The function of car Bluetooth is to automatically identify mobile phones, enabling connection with the phone without the need for cables or phone holders; the owner can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can communicate through the car's audio system.

18

3

Share

What is the actual measured ground clearance of the Talagon?

The actual measured ground clearance of the Talagon is 200mm. Below are the concept of ground clearance and the characteristics of different ground clearance heights: Concept of ground clearance: Ground clearance refers to the distance between the ground and the rigid objects at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unloaded or loaded. Ground clearance is categorized into unloaded and loaded conditions. The ground clearance when loaded is also known as the minimum ground clearance, which refers to the shortest distance between the lowest protruding point of the vehicle's chassis and the ground when the vehicle is parked horizontally under the rated full load condition. Characteristics of clearance height: Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with smaller ground clearance have a lower center of gravity but poorer off-road capability. Vehicles with larger ground clearance have better off-road capability. A higher ground clearance not only improves performance on gravel and mountain roads but also helps prevent water from entering the exhaust pipe when driving through flooded roads and makes it easier to park on curbs or parking spaces with height differences.

8

3

Share

Where is the steering angle sensor located on the Skoda Octavia?

At the clock spring. It can be seen after removing the steering wheel. Introduction to the steering angle sensor: A device used to determine the angular position of a shaft, such as a steering column, which includes a coil set, coil support, and a coupler element. The coupler element has a coupler angular position related to the angular position of the shaft. The coil set includes a transmitter coil and at least one receiver coil. The coupler element changes the inductive coupling between the transmitter coil and the at least one receiver coil. Function of the automotive steering angle sensor: The automotive steering angle sensor is used to detect the rotation angle and direction of the steering wheel. Whether the steering wheel is turned left or right, it will be detected by the steering angle sensor, enabling the vehicle's electronic control unit to issue the correct steering commands. The rotation angle of the steering wheel provides the basis for the vehicle to achieve the desired steering amplitude, allowing the car to drive according to the driver's steering intentions.

7

2

Share

What is the fuel consumption of the new Transit gasoline version?

New Transit fuel consumption per 100 kilometers: 8.7L/100km. How to calculate car fuel consumption: Fill up the car's gasoline tank completely and reset the odometer to zero. After driving for a period of time, refill the tank and note how many liters of gasoline were added. Then, divide the amount of gasoline added by the distance traveled to get the fuel consumption per kilometer. Reasons for high fuel consumption: The driver's skill level, improper gear shifting and excessive braking during driving can artificially increase engine power loss. Frequent braking also leads to more starts, as fuel consumption rate is very high during acceleration. Driving at low temperatures: cars require the engine to operate at normal temperatures. If driving starts without proper warm-up, the engine remains at low temperature, resulting in poor fuel atomization and incomplete combustion.

15

4

Share

What are the new regulations for vehicle annual inspection in 2020?

Where is the cigarette lighter fuse located in the Equinox?

What is the difference between D1, D2, and D3 gears in automatic transmission?

Where is the Bluetooth in older Subaru models?

What is the actual measured ground clearance of the Talagon?

Where is the steering angle sensor located on the Skoda Octavia?

What is the fuel consumption of the new Transit gasoline version?

What is the wheelbase of the Lamando?

What is the fuel consumption per 100 kilometers for a Lamborghini?

Can the T-Roc use 92 octane gasoline?

Where is the Fuse Location for the Lamando Cigarette Lighter?